That is not for the xiao rp2040, it's my understanding there is no RCM injection firmware for the rp2040 (yet )There is an uf2 build for seeduino Xiao under fusee suite from Mattytrog.
That is not for the xiao rp2040, it's my understanding there is no RCM injection firmware for the rp2040 (yet )There is an uf2 build for seeduino Xiao under fusee suite from Mattytrog.
If its only for one time use, the magnifying headband will get the job done.Just a quick question, is everyone using microscopes to solder? Is there something cheap I can use? Seen mixed thoughts on them magnifying headband things
i didnt use it, with a bit of patient and good lightingatleast most of us are using microscope for microsoldering otherwise its hard to see anything , magnifiying headband things never used them but if they magnifiy enough it should work i guess
Yeah, It's a bit annoying, I plan to get a microscope soon. Anyway, I can take really close images from my phone (see example, it's the rst pin), but for this project I consider microscope a must have.You need both of them, plus some additional files. There are alot of guides on how to do that (a couple of them in this thread aswell).
Just google "switch homebrew" and you will have all ypur answers because this precedure is the same whichever modchip you use.
Post automatically merged:
I Installed my first one with my camera phone and it was pain in the a**
If you plan on ever doing any smd solderin in the future get a microscope (it does not have to be high end)
Yeah works.Hello everyone asking can i use switch lite flex on switch oled for picofly? Is this working or nah? TIA
Wow, great job if you managed to soder those with just a magnifying glass.Yeah, It's a bit annoying, I plan to get a microscope soon. Anyway, I can take really close images from my phone (see example, it's the rst pin), but for this project I consider microscope a must have.
It's best if you could find a Oled Switch that usees a non Toshiba/Kioxia EMMC but I dont think there is a way to know what Emmc chip is used without disassembling the console.hello everyone, im interested in doing this install. i have a v1 trinket switch and have been reading about the rp2040 zero install but dont know how to start. im looking to buy a oled switch and am wondering if a certain version is better than another. also which version hwfly flex cables are best for oled? any advice is much appreciated.
thanks for the info. would a v4.1 hwfly flex cable set do? do i need a dat0 adapter? sorry for the all the questions. im trying to order a set and would like the right oneIt's best if you could find a Oled Switch that usees a non Toshiba/Kioxia EMMC but I dont think there is a way to know what Emmc chip is used without disassembling the console.
Even if you get (un)lucky and get an Oled with Toshiba, @rehius fixed this with the latest firmware so you should be OK.
As for the cables, any cable with the vertical connection for SP1 and SP2 will work (so Core cables, Lite Cables, Oled cables, all of them apart from V1).
You are right, you do need a dat0 adapter for Oled. Get the yellow one with 4 anchor points, it is much more reliable than the black ones.thanks for the info. would a v4.1 hwfly flex cable set do? do i need a dat0 adapter? sorry for the all the questions. im trying to order a set and would like the right one
have you a link from alliexpress ?3x 47 ohm resistors
Hello everyone asking can i use switch lite flex on switch oled for picofly? Is this working or nah? TIA
ahh nice to know thanksIt's best if you could find a Oled Switch that usees a non Toshiba/Kioxia EMMC but I dont think there is a way to know what Emmc chip is used without disassembling the console.
Even if you get (un)lucky and get an Oled with Toshiba, @rehius fixed this with the latest firmware so you should be OK.
As for the cables, any cable with the vertical connection for SP1 and SP2 will work (so Core cables, Lite Cables, Oled cables, all of them apart from V1).
Don't try without resistors. My whole nand got corrupted.Anyon, any to tell me what I'm doing wrong and also I'm not using any of the resistors. Still waiting on them in the mail I got some before but the system wouldn't boot with them installed
try to update hekateAnyon, any to tell me what I'm doing wrong and also I'm not using any of the resistors. Still waiting on them in the mail I got some before but the system wouldn't boot with them installed
People not using resistors causes boot0 issuesI often see people saying that they have recently broken their NAND or boot0, but what is the mechanism behind this happening? It might be a good idea to compile a list of things to be aware of to prevent this from happening. What do you think?
I've done my 2 oleds and a v2 using these that I borrowedYeah, It's a bit annoying, I plan to get a microscope soon. Anyway, I can take really close images from my phone (see example, it's the rst pin), but for this project I consider microscope a must have.