Hacking Hardware Picofly - a HWFLY switch modchip

[Takezo-San]

What mosfets are you using, is it the IR8342?

yep

 

[abal1000x]

.

 

[Takezo-San]

Then the probable explanation is the gate somehow got charged.

What if the gate got charged when you test the G and S using multimeter. Those multimeter give the G and S the voltage it needed to open. I have spare IR8342 in somewhere, gonna try this scenario. If it really the scenario then the resistor is a advisable to avoid this kind of mistakes.

Thats what i think happened too. Your right, maybe a resistor is needed because if i remember correctly, the hwfly adaptors have two mosfets with a couple of resistors on the adaptor too. Not just one or worse, none like my case.

 

[abal1000x]

.

 

[Takezo-San]

Have tried the IR8342 without connecting it to others. It didn't happened.
Might be happened when its connected to the picofly and apu.
Maybe theres a capacitance that enough to power up the gate.

To be safe, for now onward, add pulldown resistor.

Yep, just thinking about it more and some research on mosfets. Maybe closing the gate or giving no power sort of turned it on in an inverse way. I don't know. need more knowledge about these damn things. Just so many types mosfets/transistors and mechanisms of action. Anyway, thanks for the input.

 

[abal1000x]

.

 

[agus]

picofly is the best.

Post automatically merged: May 21, 2023

can i get a picture. what about the pi pico (green rp2040) cut so it's smaller

Post automatically merged: May 21, 2023

can i get a picture. what about the pi pico (green rp2040) cut so it's smaller

 

[werbylow]

I launched ubuntu on my switch LITE and everything works for me, but there is one glitch:
in any program, for example, in a bowser has automatic scrolling down
this happens on two different consoles

 

[lightninjay]

I launched ubuntu on my switch LITE and everything works for me, but there is one glitch:
in any program, for example, in a bowser has automatic scrolling down
this happens on two different consoles

Possible you have joycon drift that needs to be calibrated out/Joycon removed?

 

[werbylow]

Possible you have joycon drift that needs to be calibrated out/Joycon removed?

this happens on two NEW different consoles

 

[lightninjay]

this happens on two NEW different consoles

Welp, this is a Picofly thread, not an Ubuntu thread, so I guess you'll have to find help elsewhere.

 

[Warbeast]

I guess it's best to add the 1k resistor to the mosfet itself but for us that already have the mosfet wired and fixed with resin will adding a 1k resistor as close to the mosfet as possible between cpu gate and ground help?
My cpu wire runs out under the soc shield so adding a 1k between the ground shield and the cpu wire would save removing the heatsink and mosfet..

 

[abal1000x]

.

 

[Adran_Marit]

To you and all the other people who expect instantaneous updates on a guide which was made for free, on my time that I spend after work, for an update that is still LARGELY BEING TESTED, I find it ridiculous that you're incapable of reading the exact updated info that I am going to paste into my guide, FROM THE DEV'S POST HIMSELF where you should be downloading the latest Alpha firmwares ANYWAY.

I digress, I was in the process of updating the guide, but I think I'm going to spend some time smoking a couple bowls and evaluating how much I actually enjoy helping entitled folks who can't help themselves.

Note: this post is not meant for all the appreciative people who have used my guide to LEARN how to do this process, instead of just expecting everything to be handed to them on a platter. To you, ROCK ON, and keep doing magnificent mods.

Me every time I do tech support, why did I get into this?

Because they apparently aren't public and only "suppliers" have them... what do you expect?

see this

It's the classic

Cheap + fast = lower quality work

Fast + good = expensive

Good + cheap = not happening anytime soon

My latest work begs to differ on that last option.... as for speed that depends how fast I get parts.... most customer stuff if I already have the parts are sub 24 hours turn around for cheaper than what EBGames/Gamestop does, especially considering I work full time

https://www.aliexpress.com/item/1005005528772252.html

Seems they actually put them on their store now. Plus all previous chips. Except I can't find the Instinct-NX

I ordered mine a day or two before they went awol

 

[EAGLE-1]

If you could to afford hwfly, their hw design is actually better. So for someone who love better hw with more cost, then go for it. The flex cable include VDD from APU, which the voltage might be monitored in the rp2040, they might modify the firmware to include those feature though.

I think those VDD line could be used to detect the undervoltage glitch. When the joycon shows, the voltage dropped from around 1.8V to 1.0V then 0.6V.

I still choose the cheapest price, cost do matter.

well we like hwfly because the flex function,is more friendly for us ( no professionals) to install then ,BUT i still cant figure out why they cant be updated via usb,today i try to update via toolbox,hope works because right now,return to seller is not a good option,we loose a lot of mopney in shipping,imort taxes,etc,i just hope can use those "weird chips) and then can use yours

 

[abal1000x]

.

 

[QuiTim]

What do you mean with cant update via usb?

Nooooo man, don't do it noooooo.....

 

[voidz9]

Nooooo man, don't do it noooooo.....

 

[EAGLE-1]

Me every time I do tech support, why did I get into this?


see this


My latest work begs to differ on that last option.... as for speed that depends how fast I get parts.... most customer stuff if I already have the parts are sub 24 hours turn around for cheaper than what EBGames/Gamestop does, especially considering I work full time


I ordered mine a day or two before they went awol

your order those same mine right? so you dont have problems using then?? i mean most moderators here toll me they dont suport " those chips" and because i dont have an support still cant figure out if they need or no updated,in the store they say " pre installed firmwarethey say this in their website "All chip pre installed stable firmwares,suport all consoles directly! No suggest flash to unstable 0.7.2 !",The idea is when I run out of these chips to be able to use the ones that everyone in the group uses, BUT the flex option is very comfortable for those of us who are not professionals,so today i will try to update one of this chips via toolbox,i dont have more options,pc never see then,if the chip burns or dont acept the update i totally loss

Post automatically merged: May 21, 2023

What do you mean with cant update via usb?

The pc does not detect them, I have tried in all possible ways, I pressed the boot button, I did not press it and nothing, the pc does not see them, if I connect one of my old hwfly using the same cable, the same mini ubs port the pc does Go right away and I can update them without problem using the bat.bin file, unless of course I'm doing something wrong but it's not NASA science, that is, the PC should recognize them but it doesn't, only when the chip is connected to the switch turn on the leds

 

[Dandan0404]

i have 2.67 should i update to 2.73 or just stay it is. i heard from discord 2.72 could brick pico? is it worth updating?