Hacking [Release] rxTools - Roxas75 3DS Toolkit [fw 2.0 - 9.2]

[Zidapi]

-10E should be exploitable , its the 4.X browser (and I can launch gateway via it). just seems like the exploit chain for rxtools is missing.

Edit - Yup. I rolled back to 2.6 and it's exploit chain works , so I can update the browser and then swap back.

Glad you got it sorted, I just realised I missed the part about you having a Gateway.

Gateway added support for booting sysNAND a little while ago, so for future reference;

From their release notes:

– Added option to boot into SYSNAND mode directly even with EMUNAND on SD card
We received plenty of feedback regarding our previous firmware release and we heard you!

In our last release we realised there was no easy way to boot into SYSNAND mode, so we got you covered now!
From now on, while in the Gateway menu with the boot icons visible, simply hold B while booting into Gateway mode or Classic mode!
You will then be asked to confirm booting into SYSNAND mode by pressing X.

 

[ironmaster49]

HOLY CRAP I WENT ON RXMODE AND UPDATED IN EMUNAND AND NOW MY SYSNAND IS 9.9!!! NOOOOOO LATEST RXTOOLS NIGHTLY

--------------------- MERGED ---------------------------

I have a NAND.bin backup dont worry its my fault i went on it and it said rx-s firmware version i was being stupid and did it i forgot it got updated well i got to open my 3ds and solder it now to raspberry pi to do it

--------------------- MERGED ---------------------------

yargh i feel so annoyed how can i downgrade i have a 7.1 nand.bin and a raspberry pi

 

[capito27]

HOLY CRAP I WENT ON RXMODE AND UPDATED IN EMUNAND AND NOW MY SYSNAND IS 9.9!!! NOOOOOO LATEST RXTOOLS NIGHTLY

did you made sure you were in RX-E in system menu ? if it was RX-S, it meant it was sysnand.
anyway, i hope you have a nand backup and can make/have someone make you a nand mod.

 

[nastys]

HOLY CRAP I WENT ON RXMODE AND UPDATED IN EMUNAND AND NOW MY SYSNAND IS 9.9!!! NOOOOOO LATEST RXTOOLS NIGHTLY

--------------------- MERGED ---------------------------

I have a NAND.bin backup dont worry its my fault i went on it and it said rx-s firmware version i was being stupid and did it i forgot it got updated well i got to open my 3ds and solder it now to raspberry pi to do it

--------------------- MERGED ---------------------------

yargh i feel so annoyed how can i downgrade i have a nand.bin and a raspberry pi

You don't need a RPI, just a hard mod.

 

[ironmaster49]

How do i do a hardmod? How can i reverse it? Is there a big risk in doing it? I opened a psp before and i broke it by accident do i need solder to do it i ran out of solder

 

[nastys]

How do i do a hardmod? How can i reverse it? Is there a big risk in doing it? I opened a psp before and i broke it by accident do i need solder to do it i ran out of solder

Old 3DS, Old 3DS XL, New 3DS or New 3DS XL?

 

[Elaugaufein]

That's good to know, thanks. I thought I remembered something like that about Gateway but couldn't remember how to do it.

 

[ironmaster49]

Oh its a old 3ds regular european and i have a raspberry pi at hand but i have no solder and i have an original 7.1 NAND backup

 

[nastys]

Oh its a old 3ds european and i have a raspberry pi at hand but i have no solder and i have an original 7.1 NAND backup

Well, either get some solder and do it yourself (cheaper solution) or pay someone to do it.

 

[ironmaster49]

Ok then but i can do it without solder with tape and some wire? I just want enough just to flash back my firmware 7.1 nand.bin, not a permanent hard mod

 

[bache]

Ok then but i can do it without solder with tape and some wire? I just want enough just to flash back my firmware 7.1 nand.bin, not a permanent hard mod

God no, do it properly.

 

[ironmaster49]

hah, ill just get some solder then and try it...

 

[Elaugaufein]

Hmmm. I can't launch Emunand on the latest nightly from 9.2.0-10E (but with the 20E browser installed). Interesting. I can launch sysnand with patches and Gateway / 2.6 can launch the Emunand. Any ideas ? I'm on an o3DS.

I could launch Emunand on the latest nightly when I launched from 4.5 before I updated though. (I think? Maybe I'm misremembering, after the crazy with almost being unable to launch rxtools I might be off).

 

[Cavioe]

Ok then but i can do it without solder with tape and some wire? I just want enough just to flash back my firmware 7.1 nand.bin, not a permanent hard mod

Sorry to hear it updated sysnand. Always not a good read to hear that. But maybe the devs might consider changing the sysnand back to stock to "Ver". And leave the RX to only Emunand?

But your comment on tape made my night and can sleep well now from stress at work.

 

[ironmaster49]

Sorry really off topic but where can i find a hard mod tutorial? Yeah that change is the reason why i updated my sysnand i wasnt careful about the s i just assumed it was emunand when i read rx i didnt know it was changed back. BTW dont worry about tape i will use solder ill buy some tommorow

 

[Cavioe]

http://3dbrew.org/wiki/Hardware

I was browsing that side above when looking into what a hardmod entails. But may I recommend that if you do not feel comfortable doing it to just pay someone like those recommended. I know it is extra costs but to me its well worth it. Especially after reading those who mess up and can't recover after since they messed up bad.

 

[ironmaster49]

http://www.ozmodchips.com/3ds-xl-downgrade-flashing-service-australia-p-532.html this service for 28 usd or 40 aud i found it not sure if they do it for original 3ds but maybe they do. But will it be easier to use a raspberry pi to flash back nand.bin? Thanks btw this service is in Australia for aussies wanting to do this

 

[nastys]

Sorry really off topic but where can i find a hard mod tutorial? Yeah that change is the reason why i updated my sysnand i wasnt careful about the s i just assumed it was emunand when i read rx i didnt know it was changed back. BTW dont worry about tape i will use solder ill buy some tommorow

http://gbatemp.net/threads/nand-flash-dump-3ds.353263/

 

[ironmaster49]

So is this for just blue screen brick and not updated unhackable 3ds? I don't want to mod a sd reader btw ill rather use a raspberry pi and i just want to restore my old 7.1 nand.bin thanks for your help. Or is it time to get a new nintendo 3ds and sell my old 3ds?

 

[ironmaster49]

Excuse me but is the process for downgrading a 3ds the same as fixing a blue screen of death bricked 3ds? Are the tutorials for bsod fix working for purposes of downgrading console? Thanks
I also read you need to remove the cartridge slot to access the pinouts on an original model, is this true?