Hehe. I used it on a 2tb fake card. it took more than 36 hours to fill it and another 36 hours to test the files written to the sd. The speeds were atrocious. In the end the card only had 8gb of actual space. Needles to say aliexpress refunded me in full. I knew the card was fake, but I still wanted to test it . The power used by the pc running all that time was probably more expensive than the actual card.
Is there any og xbox original chip on aliexpress can buy or only softmod.
So sorry for ask here.,
The rp2040 chip on v1 nicely fit where can put and the case no need ty secrws more to close any info.
Can you tell me how cut like this it is very nice man...some people put the chip on the outside of the shield and route wires through the fan hole, but I'd recommend just cutting the shield for a nice fit.
Can you tell me how cut like this it is very nice man...
Hello,Just want to share experience.
This cable is good (red 40awg)
https://www.aliexpress.com/item/1005005454458676.html
The isolator are not easily melted.
The smallest insulated wire i ever used.
The cons is the price.
Yes, if i ignored the prices. The 40awg is the best.Hello,
Do you prefer these instead of the enameled ones?
is more than enoughwith a dremel and a metal cutting disc
Do you have a recomendation for single core that is not easily melted?Just want to share experience.
This cable is good (red 40awg)
https://www.aliexpress.com/item/1005005454458676.html
The isolator are not easily melted.
The smallest insulated wire i ever used.
The cons is the price.
Yeah, if you are cutting like i did (photo) that is enough, but If you want to cut like deeps did (only a square inside the shield) then you need some more tools because using scissors will bend the metal too muchis more than enough
It is true, with scissors you bend the initial part but with your fingers you return to the initial position. Then eventually when you do 3 or 4 a day you get thrung out and start tearing them with your handsYeah, if you are cutting like i did (photo) that is enough, but If you want to cut like deeps did (only a square inside the shield) then you need some more tools because using scissors will bend the metal too much
another guy loves dat1 more than dat0?Hi friends, I have a little problem when I do a direct wiring, eMMC for the CLK nothing works the original pico *=* boot I did a continuity test on the AC point under the metal plate, I have well my continuity on my multimeter.
Thanks mate, damn I have shit in my eyes. I wanted to innovate and finally I did shit on some crazy thinganother guy loves dat1 more than dat0?
I wonder what is the science behind these phenomenon.another guy loves dat1 more than dat0?