Finally got everything in order to try this...
Did the following:
1) Format your SD card to FAT16. Copy the contents inside the sd folder to the root of your SD card
2) Insert the SD card in the Wii and go to Data Management>Channels>SD Card press YES on the dialog box that asks to load boot.dol
3) Install the Homebrew Channel and install BootMii as boot2 if possible or as an IOS if boot2 is not available.
4) Launch Bootmii (if you installed to boot2 just reset the system if you installed to IOS go to the HBC and press the Home button)
5) Open the config menu (gears) and choose backup NAND (green arrow) wait for it to finish and restart the Wii
I did the first 3 steps w/ no problem.. Installed HBC and installed BootMii as "boot2".. Didn't know what to do after that so just held the power button on my remote to shut down and then turn it back on with my WiiMote... It came back up to the BootMii menu but my WiiMote doesn't work.. I press a button and all the lights just light up but doesn't connect to the console..
What'd I do wrong?
EDIT: Sorry... You need to use a GC controller or the actual power/reset/eject buttons on the Wii (for those that don't know).
Did the following:
1) Format your SD card to FAT16. Copy the contents inside the sd folder to the root of your SD card
2) Insert the SD card in the Wii and go to Data Management>Channels>SD Card press YES on the dialog box that asks to load boot.dol
3) Install the Homebrew Channel and install BootMii as boot2 if possible or as an IOS if boot2 is not available.
4) Launch Bootmii (if you installed to boot2 just reset the system if you installed to IOS go to the HBC and press the Home button)
5) Open the config menu (gears) and choose backup NAND (green arrow) wait for it to finish and restart the Wii
I did the first 3 steps w/ no problem.. Installed HBC and installed BootMii as "boot2".. Didn't know what to do after that so just held the power button on my remote to shut down and then turn it back on with my WiiMote... It came back up to the BootMii menu but my WiiMote doesn't work.. I press a button and all the lights just light up but doesn't connect to the console..
What'd I do wrong?
EDIT: Sorry... You need to use a GC controller or the actual power/reset/eject buttons on the Wii (for those that don't know).