Switch Lite RP2040 boot hekate, but not atmosphere

[Mauroz]

Hi at all, have a switch lite with rp2040. Switch boot into hekate, i set time and date, create and enabled emunand, but when i try lauch cfw or ofw always switch reload haekate. If from menù hekate i selecet reboot to ofw switch boot into ofw, and if i select reboot normal, switch reload hakate. I have tryed 2 different micrdo SD samsung, formatted in FAT32 with guiformat-x64. Somone can help me. Thanks

 

[redmagejosh]

Hi at all, have a switch lite with rp2040. Switch boot into hekate, i set time and date, create and enabled emunand, but when i try lauch cfw or ofw always switch reload haekate. If from menù hekate i selecet reboot to ofw switch boot into ofw, and if i select reboot normal, switch reload hakate. I have tryed 2 different micrdo SD samsung, formatted in FAT32 with guiformat-x64. Somone can help me. Thanks

What does your Hekate_ipl.ini looks like? It should be inside the bootloader folder in the root of your SD card.

 

[Mauroz]

Yes i have Hekate_ipl.ini into bootloader folder in the root of SD card. I use always the same package, but this time atmosphere don' start

Post automatically merged: Dec 20, 2023

If i choose payload into hekate menù and select fusee.bin start with atmosphere.

 

[Mauroz]

This is my Hekate_ipl.ini
[config]
autoboot=0
autoboot_list=0
bootwait=3
backlight=100
autohosoff=0
autonogc=1
updater2p=1
bootprotect=0

{--- Stock ---}
[OFW on Device Memory]
fss0=atmosphere/package3
stock=1
emummc_force_disable=1
icon=bootloader/res/stock_boot.bmp

{------ Atmosphere ------}
[CFW on MicroSD Card]
fss0=atmosphere/package3
kip1patch=nosigchk
cal0blank=1
emummcforce=1
icon=bootloader/res/emummc_fss0_boot.bmp

{------ Atmosphere ------}
[CFW on Device Memory]
fss0=atmosphere/package3
kip1patch=nosigchk
cal0blank=1
emummc_force_disable=1
icon=bootloader/res/sys_fss0_boot.bmp

{------ Atmosphere ------}
[Emu if Enabled - Sys if Not]
payload=bootloader/payloads/fusee.bin
icon=bootloader/res/fusee_boot.bmp

{}

I have try to edit this part
{------ Atmosphere ------}
[CFW on MicroSD Card]
fss0=atmosphere/package3
kip1patch=nosigchk
cal0blank=1
emummcforce=1
icon=bootloader/res/emummc_fss0_boot.bmp

to
{------ Atmosphere ------}
[CFW on MicroSD Card]
fss0=bootloader/payloads/fusee.bin
kip1patch=nosigchk
cal0blank=1
emummcforce=1
icon=bootloader/res/emummc_fss0_boot.bmp


but with this edit have the same problem, only start hekaye and nor ofw or cfw.
For start cfw i need choose payload and fusee.bin, and if i rename fusee.bin to payload.bin and put it into root of SD switch don' t start, have a black screen. I replace with hekate 6.0.7 (payload.bin) and start hekate... but with the same prblem, somone have idea how to solve?
Thanks

 

[kendellbmt]

I have 2 nintendo switch lite and have this problem, are you fix it?