Oh I should also mention that I'd be willing to do the appropriate children supports for their parents (if applicable ofc)
Special supports between Velour and her other dad :')
ROM Hack Fire Emblem Fates Expanded Same-Sex Marriage Patch [WIP]
- Thread starter UnassumingVenusaur
- Start date
- Views 880,724
- Replies 2,278
- Likes 71
Special supports between Velour and her other dad :')
Use this version of braindump, it gives you a romfs.bin and exefs.bin instead.
@UnassumingVenusaur
Did you miss my private message from some time back? Maybe I missed your response?
I sent you a revised support (for awakening, though) from the last one I submitted, but never got feed back. Did you add it to the next version?
Or, more likely, do I need to revise it some more?
Did you miss my private message from some time back? Maybe I missed your response?
I sent you a revised support (for awakening, though) from the last one I submitted, but never got feed back. Did you add it to the next version?
Or, more likely, do I need to revise it some more?
Last edited by that girl,
, Reason: adding target
My apologies for bothering, but I seem to be having a bit of trouble. I don't know whether there isn't any Kamui support conversations or whether something is wrong. I have a female Kamui and have tried getting S support with several Female characters, and they have no support dialogue, just a simple fade to black and S is unlocked. This doesn't happen when I hook up, say, Sakura and Hana. Just wanted to know whether there's something wrong or if Female Kamui has no support dialogue to begin with.
The added convos so far for a female MU are:
You can find the full list of added conversations in the changelog in the OP. It's pretty limited right now because the patch is in an early state.
Last edited by Jalathas,
For anyone who's using the NTR CFW version of the hack - do you have issues with soft resetting Fates or re-opening it after closing the software? Seems like I can never open it again without rebooting my 3DS altogether, which can be inconvenient.
I might try going for the arm9loaderhax/getting CFW sysnand and seeing if that changes anything. I've seen reports that NTR doesn't work with the CakesFW setup since the one in Plailect's guide uses native firm 10.4 while NTR is on 10.2? I think AuReiNand should work with it, though. I'll double check, and I'll report my efforts once I'm done! It's a pain having to soft reset all the time if you mess up in-game, especially if you're playing on Classic mode.
For NTR, try using the cia of 3.3, but then try using ntr.bin from the official 3.2 release, do note that 3.3 is not official and is instead a fork.
Yeah, I am using Shadowtrance's 3.3 fork already. I haven't actually tried the official one yet, so maybe I should do that first. Thanks!
Hi, so I've been following this hack for some time, and I know you haven't figured out how the endings work yet, and well, I've been messing with the txt file for a while now and lo and behold:
Sorry about the typos I made, I did this a little too quickly. There's one big problem with the endings though, and that's that no f/f pairings will show up, unless paired with Azura or F!Avatar. I really have no idea why that happens, but yeah, female units that are S ranked with a female unit that can't have kids, will not show up in the endings. It's a real bummer, and I don't know how to fix it. My gut tells me that this might be able to be solved through hex editing, but I don't know much about that. Anyways, here are the details on how the txt files work:
And that's that. I've attached the endings txt file I've been working with, in case it's needed for cross reference, but the majority of it's still the same since I'm still working on it. I hope this helps, and I'll keep trying to find a solution to the f/f pairings not showing up.
Progress!!
So, same sex marriages are actually labelled in the endings file, just like how revelations' endings are labeled and the awakening kids' spouses are labeled. Here are some pictures ad explanations of what I mean by labels:
To specify a little further on the use of the same-sex label (red), basically you have to make an entire copy of the original line for the ending, and then add the label. Like so:
The picture is an example of Kaze's endings, the pink lines are the original lines, and the light blue lines are the edited lines. The edited lines are basically just a copy of his original endings, just with the necessary added labels. So basically, the first edited line is his ending for any same-sex spouse, while the second edited line is only for the third route, and only for m!avatar. You have to keep the original unedited lines, if you don't either the game will crash, or the hetero couples just won't have endings.
I haven't tested this yet, but I assume that if you want to add an ending for an awakening kid and a male character (or female for Severa), you would have to add the same-sex label and the awakening label (the blue and green labels) to a new line of the spouse's ending. Like so:
Like I said before, for pairing up Odin and Laslow I think you need to make a new line with the same-sex label and the awakening label for the both of them, but I'm not sure, I'll test this after typing out this post.
EDIT: For Odin and Laslow, adding in just the same-sex label will work in activating their ending, you don't need to add the awakening label.
And finally, the last thing left would be the ending for the avatar. So without making these changes, if the avatar S supports with a character that's the same gender, you'll always get the same ending, one about Rhajat or Niles depending on the gender of your avatar. This is because IS obviously didn't have plans to make more than two gay options, so the ending for the same-sex option always says Rhajat or Niles.
You can change this, but you can't specify who the avatar is marrying, as the same line will be used for every same-sex S rank. In the example photo you can see that all I did was say that my F!Avatar and Azura ruled as Queens. (ignore the rogue Rae I forgot to erase an $Nu). Here's one last example of some edited Avatar endings that I changed (you can change it to whatever you want though):
- The red box is the label for revelation endings, these are specifically for characters married to the avatar in the third route.
- The blue box is the label for same-sex marriages, this is what you need to use so that the endings for same-sex married characters actually show up!
- The green box is the label for awakening characters. That label is used specifically for awakening characters' spouses . I'm not entirely sure how the labeling would work if you paired Odin and Laslow together, but I think you have to use both the blue label and the green label, I haven't tested this though so it may or may not work.
To specify a little further on the use of the same-sex label (red), basically you have to make an entire copy of the original line for the ending, and then add the label. Like so:
The picture is an example of Kaze's endings, the pink lines are the original lines, and the light blue lines are the edited lines. The edited lines are basically just a copy of his original endings, just with the necessary added labels. So basically, the first edited line is his ending for any same-sex spouse, while the second edited line is only for the third route, and only for m!avatar. You have to keep the original unedited lines, if you don't either the game will crash, or the hetero couples just won't have endings.
I haven't tested this yet, but I assume that if you want to add an ending for an awakening kid and a male character (or female for Severa), you would have to add the same-sex label and the awakening label (the blue and green labels) to a new line of the spouse's ending. Like so:
Like I said before, for pairing up Odin and Laslow I think you need to make a new line with the same-sex label and the awakening label for the both of them, but I'm not sure, I'll test this after typing out this post.
EDIT: For Odin and Laslow, adding in just the same-sex label will work in activating their ending, you don't need to add the awakening label.
And finally, the last thing left would be the ending for the avatar. So without making these changes, if the avatar S supports with a character that's the same gender, you'll always get the same ending, one about Rhajat or Niles depending on the gender of your avatar. This is because IS obviously didn't have plans to make more than two gay options, so the ending for the same-sex option always says Rhajat or Niles.
You can change this, but you can't specify who the avatar is marrying, as the same line will be used for every same-sex S rank. In the example photo you can see that all I did was say that my F!Avatar and Azura ruled as Queens. (ignore the rogue Rae I forgot to erase an $Nu). Here's one last example of some edited Avatar endings that I changed (you can change it to whatever you want though):
Last edited by Silrae,
Hi, so I've been following this hack for some time, and I know you haven't figured out how the endings work yet, and well, I've been messing with the txt file for a while now and lo and behold:
Sorry about the typos I made, I did this a little too quickly. There's one big problem with the endings though, and that's that no f/f pairings will show up, unless paired with Azura or F!Avatar. I really have no idea why that happens, but yeah, female units that are S ranked with a female unit that can't have kids, will not show up in the endings. It's a real bummer, and I don't know how to fix it. My gut tells me that this might be able to be solved through hex editing, but I don't know much about that. Anyways, here are the details on how the txt files work:Progress!!
And that's that. I've attached the endings txt file I've been working with, in case it's needed for cross reference, but the majority of it's still the same since I'm still working on it. I hope this helps, and I'll keep trying to find a solution to the f/f pairings not showing up.So, same sex marriages are actually labelled in the endings file, just like how revelations' endings are labeled and the awakening kids' spouses are labeled. Here are some pictures ad explanations of what I mean by labels:
- The red box is the label for revelation endings, these are specifically for characters married to the avatar in the third route.
- The blue box is the label for same-sex marriages, this is what you need to use so that the endings for same-sex married characters actually show up!
- The green box is the label for awakening characters. That label is used specifically for awakening characters' spouses . I'm not entirely sure how the labeling would work if you paired Odin and Laslow together, but I think you have to use both the blue label and the green label, I haven't tested this though so it may or may not work.
To specify a little further on the use of the same-sex label (red), basically you have to make an entire copy of the original line for the ending, and then add the label. Like so:
The picture is an example of Kaze's endings, the pink lines are the original lines, and the light blue lines are the edited lines. The edited lines are basically just a copy of his original endings, just with the necessary added labels. So basically, the first edited line is his ending for any same-sex spouse, while the second edited line is only for the third route, and only for m!avatar. You have to keep the original unedited lines, if you don't either the game will crash, or the hetero couples just won't have endings.
I haven't tested this yet, but I assume that if you want to add an ending for an awakening kid and a male character (or female for Severa), you would have to add the same-sex label and the awakening label (the blue and green labels) to a new line of the spouse's ending. Like so:
Like I said before, for pairing up Odin and Laslow I think you need to make a new line with the same-sex label and the awakening label for the both of them, but I'm not sure, I'll test this after typing out this post.
And finally, the last thing left would be the ending for the avatar. So without making these changes, if the avatar S supports with a character that's the same gender, you'll always get the same ending, one about Rhajat or Niles depending on the gender of your avatar. This is because IS obviously didn't have plans to make more than two gay options, so the ending for the same-sex option always says Rhajat or Niles.
You can change this, but you can't specify who the avatar is marrying, as the same line will be used for every same-sex S rank. In the example photo you can see that all I did was say that my F!Avatar and Azura ruled as Queens. (ignore the rogue Rae I forgot to erase an $Nu). Here's one last example of some edited Avatar endings that I changed (you can change it to whatever you want though):
WOW this must have taken so much work to figure out, thank you so much for doing this! I'm glad we have somewhat of a solution to the endings, though that's disappointing about F/F pairings. It was actually the same for Awakening, though-- F/F pairings wouldn't show up there either. I think it has to do with the endings being tied to the male character. Something honestly might have to change in the exefs.bin to fix it, for either game.
You're welcome! I'm sorry I can't be of more help on the f/f pairing dilemma, as hex editing is not my forte, but I'll keep looking through the txt file to see if there's anything helpful, just in case.
Yeah I don't have any experience editing the exefs.bin either, so we'd probably have to find someone else to do that.
I get the same issue as well - I'm running it under gateway emunand.
Also throwing it out there again - is there any documentation available anywhere on the support tables in the gamedata.bin?
Yep! Because the new line is only for same-sex marriage you can switch the wording to wife/husband, like how I did with Azura and my avatar. Just make sure to add in the right labels.
Last edited by Silrae,
what do you mean by this? could this fix the problem with having to reboot the console completely?
Similar threads
- No one is chatting at the moment.
