Hacking RELEASE [Official] ReiNX thread [DEAD]

dss862 · Dec 12, 2018

after installing the game on the sd card the game require update before using it.. what's the safe way to update the system firmware offline? iam on 4.1.0 Firmware... iam afraid if i update my firmware to higher one .. there will be no way to go back to lower firmware.. and jailbreak will be not be possible please help

a9lh-1user · Dec 12, 2018

@Dothackjhe
You can't post a link to that side!
It is forbidden here!

Dothackjhe · Dec 12, 2018

a9lh-1user said:
@Dothackjhe
You can't post a link to that side!
It is forbidden here!

I did not know, sorry.

a9lh-1user · Dec 12, 2018

Then please take your time and read this:
https://gbatemp.net/help/terms

Draxzelex · Dec 12, 2018

dss862 said:
after installing the game on the sd card the game require update before using it.. what's the safe way to update the system firmware offline? iam on 4.1.0 Firmware... iam afraid if i update my firmware to higher one .. there will be no way to go back to lower firmware.. and jailbreak will be not be possible please help

Update your firmware with the homebrew application ChoiDujourNX.

dss862 · Dec 13, 2018

How could u update with choidujourNX all the contents of choidujourNX are just folders?

Draxzelex · Dec 13, 2018

dss862 said:
How could u update with choidujourNX all the contents of choidujourNX are just folders?

ChoiDujourNX is a homebrew app aka a .NRO file. You would place it where all other Switch homebrew applications which is the /Switch folder.

If you are referring to the firmware files, those have to be obtained elsewhere because they are considered copyrighted content and cannot be provided on this forum, even through PM. However the OP of the ChoiDujourNX thread offers several hints on where to obtain such files.

spedzilla · Dec 13, 2018

so if we already have ReiNX installed on 6.0.0 are we able to upgrade to 6.2.0 using ChoiDujourNX and then use ReiNX toolkit to update it to 2.0 or should i update ReiNX first before updating firmware? little confused on what steps to take to update both firmware and ReINX?

Draxzelex · Dec 13, 2018

dss862 said:
REMOVED

It is stricly against the forum rules to link copyrighted content here. Refer to the first post of the ChoiDujourNX thread for hints on where to obtain the firmware files.

spedzilla said:
so if we already have ReiNX installed on 6.0.0 are we able to upgrade to 6.2.0 using ChoiDujourNX and then use ReiNX toolkit to update it to 2.0 or should i update ReiNX first before updating firmware? little confused on what steps to take to update both firmware and ReINX?

The toolkit won't give you the build with 6.2 support. You will have to go to the ReiSwitched Discord Server for a link to a build that has 6.2 support.

spedzilla · Dec 13, 2018

is there a guide on how to update ReiNX from the .zip is it a matter of just replacing the .bin files and folders already on the SD card? i assume there is more to it then that

i have a R4S dongle, first time i installed ReiNX was on a clean install of 6.0.0, and haven't been online with it since and i still have the backup NAND, would i be better off restoring the NAND updating officially then doing a fresh install of ReiNX 2.0? would that require reinstalling all my .nsp files again that are already installed on sd card? i dont actually have anything saved to system memory.

regnad · Dec 14, 2018

spedzilla said:
is there a guide on how to update ReiNX from the .zip is it a matter of just replacing the .bin files and folders already on the SD card? i assume there is more to it then that

i have a R4S dongle, first time i installed ReiNX was on a clean install of 6.0.0, and haven't been online with it since and i still have the backup NAND, would i be better off restoring the NAND updating officially then doing a fresh install of ReiNX 2.0? would that require reinstalling all my .nsp files again that are already installed on sd card? i dont actually have anything saved to system memory.

It’s easier than you think. Completely replace the ReiNX folder on your SD and replace the bin on your SD. Copy the titles folder from your old ReiNX folder and put it in the new one. Then reflash your dongle to inject the new bin.

--------------------- MERGED ---------------------------

Kohmei said:
Not sure if this is related, but since updating to 6.2 and the 6.2 compatible ReiNX, I need to inject the payload twice now to get into the system. First time I was afraid I bricked it, but then I did it again and I was in. Shutdown the unit a few times now and now I have to do it twice every time.

I'm using TegraRCMSmash

FWIW I’m using the new 6.2 ReiNX build on a Switch that I haven’t updated yet, still on 6.1, and I have the same problem. So it seems the problem isn’t 6.2, but something with the new ReiNX build.

spedzilla · Dec 14, 2018

regnad said:
It’s easier than you think. Completely replace the ReiNX folder on your SD and replace the bin on your SD. Copy the titles folder from your old ReiNX folder and put it in the new one. Then reflash your dongle to inject the new bin.

yeah was alot easier then i thought i just override the reinx.bin and reinx folder on sd card, plugged dongle in and didn't have to do anything different to normal startup from power off. updated to 6.2 using ChoiDujourNX and rebooted and everything looks fine system settings show on 6.2 using reiNX, is there anywhere to view if it is running latest reinx i assume it is or it wouldnt be working on 6.2 firmware.

haven't had any problems with having to inject twice or anything of that nature. i assume thats because i am using dongle and not tegrarcm

orangpelupa · Dec 14, 2018

Weird the new update for 6.2 Sttill not on github despite its already floating on discord

regnad · Dec 15, 2018

spedzilla said:
yeah was alot easier then i thought i just override the reinx.bin and reinx folder on sd card, plugged dongle in and didn't have to do anything different to normal startup from power off. updated to 6.2 using ChoiDujourNX and rebooted and everything looks fine system settings show on 6.2 using reiNX, is there anywhere to view if it is running latest reinx i assume it is or it wouldnt be working on 6.2 firmware.

haven't had any problems with having to inject twice or anything of that nature. i assume thats because i am using dongle and not tegrarcm

I use a dongle too.

Mike83 · Dec 15, 2018

Having an odd problem. Hadn't played around with my switch for a bit, just put the latest version of ReiNX available from github, (17.1.1) and when I boot up my switch, I get the ReiNX bootscreen, but then clicking albums just brings up my albums folder full of screenshots. I've tried using the shoulder buttons while opening albums too and get the same results?

EDIT: Using RajNX lets me hold down R and start albums to get to hbmenu.nro to start like it should.

Deleted User · Dec 15, 2018

Mike83 said:
Having an odd problem. Hadn't played around with my switch for a bit, just put the latest version of ReiNX available from github, (17.1.1) and when I boot up my switch, I get the ReiNX bootscreen, but then clicking albums just brings up my albums folder full of screenshots. I've tried using the shoulder buttons while opening albums too and get the same results?

EDIT: Using RajNX lets me hold down R and start albums to get to hbmenu.nro to start like it should.

Assuming you're on 6.2, you need to go to discord and download the latest version, as github doesn't have the latest files for some reason.

Mike83 · Dec 15, 2018

I'm on 6.0.0.

Put the latest ReiNX files on my SD card and it's still the same

Deleted User · Dec 15, 2018

Mike83 said:
I'm on 6.0.0.

Redownload the files and make sure you have the latest payload too.

Mike83 · Dec 15, 2018

StarGazerTom said:
Redownload the files and make sure you have the latest payload too.

Done. Still the same. NSP files I've downloaded and installed in the past are still working too, so I know the CFW is working, it just won't let me into the hbmenu via albums on ReiNX.

Deleted User · Dec 15, 2018

Thats really weird. Im on sxos now for emunand, but was the hbloader nro moved to a new location? i vagely remember that being discussed.

Hacking RELEASE [Official] ReiNX thread [DEAD]

Member

a9lh-1user

Guest

"Joker"

a9lh-1user

Guest

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Member

Button Masher

Member

Well-Known Member

Button Masher

Well-Known Member

Deleted User

Guest

Well-Known Member

Deleted User

Guest

Well-Known Member

Deleted User

Guest

Similar threads

Popular threads in this forum