Hacking [Release] rxTools - Roxas75 3DS Toolkit [fw 2.0 - 9.2]

[Melon__Bread]

Is that the same thing as this: https://www.dropbox.com/sh/blmecish...kLZ2a/rxTools_08-12-15_21-21.30ea332.zip?dl=0 because that build doesn't work with MSET on my N3DS?

No clue, I have never used his builds.
(Although it is not like he is doing anything I am doing besides maybe building in Windows, which should not matter).
All I know is that I am using the latest build (that I built my self), and followed these instructions:
http://gbatemp.net/threads/release-...olkit-fw-2-0-9-2.382782/page-441#post-5614044

Erf..... The only feature I wanted (nand frim 0/1 dumping) isn't available

Yup those are still getting ironed out IIRC

 

[bache]

Is that the same thing as this: https://www.dropbox.com/sh/blmecish...kLZ2a/rxTools_08-12-15_21-21.30ea332.zip?dl=0 because that build doesn't work with MSET on my N3DS?

It appears to be a newer build, as the commit Melon_Bread linked is from 7 hours ago, which is after the release you and I tested was uploaded to Dropbox.

 

[WhoAmI?]

You're both lucky and there must have been some fixing since the compiling support thread was created. In the past, mingw/bin had to be in your path BEFORE devkitpro/devkitarm/bin or it would not build.

Nah. I manually edited my system path via the registry. I never had to refer to any support thread, I just knew what I was doing

No clue, I have never used his builds.
(Although it is not like he is doing anything I am doing besides maybe building in Windows, which should not matter).
All I know is that I am using the latest build (that I built my self), and followed these instructions:
http://gbatemp.net/threads/release-...olkit-fw-2-0-9-2.382782/page-441#post-5614044


Yup those are still getting ironed out IIRC

I usually use Linux to build rxTools Nightlies but my latest build was done on Windows because I was too lazy to turn on the Linux machine. I doubt it makes a difference, as you stated.

 

[Cindakil]

I have Reinand working by MSET in my New3DS. What are the steps to follow to make RX working in my n3DS by MSET?

THANKS

 

[itazchu]

4.X O3DS no GW no dsflashcard
use lastbuild rxTools_08-12-15_21-21.30ea332
I can visit http://dukesrg.no-ip.org/3ds/cakes?rxTools/system/code.bin to lanuch rxtools well
I found code.bin in mset so how can I use it

--------------------- MERGED ---------------------------


you said mset worked which did you used ds flashcard or code.bin?

I use ds flashcard method using dstwo and I am on the same exact build rxTools_08-12-15_21-21.30ea332.

 

[srwgin]

just Installing Sudokuhax on my O3DS 4.4
then use lastbuild rxTools_08-12-15_21-21.30ea332
it works fine
and game manual works well before that when I read manual it crash

 

[Shadowtrance]

Erf..... The only feature I wanted (nand frim 0/1 dumping) isn't available

You know you can dump those partitions with Decrypt9 right?

 

[Ronhero]

You know you can dump those partitions with Decrypt9 right?

Hem.... I might have to do that and see if the inject works

 

[ironmaster49]

Guys me and @nastys are working on updating the theme of http://rxtools.net , to match the new rxtools 3.0's theme.

We need your opinion: Which is the best?
http://dl.albertosonic.com/rxtools1 VS http://dl.albertosonic.com/rxtools

Will you use the original rxtools.net site? Both looks good but i like second one a bit better thank you for working on rxtools

 

[AlbertoSONIC]

Will you use the original rxtools.net site? Both looks good but i like second one a bit better thank you for working on rxtools

Yes we'll continue to use rxtools.net. I uploaded the new gui to my site to have a quick preview

 

[ironmaster49]

AlbertoSONIC did you fix the problems with latest rxtools nighly with the agb_firm (Gameboy Advance), Super Smash Bros and TWL(Dsiware 4 swords) mode not working?

--------------------- MERGED ---------------------------

Pasta cfw and rxtools come from italy!!

 

[paulyd]

Guys me and @nastys are working on updating the theme of http://rxtools.net , to match the new rxtools 3.0's theme.

We need your opinion: Which is the best?
http://dl.albertosonic.com/rxtools1 VS http://dl.albertosonic.com/rxtools

Definately rxtools1

 

[AlbertoSONIC]

AlbertoSONIC did you fix the problems with latest rxtools nighly with the agb_firm (Gameboy Advance), Super Smash Bros and TWL(Dsiware 4 swords) mode not working?

--------------------- MERGED ---------------------------

Pasta cfw and rxtools come from italy!!

Not yet

 

[ironmaster49]

Ok but well done on your work. Is pasta cfw dead now? well i like rxtools more so its good

 

[Zap Rowsdower]

You know you can dump those partitions with Decrypt9 right?

You say this as if a number of us aren't desperately trying to get Ninjhax 1.1 running through rxTools because importing a copy of that god damned cartridge would cost us a kidney.

 

[ironmaster49]

Yeah i don't really think you should devote your time working on things for ninjhax because you have to get a rare cartridge that not many people have for it. and one of the reasons i use rxtools is for homebrew because i cant get a copy of CN

 

[Shadowtrance]

If you look hard enough you'll find a reasonably priced copy eventually.

 

[ironmaster49]

If you look hard enough you'll find a reasonably priced copy eventually.

But i dont really want to spend on a game if i can get a free alternative for homebrew: RxTools + Mset/Spider exploit

--------------------- MERGED ---------------------------

And the game cubic ninja i dont really like it. Should i try a pirated version of cubic ninja as the developers dont make money out of the game anymore or is that not allowed?

--------------------- MERGED ---------------------------

And will cn as a cia work with ninjhax?

 

[Shadowtrance]

Well don't then, no need to bitch about it. I couldn't care less either way and as it stands currently rxtools is all over the place. Atleast Decrypt9 works and does the job it's supposed to do.

 

[ironmaster49]

Ok about that but i mean not too many people use it and probably shouldnt be a top priority but can a cia cubic ninja copy work well with ninjhax? oh wait i heard smea was gonna release ironhax so free ninjhax if you can make rxtools work with ninjhax 2.0 and its gonna be free