Yeah, I was wondering till I seen the editFenrirWolf said:region.bin goes in USB:\sneek while font.bin goes on the SD root.
EDIT: This is for SNEEK-DI. UNEEK needs neither file.
Yeah, I was wondering till I seen the editFenrirWolf said:region.bin goes in USB:\sneek while font.bin goes on the SD root.
EDIT: This is for SNEEK-DI. UNEEK needs neither file.
Assuming your going to update with online-ninty 4.2 it would wipe out HBC and that's not good.drmarvin said:Could it be because I'm using the wrong boot2 or something? I think I'm using the boot2_usb. I have everything I can try from the USB drive, but I'm grasping at straws here.
Should I use a virgin 3.2U, then make sure IOS61 is installed, then install HBC, then upgrade to 4.2U?
I don't know if that would be better.
Thanks for all the input.
ChokeD said:Assuming your going to update with online-ninty 4.2 it would wipe out HBC and that's not good.drmarvin said:Could it be because I'm using the wrong boot2 or something? I think Should I use a virgin 3.2U, then make sure IOS61 is installed, then install HBC, then upgrade to 4.2U?
I don't know if that would be better.
Thanks for all the input.
Edit: I would think update first, then re-install a IOS61, then HBC with showmiiwads. But I'm not sure so....
hmm, I must have had the old and not known it then cause when I updated it wiped mine out. Nice to know man thanks.fogbank said:ChokeD said:Assuming your going to update with online-ninty 4.2 it would wipe out HBC and that's not good.drmarvin said:Could it be because I'm using the wrong boot2 or something? I think Should I use a virgin 3.2U, then make sure IOS61 is installed, then install HBC, then upgrade to 4.2U?
I don't know if that would be better.
Thanks for all the input.
Edit: I would think update first, then re-install a IOS61, then HBC with showmiiwads. But I'm not sure so....
The 4.2 update does not wipe out the newest (JODI) HBC.
Try here you might find some answers.xyourmomx said:I can get it working from SD just fine. But when I copy the folders to USB (which is active and primary) and use the usb boot2 instead. I get no video signal or anything. Any ideas?
It's the newest revision of SNEEK. I'm making sure boot2_usb.bin is renamed to boot2.bin and on both the USB and SD card.
No flash of the drive, it just turns on and then no video signal, no wiimote sync. Whereas the boot2_sd.bin with the files on the SD work just fine. I'd like to use this as a replacement for triiforce.
QUOTE said:GC Game File and Folder Structure
Use GC-Tool to extract GC games.
"AppLoader.ldr" -> apploader.img
"Game.toc" -> fst.bin
"ISO.hdr" -> this file seems to be boot.bin with bi2.bin you have to devide it. first 0x440 bytes boot.bin, then the next 0x2000 bytes for the bi2.bin
"Start.dol" -> main.dol
arasium said:Hi everybody.
I haven't any pb compiling sneek (either uneek or sneek+DI). But, if i want to create a virgin nand, i can't continue.
I mean, i see a white screen "Press A to continue", but i can't resync my wiimotes (i use the red buttons), so i can't press A
Is someone has an idea? Do i need to put some files from my nand dump in order to don't resync my wiimotes?
They show up but no, GC will not launch just yet.The-Lion said:QUOTE said:GC Game File and Folder Structure
Use GC-Tool to extract GC games.
"AppLoader.ldr" -> apploader.img
"Game.toc" -> fst.bin
"ISO.hdr" -> this file seems to be boot.bin with bi2.bin you have to devide it. first 0x440 bytes boot.bin, then the next 0x2000 bytes for the bi2.bin
"Start.dol" -> main.dol
So is it already possible to launch GC games from USB?
The menu dealy works in 4.2u now, so I'd just forget about region changing the nand.NiKKrO said:Hi,
i've a problem with a 3.2U Nand on a 4.2E Wii. I made a virgin 3.2U nand with showmiiwads. I've decrypted my setting.txt and re-encrypted.
Changeg from
CODEAREA=EUR
MODEL=RVL-001(EUR)
DVD=0
MPCH=0x7FFE
CODE=LEH
SERNO=XXXXXXXXX
VIDEO=PAL
GAME=EU
to
CODEAREA=USA
MODEL=RVL-001(USA)
DVD=0
MPCH=0x7FFE
CODE=LU
SERNO=XXXXXXXXX
VIDEO=NTSC
GAME=US
To make a good 3.2U virgin nand, i've installed NTSC version of hidden channel EULA and region changer, Sysmenu v289 and ios30v1440.
The first boot is ok, i can set all parameters and i've also tried to update (it work). But when i power off and try to reboot the ntsc nand, i get only black screen. I don't understand why i can boot the nand just one time. I have the problem with sneek and uneek r78 and r85 (yesterday i tried to re-compile sneek but no change). With a 4.2E nand, sneek works perfectly
and why go back to a 3.2U instead of a 4.2U you could have.FenrirWolf said:The menu dealy works in 4.2u now, so I'd just forget about region changing the nand.NiKKrO said:Hi,
With a 4.2E nand, sneek works perfectly