Tutorial
Updated
ultimate rcm solution if no jig (requires a sim card tray removal)
this process works 100 percent of the time
it requires a normal sim card tray removal tool
Instructions:
-Insert circular side in the switch rail (Edit: you want the circular part to rest on the rail below the switch's pins so that it does not short all pins)
-let the pointy side of the tool point and hang outwards
-push on the pointy side gently towards outside so that the sides of the tool bridge the pins
-hold "volume+" button while holding tool gently over nintendo switch rail pins
-and while holding "volume+" press power
P.S. pin 10 is on the right side of the rail so you want to position the tool so that its over 10 pin.
the magic arc of the pin helps so that only the other needed pins are bridged.
it requires a normal sim card tray removal tool
Instructions:
-Insert circular side in the switch rail (Edit: you want the circular part to rest on the rail below the switch's pins so that it does not short all pins)
-let the pointy side of the tool point and hang outwards
-push on the pointy side gently towards outside so that the sides of the tool bridge the pins
-hold "volume+" button while holding tool gently over nintendo switch rail pins
-and while holding "volume+" press power
P.S. pin 10 is on the right side of the rail so you want to position the tool so that its over 10 pin.
the magic arc of the pin helps so that only the other needed pins are bridged.
Last edited by Don Jon,