Getting wifi on desmuME

GETTING WIFI TO WORK ON DESMUME

First you will need a couple of things:

A Computer(of course)
A wired internet connection (via LAN cable)
Win PCap(PROVIDED)
A wi-fi compatible DesmuME(PROVIDED)
Any wi-fi compatible game.(DO NOT ASK FOR ANY LINKS TO ROMS OF COURSE....)




STEP 1 : Download this pack DesmuME wifi pack this contains Win Pcap and the other things you will need. Also a version 0.9.7 of desmuME with wifi capabilities enabled by slytherx HERE.Whichever version of desmume you are using ( 32 or 64 bit) in its own folder... along with any other files the emu may need in that same folder along with it.



STEP 2: Unzip contents and Install Win Pcap.After installation make sure and give Win Pcap exceptions in all firewall software..When installing Winpcap..check the option for starting the driver as windows starts up.



STEP 3: Open DesmuME(IMPORTANT NOTE....ALL WINDOWS 7/WINDOWS VISTA USERS MUST OPEN DESMUME AS AN ADMINISTRATOR OR ELSE AN ERROR WOULD OCCUR WHEN CONNECTING TO WIFI" and go to Config--->Emulation settings. Now set the correct paths for the ARM 7 BIOS, ARM 9 bios and Firmware bin...of course it would be wherever you downloaded it to...Make sure the "Use external Bios image" "Use external firmware image" ,"Boot from firmware like the nds" AND "Enabled Advanced bus level timing" are all checked...I am not sure about the rest so leave them unchecked.. It would now look like this...

http://img153.imageshack.us/i/setupg.png


STEP 4: IN desmuME still go to Conifg---> wifi and click on "Infrastructure mode"



STEP 5:Now open your game and go into Nintendo Wi-fi settings and search for an access point...u should see "SOFT AP" as one...test connection to that and it should work...I think this must be done every time you open/close the emulator....(Hey can't be too perfect)

STEP 6:Enjoy....
yaynds.gif


TRYFORCE's TUTORIAL ON GETTING WIFI TO WORK ON DesmuME ON ANDROID COMPATIBLE DEVICES

TryForce said:
Android users are in luck!!! I just tested WFC in pokemon black according to the op's tutorial except my connection to the internet is via USB tether to my Andoid phone!
I have a rooted MyTouch 3G (I'll try it on my new MyTouch 4g next week).
I'm running a hacked ver. of Cyanogen 6.1 Signed. I'm simply using Cyanogen mod's built-in USB tether.

Here's what I did:
a. Follow Lune's directions for DesmuME and winPcap setup.
b. Disconnect your current active internet connection.
c. Plug your 3g/4g data capable android device into a USB (2.0) port in your PC.
d. Set your phone to tether via USB. In Cyanogen 6.1 this can be done via Settings->Wireless & networks->Tethering. Check the box next to usb tethering.
e. Verify that you have established an internet connection. Windows 7 sees my device as a network adapter called "Remote NDIS based internet sharing device". Regardless of the device ID, you should have a valid IP and be able to browse the web.
f. Restart Windows (This is necessary to let winpcap work "its magic").
g. Don't forget to run desmume as administrator in Windows 7/Windows vista!!
h. In desmume's wifi settings (config->wi-fi), you should see your android device's manufacturer in the dropdown box. Mine simply said "HTC". Select it.
i. You should be set!

Again, this was tested on a rooted mytouch 3g running Cyanogen 6.1. Results may vary. I can probably help some people who need it. For more information about rooting your android device, check out the cyanogen mod forums (make sure you understand the risks involved).

Thanks for this tut, Lune!


Video of me on gts in Pokemon White
Went on GTS

Video of a wifi battle on Pokemon white (lost of course..):
Wfi battle

NOTE:AGAIN I HEARD THIS ONLY WORKS FOR WIRED CONNECTIONS you could try on wireless i guess...


GAMES TESTED SO FAR:

Pokemon White/Black:Works good was able to do random battle and go on gts...i think union room has Anti piracy stuff in it but didnt try it..
Mario kart DS:For some reason everything goes well but race never starts
Yugioh World Championship 2011:Over the nexus : Works very good no problems..
Tetris Ds:Works great


ERROR TROUBLESHOOTING

BEFORE ANY OF THE FOLLOWING MAKE SURE THESE THINGS ARE DONE FIRST:
-Again..have a wired connection by a cable (lan cable)
-Run desmuME as an administrator
-"For anyone getting 'Unable to get IP address' or 'Unable to connect to Nintendo Wi-fi network' errors, you need to check your router firewall settings. I use DD-WRT and an enabled SPI Firewall will not allow you access, disabling that let everything work fine.(by Forumpost)
-Disabling any firewalls that you think would be blocking the process...
-WINDOWS 7/WINDOWS VISTA users must go to network and sharing center and make sure that your connection type is set to HOME network and NOT PUBLIC OR WORK(work may work but meh)
-In the Wi-fi settings in desmume make sure it is set ton infrastructure mode and also the correct bridging is enabled with your ETHERNET CONTROLLER (your network adapter)
- Try pressing tab when connecting to nintendo wi fi connection..weird but might work

Emulator doesn't save: You would have to go into PATH SETTINGS and set your own paths for screenchots,cheats,roms,saveram etc.

Error Code 52000/52001/52002:Check your modem status and change it from bridging to PPPOE or PPPOA(sometimes work).Also double check the WEP key you entered(if used).Make sure if your on windows 7 that you have run the emulator as an administrator and also check that it's connection is an exception in your firewall/antivirus software

Error Code 52100:There could be Ip address conflict going on...you will have to give your ds its own ip address rather than using dhcp to find its own..check HERE
for help on doing that(too long to type..).Also you can try chaging the dns to 4.2.2.2 4.2.2.3 4.2.2

Error with saving wifi settings: "try keeping the external bios and firmware but without booting to ds on."

CREDITS GO TO:
DJPlace:Testing Mario kart ds
Dreamboy21: For information on the firewall exceptions and testing Tetris Ds
ryuga93:Info on error 52000
slytherx: HUGE THANKS for compiling the 0.9.7 version to use wi-fi
Forumpost: For information on disabling firewall in router settings
soc4real: For information on bridging connection with Ethernet controllers.
Tryforce:Another HUGE THANKS for tutorial on getting wi-fi to work using android devices.
Chojo: with help on error 52100
Jayc & 007 shinobi: Help on getting wifi settings to save
kay2kid: on help in "speed up connect" method
 

kai279

New Member
Newbie
Joined
Aug 23, 2011
Messages
2
Trophies
0
XP
1
Country
Gambia, The
deleting the firmware.dfc helped with my first problem, but when i try to do the connection test it shows me error code 20104 maybe theres a problem with my winPcap?
 

KSlove

New Member
Newbie
Joined
Aug 23, 2011
Messages
2
Trophies
0
XP
1
Country
Malaysia
I am getting error 20104 as well, but no matter what methods I tried(available online) were to no avail to solve the error. So i am wondering is anyone still successfully connected to pokemon wi-fi for now?
 

leoinpharoh

New Member
Newbie
Joined
Sep 2, 2011
Messages
1
Trophies
0
XP
1
Country
United States
hey guys, ive been reading through here (for about 4 hours now) trying to get this to work on my wireless connection, simply because its my neighbors connection cuz my fathers cheap and wont get internet out here, anyway... i keep getting the same error, and i know its cuz you guys keep saying i need a tethered or bridged connection with an ethernet cord, and well, i just dont wanna mess with that cuz i really think my neighbor would notice a long ass cord going from their window to my house XDD, anyway...i also saw some people talking about not being able to access their save files because the new emulator wont read them... simply go to your old emu's battery file, copy, or cut the files there, and paste them in the same file as your emu is in... it might not work right away so just close out of your emu and bring it back up... hope i at least helped someone out there ^.^
 

Sky*dragon

Well-Known Member
Newcomer
Joined
Nov 29, 2010
Messages
84
Trophies
0
Location
in the sky
XP
140
Country
Libya
hi
first i want to say thanks for the hardworking and the tut
smile.gif

second ihave been using wifi since 2010 and iwas going to do atut about wifi but since you did its ok
anyway the ver of my wifi desmume is 0.9.6 it connect to wi-fi and all butit never saves config it realy bugs me so does any one have a sloution for this problem please help me
and does anyone knows how to use ds wireless?
 

kotsos13

New Member
Newbie
Joined
Oct 5, 2011
Messages
3
Trophies
0
XP
1
Country
United States
I have a problem with the connection!After i get the message "connection successful" the softAP is immediatelly disconnected!Why is this happening?I use a pokemon pearl rom!

 

gunbomb90

Member
Newcomer
Joined
Oct 27, 2009
Messages
12
Trophies
0
XP
46
Country
Malaysia
Dude, theres just a problem that Im facing. I have used the desmume 0.96 previously and I downloaded 0.97. The main problem is my save files cant be detected, load state..and etc. How can I transfer my save files over?
 
D

Deleted-236924

Guest
I have a problem with the connection!After i get the message "connection successful" the softAP is immediatelly disconnected!Why is this happening?I use a pokemon pearl rom!

That's perfectly normal.

............................................________
....................................,.-'"...................``~.,
.............................,.-"..................................."-.,
.........................,/...............................................":,
.....................,?......................................................\,
.................../...........................................................,}
................./......................................................,:`^`..}
.............../...................................................,:"........./
..............?.....__.........................................:`.........../
............./__.(....."~-,_..............................,:`........../
.........../(_...."~,_........"~,_....................,:`........_/
..........{.._$;_......"=,_......."-,_.......,.-~-,},.~";/....}
...........((.....*~_......."=-._......";,,./`..../"............../
...,,,___.\`~,......"~.,....................`.....}............../
............(....`=-,,.......`........................(......;_,,-"
............/.`~,......`-...............................\....../\
.............\`~.*-,.....................................|,./.....\,__
,,_..........}.>-._\...................................|..............`=~-,
.....`=~-,_\_......`\,.................................\
...................`=~-,,.\,...............................\
................................`:,,...........................`\..............__
.....................................`=-,...................,%`>--==``
........................................_\..........._,-%.......`\
...................................,
 

leafbarrett

Member
Newcomer
Joined
Jul 6, 2009
Messages
16
Trophies
0
XP
201
Country
United States
I keep getting error 52000/1/2, no matter what I try. I tried every fix listed, and I know it's capable of working- it worked the very first time I tried it, but has failed for every other attempt. I don't know what else to try. Any ideas?
I'm using a Pokemon Black rom, if you're wondering.
 

gunbomb90

Member
Newcomer
Joined
Oct 27, 2009
Messages
12
Trophies
0
XP
46
Country
Malaysia
Hey dude, got some issue here..everything is done from step one until the end, I even turned off my firewall and anti virus..run as admin. Well, my prob is when I test the connection, it was detected and has full bars but after a while it turns red...and I get error code 52000. How can i solve this
 

KoRny-K1

New Member
Newbie
Joined
Nov 12, 2011
Messages
1
Trophies
0
XP
1
Country
Canada
Hey. First, thanks alot for this, its awesome!

Second of all I'm getting a "error code 50099" No access point in range.

And also do you NEED "A wired internet connection (via LAN cable)"
Thanks again...
 

tariko155

New Member
Newbie
Joined
Dec 13, 2009
Messages
2
Trophies
0
XP
45
Country
Antigua and Barbuda
hi i have the 52100 error :O tried the +10 digits tutorial but it still didn't work (i am pretty sure i have ethernet lan connection) so what info do u guys need in order to help me? i rly wana try the wifi and evolve some of my pokemons that require trade >
 
P

passlogin

Guest
@kotsos13

but you have wifi....
where i can download your version? 0.9.6 svn0 i search on google but nothing
 

utslerrichard

New Member
Newbie
Joined
Nov 23, 2011
Messages
3
Trophies
0
XP
4
Country
United States
Ok so i have did everything. step by step... when i test connesting it gives me the choice to click yes or no then when i click yes it disconnects ? any fix for this :P
 

theraiders1995

New Member
Newbie
Joined
Nov 28, 2011
Messages
1
Trophies
0
XP
1
Country
United States
Hello everyone im new here and i need some help with getting wifi on desmume. Sorry im late but if anyone is there please help. Im trying to play pokemon soulsilver wifi on desmume and i tried everything but i keep getting error code 20104. I have a windows 7 32 bit computer and followed all the steps. I already installed wincap, ran desmume as administrator, disabled firewalls, changed the wifi and emulation settings in desmume, connected computer to internet by connecting cable to router and i keep getting the same error. The furthest i got was when i tested the softap connection and the command pront said Softap connected, then something about detected request to something, then detected request to something else again, and then it waits like 10 seconds, disconnects and the game says error 20104 and that i should visit nintendo website. Other information you might need is that i have a router with dhcp security, i think thats affecting it because the physical ds cant connect to it because it doesnt support it but i dont know. Also i play pokemon on nogba and save it in a slot and i open it in desmume by clicking "import external save"(i think thats what it says). Sorry its so long but if anyone can help me i would apreciate it .
 

gunbomb90

Member
Newcomer
Joined
Oct 27, 2009
Messages
12
Trophies
0
XP
46
Country
Malaysia
Hello everyone im new here and i need some help with getting wifi on desmume. Sorry im late but if anyone is there please help. Im trying to play pokemon soulsilver wifi on desmume and i tried everything but i keep getting error code 20104. I have a windows 7 32 bit computer and followed all the steps. I already installed wincap, ran desmume as administrator, disabled firewalls, changed the wifi and emulation settings in desmume, connected computer to internet by connecting cable to router and i keep getting the same error. The furthest i got was when i tested the softap connection and the command pront said Softap connected, then something about detected request to something, then detected request to something else again, and then it waits like 10 seconds, disconnects and the game says error 20104 and that i should visit nintendo website. Other information you might need is that i have a router with dhcp security, i think thats affecting it because the physical ds cant connect to it because it doesnt support it but i dont know. Also i play pokemon on nogba and save it in a slot and i open it in desmume by clicking "import external save"(i think thats what it says). Sorry its so long but if anyone can help me i would apreciate it .
Well, had the same prob with you. What pokemon your playin? The people wont reply us, they dont even bother anymore
 

FTR

New Member
Newbie
Joined
Jan 6, 2012
Messages
1
Trophies
0
XP
1
Country
Poland
Hello,

I have problem with desmume and wifi. I am doing everything correct and I am still getting error 52000. I am using windows xp. I turned off my firewall and antywirus. I have wired internet connection (via modem).

So please anyone help me. I can post some screenshots of my settings if needed etc.

btw. I dont really undrestand this lane.

Check your modem status and change it from bridging to PPPOE or PPPOA(sometimes work).Also double check the WEP key you entered(if used).Make sure if your on windows 7 that you have run the emulator as an administrator and also check that it's connection is an exception in your firewall/antivirus software

How to change bridging? And what it is wep key?
 

memoryofds

Active Member
Newcomer
Joined
Jul 11, 2009
Messages
39
Trophies
0
XP
125
Country
Gambia, The
Hi people,

I trief DesMume Rev 4138, he says connectiontest was succesfull, but when i try to get online withPokemon white it stucks after the save window.
I also tried to get online with DesMume Rev 4153, but I always get this 52000/ 52100 error.


The did the steps of troubleshooting but it didnt help. The people who got it to work, which Revision are u using?
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • BakerMan
    The snack that smiles back, Ballsack!
    BakerMan @ BakerMan: wtf is the point of banning swearing in games? that's utterly a dumb decision the new...