Wii #0330 - Super Mario Galaxy (USA)

[katsuce]

update done, I now have this message "update complete. reboot galaxy"

wtf does that mean? I'll have to pop up the wiikey 1.9g and do the update every time I'll want to play U R MR GAY?

do I get ir rite or what?


thanks fellas

C'est une vanne de l'équipe Wiikey, car ils savent très bien que si tu fais cet mise a jour, c'est pour galaxy

ok merci

j'aurai donc pas besoin de relancer le dvd à chaque fois, sympa

translation for the non-french speaking people here:

ok thanks

I won't have to boot the setup disc every single time, nice

 

[maniza]

i get these error : test failed
check your conections and try again!

any idea how to fix these


Before you hit A to test, eject the cd. Then it will test to 100%. Put cd back in. Then eject it again before hitting A to update.



this doesn't work, i already tried this but still gives me the error 001 when i put smg.

"Initializing drive....
Reading firmware data...done.
Stopping drive...

EJECT CD HERE

"Press A or reset to test flashing
TESTING.. please wait...
Success! Press any key"

PUT CD BACK IN HERE.
THEN PRESS A

"Initializing drive....
Reading firmware data...done.
Stopping drive...

EJECT THE CD HERE
PRESS A

"Press A or reset to run update
Updating.. please wait...


You should hear Homer simpson say something if the flash worked.

This was exactly what i did, i hear the homer voice too but when i put smg didn't work....

but thanks for the help.

what program did you used to burn the iso? and exactly where is the game not working? the update, after that or do you get the 001 error?

 

[phrostminor]

what program did you used to burn the iso? and exactly where is the game not working? the update, after that or do you get the 001 error?

I burned using Disk Image utility in OS X, which I use for all Wii .iso. The game shows up, and when I go to play, after updating to 1.9g. it still gives me error #001.

wiikey 1.9g
3.1u

 

[maniza]

well im not that far yet i heard that burning the image whit imgburn didnt work but im not shure

 

[martsmall]

well im not that far yet i heard that burning the image whit imgburn didnt work but im not shure

i used imgburn & it worked fine

 

[darksushi]

i get these error : test failed
check your conections and try again!

any idea how to fix these

Before you hit A to test, eject the cd. Then it will test to 100%. Put cd back in. Then eject it again before hitting A to update.

this doesn't work, i already tried this but still gives me the error 001 when i put smg.

"Initializing drive....
Reading firmware data...done.
Stopping drive...

EJECT CD HERE

"Press A or reset to test flashing
TESTING.. please wait...
Success! Press any key"

PUT CD BACK IN HERE.
THEN PRESS A

"Initializing drive....
Reading firmware data...done.
Stopping drive...

EJECT THE CD HERE
PRESS A

"Press A or reset to run update
Updating.. please wait...


You should hear Homer simpson say something if the flash worked.

This was exactly what i did, i hear the homer voice too but when i put smg didn't work....

but thanks for the help.

what program did you used to burn the iso? and exactly where is the game not working? the update, after that or do you get the 001 error?

Burn with ImgBurn, the game do the update but after that appear the 001 error.

 

[stok3d]

wiikey with ntsc wii..updated wiiley, restarted, and smg runs...but it freezes half-way through the opening sequence, the part where the camera does a close-up of peaches eyes, and says 'game dsic could not be read'. i've used the same media for all my games without a hitch too

 

[Epak]

Can anyone tell me if there's anything wrong with what I'm about to do?

1. I have a PAL wii 3.0E (cannot update, no wifi right now)

2. I just updated wiikey with 1.9g (properly)

3. Currently downloading SMG - will extract iso, brickblock it, burn with Nero


Should work? Anything worth mentioning?

Thanks!

That would be solved if there were any Pal games that included the 3.1E update. I think I just have to wait for the Pal release...

 

[omgwtfbbqq]

Hey guys! When u say stop at "10-15%"... does it say in percentage how much it has updated or is it just a bar and i have to decide on my own when it is approximately at 10-15% ?

 

[blacksoul]

i get these error : test failed
check your conections and try again!

any idea how to fix these

Before you hit A to test, eject the cd. Then it will test to 100%. Put cd back in. Then eject it again before hitting A to update.

this doesn't work, i already tried this but still gives me the error 001 when i put smg.

"Initializing drive....
Reading firmware data...done.
Stopping drive...

EJECT CD HERE

"Press A or reset to test flashing
TESTING.. please wait...
Success! Press any key"

PUT CD BACK IN HERE.
THEN PRESS A

"Initializing drive....
Reading firmware data...done.
Stopping drive...

EJECT THE CD HERE
PRESS A

"Press A or reset to run update
Updating.. please wait...


You should hear Homer simpson say something if the flash worked.

This was exactly what i did, i hear the homer voice too but when i put smg didn't work....

but thanks for the help.

what program did you used to burn the iso? and exactly where is the game not working? the update, after that or do you get the 001 error?

Burn with ImgBurn, the game do the update but after that appear the 001 error.

All these advices are useless, if the update test doesn't work, the update isn't effective even if you'll do that (stupid) trick (remove the dvd when it test and update). The only solution is to check your solder point or change your wiikey.

 

[phrostminor]

@blacksoul:

I have a spare WiiKey, should I try another chip and see if its my points/chip? So it SHOULD update without taking the cd out?

 

[Grenader]

So for those that never updated our Wiikeys, can we update using this patch or do we need to update to the second firmware first?

 

[Kakyoin]

So for those that never updated our Wiikeys, can we update using this patch or do we need to update to the second firmware first?

You can update straight to 1.9g

 

[omgwtfbbqq]

Hey guys! When u say stop at "10-15%"... does it say in percentage how much it has updated or is it just a bar and i have to decide on my own when it is approximately at 10-15% ?

 

[X-Tractor]

Will SMG work if you use Both RegionFrii and WiiBrickBlocker? (With updated Wiinja Deluxe).
Or, does it only work without using RegionFrii?

 

[Mr Q]

I have a bit of a problem!

I´ve downloaded the new update and i´ve burnt out the pal iso on a DVD-R on ImageBurn.

But the problem is:

When i insert the DVD, the Wii starts "hacking" and make unusual noises. Then, a blac screen comes up and says;

An error has occured....
Please reset blabla....

My Wii runs on version 3.0E and it has the real WiiKey modchip.
What am i doing wrong, I´d apreciate som help!

 

[ajbrinham]

This should work for anyone on pal 3.0e....make wiikey update says reset galaxy after its done

1) Download the game.
2) Patch the game with RegionFrii and burn it.
3) Launch the game and run the update. Unplug the Wii at about 10-15%.
4) Repatch the game (who is already patched with RegionFrii) with Brickblocker and burn it again.
5) Launch the game patched with RegionFrii and Brickblocker and play !


Theres no reason why it wouldn't work if you do this

 

[Mr Q]

Oh, sorry if i didn´t make myself clear, but i thought you understood that i was talking about the new WIIKEY UPDATE that came out not too long ago (today if i remember right).

I´ve already got the game, and i´ve updated 10-15%, and i get the error 001 when i play.

My question is: WHY WONT MY WII READ THE UPDATE DISC?

 

[Epak]

This should work for anyone on pal 3.0e....make wiikey update says reset galaxy after its done

1) Download the game.
2) Patch the game with RegionFrii and burn it.
3) Launch the game and run the update. Unplug the Wii at about 10-15%.
4) Repatch the game (who is already patched with RegionFrii) with Brickblocker and burn it again.
5) Launch the game patched with RegionFrii and Brickblocker and play !


Theres no reason why it wouldn't work if you do this

Are you sure? Don't wanna semi brick my Wii. With Metroid 3 it worked, cause there were no firmware updates, but SMG has one.

 

[phoenix4]

I have a WiiD modchip. Am i now really the only one who can't play SMG or is the chip a Wiikey clone where i can use the update on?