Hacking [Release] rxTools - Roxas75 3DS Toolkit [fw 2.0 - 9.2]

[urherenow]

o3ds: rxtools/firm/0004013800000002_cetk.bin
n3ds: rxtools/firm/0004013820000002_cetk.bin

@Dean_

 

[Dean_]

o3ds: rxtools/firm/0004013800000002_cetk.bin
n3ds: rxtools/firm/0004013820000002_cetk.bin

@Dean_

Why did you tag me?

 

[Ambassador]

why you do not make spider exploit support for rx3.0 ?

 

[urherenow]

Why did you tag me?

Getting lost in the thread... You posted the cetk links but then I thought you couldn't figure out what to do with them. Or if you did figure it out, you didn't share in which case you deserved tagging for a different reason.

Edit: checked again. Last you said was to simply download the cetk and place in /sys. That was wrong.

 

[Shadow#1]

does the latest nightly still work on ninjhax 1.1?

 

[Dean_]

Getting lost in the thread... You posted the cetk links but then I thought you couldn't figure out what to do with them. Or if you did figure it out, you didn't share in which case you deserved tagging for a different reason

Where did you find that path?
All I can see in the source is "SYS_PATH/cetk" which is /rxTools/sys/cetk

 

[urherenow]

n3DS 9.0.20E:
Installed manualy the new payload from smealum. Installed the new 2.5 HBL from smealum also.
Standby is working. eShop is working. rxTools is booting fine from 2.5 HBL. CakesFW does not start for me on 2.5 HBL.

does the latest nightly still work on ninjhax 1.1?

Looks like the person above you got it to run with 2.5, so why not give it a shot?

@Dean_ 173210 gave it to me.
Edit: configuration.c: getOrgFirmPath(path, hiId, "_cetk");
and as you now know, the firmware path is now /rxtools/firm

 

[dmc310]

Does this work with the new 2.5 update??

 

[urherenow]

Where did you find that path?
All I can see in the source is "SYS_PATH/cetk" which is /rxTools/sys/cetk

also, SYS_PATH/cetk may have been in the cetk commit, but it doesn't exist in the current tree (confused because I don't see a commit that mentions the change...)

Anyway, 173210 has a fix for the data installation error. Just needs to be merged.

 

[Shadow#1]

ok ill try 2.5 my only concern is if dycript9 still works and pastacfw

 

[Dean_]

also, SYS_PATH/cetk may have been in the cetk commit, but it doesn't exist in the current tree (confused because I don't see a commit that mentions the change...)

Anyway, 173210 has a fix for the data installation error. Just needs to be merged.

https://github.com/roxas75/rxTools/...2b2#diff-3d6e6ec0dc86cb98e2fabd3870eaecebR277

Well, it's definitely changed to _cetk

https://github.com/roxas75/rxTools/...38b#diff-3d6e6ec0dc86cb98e2fabd3870eaecebR306

 

[Shadow#1]

...

 

[temper999]

For the release rxTools_10-02-15_19-07.9f48bb8 on n3DS this was to do:

• In Reinand archive find firmware.bin
• extract it to rxtools/data
• rename the firmware.bin into 0004013820000002orig.bin

Does this has changed for the newer rxTools releases?

 

[urherenow]

in the newer releases, n3ds is broken. Don't even bother right now.

Latest nightly should be fixed for o3DS data installation issue, as long as you have your setup done correctly (look at the readme in the tools folder)

Latest Git commit: cbec77e
Latest build: cbec77e
Build date: 15-10-27 @ 05:46 UTC
Builder: XEON VPS Buildbot

 

[Shadow#1]

Nice all working again on 1.1b

 

[omegart]

For the release rxTools_10-02-15_19-07.9f48bb8 on n3DS this was to do:

• In Reinand archive find firmware.bin
• extract it to rxtools/data
• rename the firmware.bin into 0004013820000002orig.bin

Does this has changed for the newer rxTools releases?

I use the same one and it works like a charm form me. You better stay at this one and wait for the final release or at least a release that bring somthing new to n3ds.

 

[Drynk]

Did it last night on my old 3ds, it works great thanks, now I'm trying to install it on my jap n3ds (i just want to get my nand xorpad to change my jap emunand to usa) using mset but mset installer doesn't have a 9.x rxtools only 4.x, 4.x dg, 6.x, 4.x ndg, wich one should i use?

edit: my mset is already downgraded i used it to boot Gateway, with a few try, i found out that i had to use the option 4.x dg.

 

[VerseHell]

You need to downgrade your mset.

 

[Deleted User]

So I decided to upgrade my old3DS to 9.2.0-20U.

I decided to do the whole auto-boot method for RXTools.

However, when I used browserhax to launch the homebrew loader, and choose the themehax installer, I just get the following error.

Invalid HTTP content-size: 0x0000a45c
Failed to download the actual payload with HTTP: 0xfffffffd
Installed failed 0xffffffffd

My internet is enabled, is the themehax installer down?

Ideally I'd like to use themehax to autoboot (without holding L) to go to emunand. It's working fine on my other 3DS.

 

[tivu100]

So I decided to upgrade my old3DS to 9.2.0-20U.

I decided to do the whole auto-boot method for RXTools.

However, when I used browserhax to launch the homebrew loader, and choose the themehax installer, I just get the following error.

Invalid HTTP content-size: 0x0000a45c
Failed to download the actual payload with HTTP: 0xfffffffd
Installed failed 0xffffffffd

My internet is enabled, is the themehax installer down?

Ideally I'd like to use themehax to autoboot (without holding L) to go to emunand. It's working fine on my other 3DS.

Download the offline themhax installer. Has been helping another person with this, so check out that thread https://gbatemp.net/threads/offline-installer-of-themehax-dont-work.401033/#post-5763926