https://vi.aliexpress.com/item/1005005600921459.htmlI remember seeing that but couldn't find it anywhere. What does it call?
https://vi.aliexpress.com/item/1005005541039763.html
https://vi.aliexpress.com/item/1005005600921459.htmlI remember seeing that but couldn't find it anywhere. What does it call?
Give it a proper clean and inspect it. If the trace is broken, it must be fix. There are two methods you can add a solder to see if it connects the both. But not recommend without proper skill.Thank you all. Here's a clearer picture.
@Dee87
@bilalhassan341
@Danook28
@Adran_Marit
Any further input is appreciated.
Dee, This is not my work. I'm inquiring for a friend who has this Switch.
There is a point on board. You have to grind up the board to add a Dat0 point. Right Now, I don't have a pic. But you can find it online. If I find I'll edit this post.By removing the eMMC chip and soldering a wire to the third point? Is this how you do it?
Because of these cheap one dat0 adapter, We can damage our emmc chip or may be corrupt it. See @QuiTim Post below for a nice quality adapter.The dat0 point is It not a small open arc, it is a closed circle. Should it be cut in the middle???
Error: *== No eMMC CMD1 request (poor wiring, or dead CPU)picofly 2.73 i have blue, short green, long green long green. anyone know what this code could be? i changed RPI 2040 zero(have only 2), changed wires, re solidered few times.
i have used 0.1mm wires, then dubule 0.2 wire
tried 2 mosfets, 1mosfet- same
tried 2, 47 Ohm resistor on data and clk…
anybody found solution?
it load OFW every time
Error: *== No eMMC CMD1 request (poor wiring, or dead CPU)
Edit: Check the wires with multimeter.
Also, try to press the reset button when joycon logo appears. If it shows No SD Screen, then solder the SDA and SCL wires.
yes.The message I got is that it has been changed to 47ohm.It would seem that the RP2040-Tiny boards on the Waveshare site are no longer on back order!! :D :D :D
Both with and without the USB port adapter!
Wonder if it now has the right resistors?
Excellent! Any recommendation of where to purchase them now? I guess only directly on the Waveshare site as the Aliexpress sellers won't have received them yet? I could be wrong of courseyes.The message I got is that it has been changed to 47ohm.
What is the Program ID?guys please help, i successfully installed pico chip and im booting to hekate, but no matter what i try i could not boot to atmoshere, using the latest HATS files, tried to boot from Hekate to OFW but i got only black screen after the nintendo logo, error for atmophere is sometimes unable to identify package 1 atmosphere and Error Desc: std: :abort() (0xFFE)
what i did i do wrong, both switch lite and unpatched switch v1 with pico mod chip installed but same exact error cant boot to atmosphere
yes.The message I got is that it has been changed to 47ohm.
Correct, as long as you actually do get receive the board with 47 ohm resistors on pins 27, 28 & 29.So we don’t need to add 47ohm to rp2040-tiny?
Correct, as long as you actually do get receive the board with 47ohm resistors on pins 27, 28 & 29.
You'll need to verify it when you receive it!
I believe so. I'm far from an expert though. I'm sure someone will confirm or correct meAnd the points are the same as rp2040-zero?
Thanks!
sure add flux and a lot of low melt solder.......... still gonna be tough , but doablehello
do you think solder wick can absorb the lead solder on the RP2040 zero 4 leg ??
im having trouble remove the leg
View attachment 373592
im planning buy solder wick...
but kinda hesitate if it doesnt work, if the wick cant absorb it
View attachment 373593
Try this: https://gbatemp.net/threads/picofly-aio-thread.628951/post-10166614hello
do you think solder wick can absorb the lead solder on the RP2040 zero 4 leg ??
im having trouble remove the leg
View attachment 373592
im planning buy solder wick...
but kinda hesitate if it doesnt work, if the wick cant absorb it
View attachment 373593
What do you mean with:picofly 2.73 i have blue, short green, long green long green. anyone know what this code could be? i changed RPI 2040 zero(have only 2), changed wires, re solidered few times.
i have used 0.1mm wires, then dubule 0.2 wire
tried 2 mosfets, 1mosfet- same
tried 2, 47 Ohm resistor on data and clk…
anybody found solution?
it load OFW every time
(writen in topic short long long by @longson008 )