Hacking n3ds an error has occured on boot after powering it off on 2.1

[mrissaoussama]

I was on 2.1 and I was trying to install a9lh. The browser froze so I closed the n3ds (not the lid) and when I opened it I got an error has occurred. I can't launch luma either. Please help me

 

[aerios169]

I was on 2.1 and I was trying to install a9lh. The browser froze so I closed the n3ds (not the lid) and when I opened it I got an error has occurred. I can't launch luma either. Please help me

you had not to close the n3ds it caused a brick , you had to only turn off the 3ds

 

[mrissaoussama]

you had not to close the n3ds it caused a brick , you had to only turn off the 3ds

I powered off the 3ds not closed it. I read the guide carefully

 

[aerios169]

Uhhmm do you have all of the necesary archives on your memory ?

 

[einhuman197]

Does it start without sd? If yes than start the system without sd and when you are in home menu, push it in.

 

[mrissaoussama]

Uhhmm do you have all of the necesary archives on your memory ?

Everything is there

Does it start without sd? If yes than start the system without sd and when you are in home menu, push it in.

Ithe doesn't matter whether the SD card is in there or not

 

[einhuman197]

Congrats you're bricked. You'll need a hardmod to restore your nand backup.

 

[mrissaoussama]

Congrats you're bricked. You'll need a hardmod to restore your nand backup.

And why exactly did I brick?

 

[The Catboy]

Does the error occur when you boot the system on?

 

[mrissaoussama]

Does the error occur when you boot the system on?

Yes. after pressing the power button

 

[MeAndHax]

Yes. after pressing the power button

Have fun hardmodding your system

I guess you had an unsuccessful ctr transfer

 

[jupitersj]

Did you hit select after the browser load/freeze? otp.bin from your console?

Have you tried clearing the home menu exdata on sdcard? (probably doesn't matter since you can't boot even with sdcard removed)

Tried booting with the catridge slot empty?

Tried deleting Luma config.bin, are you on 6.6? (probably doesn't matter, no boot without sd card)

Is the error
An error has occurred: failed to mount CTRNAND?

if so, you can still do a 9.2 ctr transfer or install nand backup if you can get Luma payloads working, recheck they are correct.
Check sd card for errors on your pc.

If not, sounds like your 2.1 ctrtransfer went bad. Bad otp for a9lh, or bad sdcard causing this corrupted transfer.

 

[mrissaoussama]

Did you hit select after the browser load/freeze? otp.bin from your console?

Have you tried clearing the home menu exdata on sdcard? (probably doesn't matter since you can't boot even with sdcard removed)

Tried booting with the catridge slot empty?

Tried deleting Luma config.bin, are you on 6.6? (probably doesn't matter, no boot without sd card)

Is the error
An error has occurred: failed to mount CTRNAND?

if so, you can still do a 9.2 ctr transfer or install nand backup if you can get Luma payloads working, recheck they are correct.
Check sd card for errors on your pc.

If not, sounds like your 2.1 ctrtransfer went bad. Bad otp for a9lh, or bad sdcard causing this corrupted transfer.

No I get an official error.
I tried pressing the select the first time the browser froze. I waited 10 seconds then I rebooted successfully without a9th. When I tried again I got the error