1. Zeiker

    OP Zeiker Newbie
    Newcomer

    Joined:
    May 28, 2020
    Messages:
    4
    Country:
    Argentina
    I am starting into the cfw thing. I can not start hekate. It seems like it is not recognizing my sd. I tried with two different sd both of 2gb but different brands. I tried the latest version of hekate and i put the bootlader folder into the sd. I tried with both exfat and fat32 formats. What could be wrong ? maybe my sd cards? i only have those and i do not want to buy a bigger one until i test that this works. Could be a hardware thing ? i heard that could be something about it but i do not want to disassemble my console and in ofw it recognizes both sd so maybe it is not the case. i do not know what else to do please help.
     
  2. bodefuceta

    bodefuceta GBAtemp Fan
    Member

    Joined:
    Apr 3, 2018
    Messages:
    357
    Country:
    Brazil
    What do the yellow letters say? They appear on console? Try injecting from a different device.
     
  3. Zeiker

    OP Zeiker Newbie
    Newcomer

    Joined:
    May 28, 2020
    Messages:
    4
    Country:
    Argentina
    It says :
    Missing lp0 (sleep mode) library!

    Missing or old Minerva library!

    Update your bootloader folder!

    press any key...

    yes it is on console. What device ? a cell phone? how?
     
  4. Sora Takihawa

    Sora Takihawa Planeptunes Male CPU
    Member

    Joined:
    Oct 11, 2015
    Messages:
    2,977
    Country:
    Germany
    remove hekate and install plain ams and sigpatches...maybe that works
     
  5. Zeiker

    OP Zeiker Newbie
    Newcomer

    Joined:
    May 28, 2020
    Messages:
    4
    Country:
    Argentina
    The thing is i'm a noob haha. With ams do you mean atmosphere? it is not suppossed that atmosphere should be installed once you create emummc with hekate? and also can i create a partition for emummc with a 2gb sd?. I only wanted to test if i could enter into hekate and then i would buy a 64gb sd to do the partition and everything else but now i'm afraid that even with a better sd it won't work.
     
  6. Sora Takihawa

    Sora Takihawa Planeptunes Male CPU
    Member

    Joined:
    Oct 11, 2015
    Messages:
    2,977
    Country:
    Germany
    tell me first what did you downloaded and installed?
     
  7. C7XL

    C7XL Advanced Member
    Newcomer

    Joined:
    Mar 27, 2020
    Messages:
    51
    Country:
    United States
    It's not installed automatically, you need to put the files in your SD Card after the creation of emuMMC.

    I don't think 2GB would work for creating emuMMC:
     
  8. Sora Takihawa

    Sora Takihawa Planeptunes Male CPU
    Member

    Joined:
    Oct 11, 2015
    Messages:
    2,977
    Country:
    Germany
    2GB is Waaaaaay do small you need atleast a 64gb sd due the EMMC can be up to 32gb

    — Posts automatically merged - Please don't double post! —

    nvm @C7XL quoted that
     
    ELY_M likes this.
  9. Zeiker

    OP Zeiker Newbie
    Newcomer

    Joined:
    May 28, 2020
    Messages:
    4
    Country:
    Argentina
    I supposed that. The thing is that it seems hekate does not recognize my sd and i am afraid that will happen with a bigger sd too. Maybe my sd are bad quality? I want to buy a 64gb sandisk micro sd xc, do you think that is good enough ?
     
  10. Ninn

    Ninn GBAtemp Fan
    Member

    Joined:
    Dec 1, 2006
    Messages:
    432
    Country:
    Japan
    Could you guys point me in the right direction?
    I just did create emummc with latest hekate on a switch on latest firmware, and it went fine, but i can't launch it. I get the "no main boot entries found" when i press "launch".

    IMG_20200528_155644.jpg
     
  11. Sora Takihawa

    Sora Takihawa Planeptunes Male CPU
    Member

    Joined:
    Oct 11, 2015
    Messages:
    2,977
    Country:
    Germany
    i have a 400gb sandisk
     
  12. C7XL

    C7XL Advanced Member
    Newcomer

    Joined:
    Mar 27, 2020
    Messages:
    51
    Country:
    United States
    You need a hekate config file (hekate_ipl.ini) in your bootloader folder.
     
  13. Ninn

    Ninn GBAtemp Fan
    Member

    Joined:
    Dec 1, 2006
    Messages:
    432
    Country:
    Japan
    I have it there, but not sure what to do with it.
    hek1.png
     
  14. AD2076

    AD2076 GBAtemp Regular
    Developer

    Joined:
    Feb 19, 2019
    Messages:
    116
    Country:
    Italy
    Code:
    {------ Atmosphere EmuMMC------}
    [Atmosphere EmuMMC]
    payload=bootloader/payloads/fusee-primary.bin
    kip1patch=nosigchk
    fullsvcperm=1
    atmosphere=1
    logopath=bootloader/Atmosphere.bmp
    icon=bootloader/res/icon_Atmosphere.bmp
    {}
    [Atmosphere FSS0 EmuMMC]
    fss0=atmosphere/fusee-secondary.bin
    kip1=atmosphere/kips/*
    logopath=bootloader/Atmosphere.bmp
    icon=bootloader/res/icon_Atmosphere_hekate.bmp
    add these lines to your hekate config. You'll have 2 boot entries:
    • the first chainloading fusee-primary
    • the second uses fss0 method
    choose one and use the proper sigpatches for the method you choose.
     
    Ninn likes this.
  15. Ninn

    Ninn GBAtemp Fan
    Member

    Joined:
    Dec 1, 2006
    Messages:
    432
    Country:
    Japan
    Thanks, ill give this a try.
     
    Last edited by Ninn, May 28, 2020
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - letters, payload, yellow