Do you mean restoring from backup? I made backup right after install rp2040. Already restored that, but didn't helps.probably need boot0 boot1 restore files from your own tablet.
Do you mean restoring from backup? I made backup right after install rp2040. Already restored that, but didn't helps.probably need boot0 boot1 restore files from your own tablet.
u probably need have a backup before install picoDo you mean restoring from backup? I made backup right after install rp2040. Already restored that, but didn't helps.
Sorry they have the number 470 which means 47X10^0 ohms, meaning, 47 ohms.You got all that right but the resistors - They are 47Ohm not 470 and not 470k
Important post link at top of thread pageHow the mosfet install in switch lite ??? Can some one tell me the page of this???
Yes, he said 470K in question.Sorry they have the number 470 which means 47X10^0 ohms, meaning, 47 ohms.
Post automatically merged:
Important post link at top of thread page
It should be red after flash uf2. If yours is Green, that means you should bridge pad which indicates RGB/GRB modeWhat led color you guys got after uf2 file flash? Mine is green. I remember @rehius mentioned RGB Mode or something
www.digikey.com/en/products/detail/vishay-dale/CRCW060347R0FKEAC/7924025 0603
www.digikey.com/en/products/detail/vishay-dale/CRCW080547R0FKEAC/7922299 0805
I ordered 2 diff sizes to see what I like better
We need one guide with all this info and what pin to solder on cpu flex for all versions so the same questions don't keep getting asked and so it helps everyone out. I know there is an AIO thread just started but its still needs more info.
Time to look for alt point!They acutally secretly uploaded OLED scan but very slow loading time for each layer.
https://balika011.hu/switch/oled/
Does the pico usb c not need cc pin aswell I say this as if i use a standard usb 1.1 micro USB cable to usbc windows wont detect itohmygod. my brain will explode. can you provide me a link .thank you so much !
What is the clear adhesive you're using for strain relief there?
it's no so clear, es greenish, is PCB UV glue, It's a gel you apply using something like a toothpick and then with a UV lamp you cure it and solidify.What is the clear adhesive you're using for strain relief there?
Thanks! I'll order some, that sounds great.it's no so clear, es greenish, is PCB UV glue, It's a gel you apply using something like a toothpick and then with a UV lamp you cure it and solidify.
It's called solder mask and comes in various colors. I like to use it for hdmi and usbc port trace restoration. I like to buy in big batches and its cheap.it's no so clear, es greenish, is PCB UV glue, It's a gel you apply using something like a toothpick and then with a UV lamp you cure it and solidify.
I really don't know, I use a cheap UV flashlight and works fine, some people even uses sun light.Thanks! I'll order some, that sounds great.
It looks like I may need new UV lamps too. I have 254nm and 222nm. This seems to need 365nm.
I'm not sure what wavelength my UV eraser for EPROMs is. Would that work?
Time to investigate after dinnerTime to look for alt point!
Is there a way to use boot0/boot1 from another oled?u probably need have a backup before install pico
are they both correct?
View attachment 357511
Some body please tell me that value of component
maybe i get Short and now i check that all component is connected from 2 sides of the capacitor TT
View attachment 360525