Hacking Sx Core and Sx Lite , test Units Received

N

Nohman90

Member
Newcomer
Level 2
Joined
Jun 12, 2020
Messages
14
Trophies
0
Age
33
XP
168
Country
Netherlands

Attachments

  • 8846BF7A-4A07-4B40-A7D5-D326E8077FB9.jpeg
    8846BF7A-4A07-4B40-A7D5-D326E8077FB9.jpeg
    929.7 KB · Views: 182
  • Like
Reactions: JethronicS and Leverlock
Modificatorul

Modificatorul

Well-Known Member
Member
Level 10
Joined
Oct 28, 2009
Messages
268
Trophies
1
XP
2,306
Country
Antarctica
bodgy said:
I'm an emotional wreck right now. What a fucking roller-coaster.

I nailed the initial install, nice clean joints... Booting fine. I'm a legend, celebrate with a couple of drinks. Time to reassemble.

Then I realised that the anchor points go BELOW the frame. Fuck. Had a decent solder bead on them and there was no way the shield was going on the way I had it installed.

I had some options, cut the shield to clear the solder beads, cut off the anchor points all together or try and flow the solder down to clear it. I chose the third option. Bad idea. Flashing blue... Waiting... Never goes green.

I put too much heat into it and SP2 had let go. Arctic MX5 is everywhere. My only option was to desolder and try again.

Clean the shit out of everything. I went way too hard on the thermal paste first time. It's a fucking mess. Can't even see the capacitor, I'm assuming I ripped it off.

Suddenly through the mess I see the cap! It's still attached. It's time to fire up the iron again.

I try a couple of warm up joints on the poor DDR3 ram I have been abusing as a test bed. I'm on fucking fire. Best work I have been doing yet. I decide that scotch whisky is like steroids for soldering. I'm rock solid.

I go in hard, confident with no hesitation. I feel like a samurai warrior who has studied the iron like it is an extension of my own body.

Fucking wrong.

The solder isn't taking. I'm prodding around like a 15 year old trying intercourse for the first time. Everything is dry and I'm poking in the wrong spots. Very quickly everything ends. There is solder fucking everywhere. I swear to god I have bridged SP2 to the capacitor on the right. It's a fucking mess.

For shits and giggles I figure I will plug it all in and see what happens. GREEN! Wtf? I dunno how but it's working.

I'm dumping the NAND now but I am sure I fucked it up. It's the worst job I have seen by far and there is no way I'm posting pics of this fucking abortion of an installation.

Wish me luck.
Click to expand...

Very nice story, but with pictures will be better, go buy some solder wick and i will go buy some popcorn waiting for you next post .
 
Tinkerbell

Tinkerbell

Well-Known Member
Member
Level 5
Joined
Jun 29, 2020
Messages
110
Trophies
0
Age
34
XP
606
Country
United Kingdom
Dany-69 said:
Guys, after reading copious pages of this thread, I still don't figure out where to buy SX Core at a decent price, delivered before 1 month e with a decent amout of certainty about not receiveing a stone or an empty box (paypal seems useless for this type of buy, the same for aliexpress protection... so what?).
Can someone help?
I've read some suggestions for YF-1GAME Store, someone has good feedback for them?
Click to expand...
I bought my SX-Lite from them and it only took a week to arrive.
 
B

bodgy

Member
Newcomer
Level 1
Joined
Jun 17, 2020
Messages
22
Trophies
0
Age
23
XP
110
Country
Australia
So my switch is working great backups are installed and working fine so my kid is happy.

I would also like to install Android now so that I can use parsec to stream games from my pc for some lazy couch gaming when he goes to bed.

Any pointers/info/tutorials for installing Android on a switch with an sx core? Are there any specific differences I need to look out for as opposed to an unpatched unit?

Thanks.
 

Site & Scene News

Go to forum More news

Popular threads in this forum

Hacking Misc  Getting the MIG Switch to load an XCI dump without its original Initial Data

DBI language error

Emulation Homebrew  duckstation for Switch

Can you trade in a banned switch for an unbanned one?

Why is Atmosphere so dominant?

Last switch firmware blocking MIG SWITCH?

Crosscode Hacking thread

Hacking  Loader.kip for AMS 1.7.0 with FW 17.0.1 - sys-clk error ??

General chit-chat
Help Users
  • TwoSpikedHands @ TwoSpikedHands:
    I just found out that the EU version is better in literally every way, better sound quality, better lighting, and there's even a patch someone made to make the text look nicer
  • TwoSpikedHands @ TwoSpikedHands:
    Do I restart now using what i've learned on the EU version since it's a better overall experience? or do I continue with the US version since that is what ive been using, and if someone decides to play my hack, it would most likely be that version?
  • Sicklyboy @ Sicklyboy:
    @TwoSpikedHands, I'll preface this with the fact that I know nothing about the game, but, I think it depends on what your goals are. Are you trying to make a definitive version of the game? You may want to refocus your efforts on the EU version then. Or, are you trying to make a better US version? In which case, the only way to make a better US version is to keep on plugging away at that one ;)
  • Sicklyboy @ Sicklyboy:
    I'm not familiar with the technicalities of the differences between the two versions, but I'm wondering if at least some of those differences are things that you could port over to the US version in your patch without having to include copyrighted assets from the EU version
  • TwoSpikedHands @ TwoSpikedHands:
    @Sicklyboy I am wanting to fully change the game and bend it to my will lol. I would like to eventually have the ability to add more characters, enemies, even have a completely different story if i wanted. I already have the ability to change the tilemaps in the US version, so I can basically make my own map and warp to it in game - so I'm pretty far into it!
  • TwoSpikedHands @ TwoSpikedHands:
    I really would like to make a hack that I would enjoy playing, and maybe other people would too. swapping to the EU version would also mean my US friends could not legally play it
  • TwoSpikedHands @ TwoSpikedHands:
    I am definitely considering porting over some of the EU features without using the actual ROM itself, tbh that would probably be the best way to go about it... but i'm sad that the voice acting is so.... not good on the US version. May not be a way around that though
  • TwoSpikedHands @ TwoSpikedHands:
    I appreciate the insight!
  • The Real Jdbye @ The Real Jdbye:
    @TwoSpikedHands just switch, all the knowledge you learned still applies and most of the code and assets should be the same anyway
  • The Real Jdbye @ The Real Jdbye:
    and realistically they wouldn't

    be able to play it legally anyway since they need a ROM and they probably don't have the means to dump it themselves
  • The Real Jdbye @ The Real Jdbye:
    why the shit does the shitbox randomly insert newlines in my messages
  • Veho @ Veho:
    It does that when I edit a post.
  • Veho @ Veho:
    It inserts a newline in a random spot.
  • The Real Jdbye @ The Real Jdbye:
    never had that i don't think
  • Karma177 @ Karma177:
    do y'all think having an sd card that has a write speed of 700kb/s is a bad idea?
    trying to restore emunand rn but it's taking ages... (also when I finished the first time hekate decided to delete all my fucking files :wacko:)
  • The Real Jdbye @ The Real Jdbye:
    @Karma177 that sd card is 100% faulty so yes, its a bad idea
  • The Real Jdbye @ The Real Jdbye:
    even the slowest non-sdhc sd cards are a few MB/s
  • Psionic Roshambo @ Psionic Roshambo:
    https://www.youtube.com/watch?v=SjCivnt5t50
  • Karma177 @ Karma177:
    @The Real Jdbye it hasn't given me any error trying to write things on it so I don't really think it's faulty (pasted 40/50gb+ folders and no write errors)
  • DinohScene @ DinohScene:
    run h2testw on it
     +1
  • DinohScene @ DinohScene:
    when SD cards/microSD write speeds drop below a meg a sec, they're usually on the verge of dying
     +1
  • Psionic Roshambo @ Psionic Roshambo:
    Samsung SD format can sometimes fix them too
  • Purple_Heart @ Purple_Heart:
    yes looks like an faulty sd
  • Purple_Heart @ Purple_Heart:
    @Psionic Roshambo i may try that with my dead sd cards
     +1
  • Psionic Roshambo @ Psionic Roshambo:
    It's always worth a shot
    Psionic Roshambo @ Psionic Roshambo: It's always worth a shot