Hacking USB Loader GX doesn't see any games, Wiiflow (and lite) freeze or reboot on load

[Cyan]

maybe the usb bus is dead? I don't remember if I asked you to try other homebrew (wiixplorer, wiimc, etc. but they use IOS58)
but I think it can detect, mount and list files, right? so it's not a usb problem. If the problem is only when launching a game it's more likely an IOS issue.
did you try to reinstall d2x cIOS v8 final ? or d2x r52 (not r53). v10 has an additional fix for hdd detection compared to v8, maybe it can help in your case.

 

[urg]

You must have done something wrong then with the first Wii if you cannot use the USB.

If you're going to keep being contrary, please read the thread.

 

[CalvinHsieh]

I got the same issue like "urg" and the wii usb loader cannot work. My will is 3.2U which purchased in the US also.
Below is my syscheck and hope someone can help for it.
Here is my SysCheck:

Spoiler

sysCheck v2.1.0b19 by Double_A and R2-D2199 Nano

...runs on IOS58 (rev 6175).



Region: NTSC-U

System Menu 3.2U (v289)



Drive date: 2006.09.07

Homebrew Channel 1.1.0 running on IOS36

HomebrewFilter ist nicht installiert

Hollywood v0x11

Console ID: 38311912

Boot2 v2

Found 131 titles.

Found 28 IOS on this console. 1 of them are stub.



IOS4 (rev 3): Stub

IOS9 (rev 516): Flash Access

IOS11 (rev 10): Trucha Bug ES Identify Flash Access NAND Access

IOS12 (rev 6): Trucha Bug ES Identify Flash Access NAND Access

IOS13 (rev 10): Trucha Bug ES Identify Flash Access NAND Access

IOS14 (rev 257): Trucha Bug ES Identify Flash Access NAND Access

IOS15 (rev 257): Trucha Bug ES Identify Flash Access NAND Access

IOS17 (rev 512): Trucha Bug ES Identify Flash Access NAND Access

IOS20 (rev 12): Trucha Bug ES Identify Flash Access NAND Access

IOS21 (rev 514): Trucha Bug ES Identify Flash Access NAND Access

IOS22 (rev 772): Trucha Bug ES Identify Flash Access NAND Access

IOS28 (rev 1288): Trucha Bug ES Identify Flash Access NAND Access

IOS30 (rev 1040): Trucha Bug ES Identify Flash Access NAND Access

IOS31 (rev 1040): Trucha Bug ES Identify Flash Access NAND Access

IOS33 (rev 1040): Trucha Bug ES Identify Flash Access NAND Access

IOS34 (rev 1039): Trucha Bug ES Identify Flash Access NAND Access

IOS35 (rev 1040): Trucha Bug ES Identify Flash Access NAND Access

IOS36 (rev 1042): Trucha Bug ES Identify Flash Access NAND Access

IOS37 (rev 2070): Trucha Bug

IOS38 (rev 3609): Trucha Bug

IOS50 (rev 4889): Trucha Bug

IOS53 (rev 4113): Trucha Bug

IOS55 (rev 4633): Trucha Bug

IOS58 (rev 6175): USB 2.0

IOS60 (rev 6174): Trucha Bug

IOS249[56] (rev 21009 Info: d2x-v9beta(r49)): Trucha Bug NAND Access USB 2.0

IOS250[57] (rev 21009 Info: d2x-v9beta(r49)): Trucha Bug NAND Access USB 2.0

IOS254 (rev 65281): BootMii

BC v2

MIOS v5



Report generated on 2019/02/20.

 

[Cyan]

"same as urg" what?
please be more specific what is your issue, previous users always have lot of issues.
you don't see game, it freeze, it reboots, or all the three at the same time? if you "can't see game" it's actually not possible to launch it so it can't possibly freeze or reboot either.


Also, your setup is outdated.
you are using d2x v9 (beta)
you can either downgrade to d2x v8, or update to d2x v10 r52
do not update to d2x v10 r53 (which is identical to v9 beta)

 

[CalvinHsieh]

"same as urg" what?
please be more specific what is your issue, previous users always have lot of issues.
you don't see game, it freeze, it reboots, or all the three at the same time? if you "can't see game" it's actually not possible to launch it so it can't possibly freeze or reboot either.

Also, your setup is outdated.
you are using d2x v9 (beta)
you can either downgrade to d2x v8, or update to d2x v10 r52
do not update to d2x v10 r53 (which is identical to v9 beta)

I got the same problem which I cannot use either one of the USB loader to read games from external USB2.0 enclosure.

With USB Loader GX, setup Loader IOS to 58 and Game IOS to 249 can see the games in drive but can not start(always back to homebrew after start the game title)
For the other two usb loader(Wiiflow and CFG), cannot read the game from USB drive.

I have mix tried v8 v9 v10_r53/r53 with and cIOS249/56/57 or cIOS250/56/57 even cIOS251/58 or cIOS249/58.
But no luck at all with the cIOS above.

Now I find one solution from another thread somewhere, using only one SDHC card.
I use the FAT32 SDHC 16GB memory with game and apps in it.
Install IOS58/6176 and cIOS249/57 only.
It works with CFG(but I have to change the FS to SDHC after USB detection failed everytime). Games work with no problem.
The other two loader which USB loader GX seems does not support SDHC with Game and Wiiflow is very slow to start the game although it works with SDHC too.

I have to admit that I am defeat too because I have tried 3 different USB enclosure and no luck.
Still waiting for any possible solution.

 

[Cyan]

which enclosure are you using?
if it's assimilated to HUB, it will not work.
don't you have any real external HDD?

get a Western Digital "Element", or "my passport".

 

[CalvinHsieh]

which enclosure are you using?
if it's assimilated to HUB, it will not work.
don't you have any real external HDD?

get a Western Digital "Element", or "my passport".

I have three different enclosures, none is from the vendor original like WD Seagate.

Since it is work ok with my 64GB SDXC card now.

I will stay with the SDXC card and CFG loader now.

Thanks a lot for your help. I will try WD original external HDD if I can borrow one from my friend.