What's the matter?NutNut said:Someone gave me the v7alpha1 but the ciosmap.xml is not correct
What's the matter?NutNut said:Someone gave me the v7alpha1 but the ciosmap.xml is not correct
davebaol said:I believe your HDD is 512B sector size, not 4K.roubagalinhas said:these Cioses are causing me a lot of issues with my new hard drive toshiba canvio 2.5" usb 3.0 750GB (4k sector)
after launching the loader from homebrew channel or from the forwarder on wii's main menu, the canvio is detected and the program "freezes" (on startup screen)
this drive works fine with waninkoko and hermes cioses
also the d2x are working fine with my "old" western digital passport 2.5" usb 2.0 250GB drive, so it has to be a 4k sector issue
my favorite loader is cfg usb loader (tried different versions), but happens the same when using usb loader gx
In fact AFAIK waninkoko cios doesn't support 4K sector size.
And usually HDDs lower than 2TB have 512B per sector.
Also your issue is likely due to USB 3.0 which is not officially supported by any cios out there.
Finally give v7alpha1 a chance and let me know.
It's a syscheck issue, I guess.NutNut said:Only when scanning the slot containing v7alpah1
http://gbatemp.net/t277659-ciosx-rev21d2x-...t&p=3758163davebaol said:Ok thanks
EDIT:
Also I remember I had issue 1 with modules extension .APP instead of .app and viceversa.
So xml comments are likely supported already. Se my edit here: http://gbatemp.net/t277659-ciosx-rev21d2x-...t&p=3755315
It's true that the drive has 4k sectors internally. But I believe that it presents itself still as a 512 (virtual) sector size.roubagalinhas said:yes my drive has 4k sector, i've confirmed it
the drive inside the box is a TOSHIBA MK7559GSXP 750.1GB, which uses 4k sector
oggzee said:It's true that the drive has 4k sectors internally. But I believe that it presents itself still as a 512 (virtual) sector size.roubagalinhas said:yes my drive has 4k sector, i've confirmed it
the drive inside the box is a TOSHIBA MK7559GSXP 750.1GB, which uses 4k sector
You can make a quick check, in cfg loader go into system settings there is a info tab and below a debug tab, select that and after IOS, MEM and TIME stats should be DEBUG LOG and there you can find something like:
open(/dev/usb2)=3 init:0 cap:1953525167 ss:512
ss: is sector size, check if that says 512 or 4096?
roubagalinhas said:i'll just have to grow my nails to try this method. i asked my aunt but her nails here too soft, and it was a no go
http://www.youtube.com/watch?v=6YYCrFwMrEU
Thanks, this way I can relax my tired thumb and above all add a comment to explain the new patch.dragbe said:bug fixeddavebaol said:Can you make slot 249 the default one instead of 200?
done
QUOTESo xml comments are likely supported already
::IRQ4 patch always on when ciosversion is 21007 or higher, to disable it change below line from "=on" to "=off"
set IRQ4patch=on
::Note that the default is "on" when a d2x-beta.bat file is not found, but even when "on" if the cIOSversion is 21006 or lower the patch will not be applied