Looking at the video, if it's the blue cable that's used to make it longer then it looks like it's the CMD line.
Ok thanks, I will test after work later and get back to you.
Looking at the video, if it's the blue cable that's used to make it longer then it looks like it's the CMD line.
Looking at the video, if it's the blue cable that's used to make it longer then it looks like it's the CMD line.
it should be. You can but the straight mosfet, however I recommend getting the hwfly cpu flex cable and soldering to the middle two pins of thatWhere I can buy this HWFLY mosfet for pico? And last question will rp2040 one will be compatible with this mod? I founded service where they can mod my switch lite with this picofly chip
yes, people here are working on it as wellI saw mutiple creators (at least 3) on Bilibili are doing the custome rp2040 board. It's coming my friends.
which service did you findWhere I can buy this HWFLY mosfet for pico? And last question will rp2040 one will be compatible with this mod? I founded service where they can mod my switch lite with this picofly chip
which service did you find
Post automatically merged:
is their a list of people who will install this?
i asked some people on ebay and they all said noNot on here there isn't. there used to be a service like that here on the temp, but that got shut down.
I know there are people in certain groups that would do it, but I'm not sure if they would offer servicesi asked some people on ebay and they all said no
Local in my Country. I decided to use rp2040 zerowhich service did you find
Post automatically merged:
is their a list of people who will install this?
Wow ok, extended CMD double length, it flashed green once, booted, but did not get my SD booted. It booted to OFW.
Never went green again, just pulsing blue for ages.
I'm going to lengthen the RST line now...
correct, make sure you have the flex cable suitable for your console (lite for lite etc) and at least 3, 47 OHM smd resistors, size 0805 or smaller.Local in my Country. I decided to use rp2040 zero
I need rp2040 zero, HWFLY flex cable. And resistors Yes?
i only need to buy picofly, flex cable and resistors for switch lite. Everything else they do for me in computer servece. I pay for this 70 euro. Is acceptable price for working lite unit with this new modchip. I may spar two switch physical games.correct, make sure you have the flex cable suitable for your console (lite for lite etc) and at least 3, 47 OHM smd resistors, size 0805 or smaller.
1k ( 1072 )Lot of respects for you guys. Huge work here, congrats.
Can someone please give me the values of those resistor, red, blue, green, and those two mosfets in yellow ?View attachment 360567
Also do you know with which software can we open leaked HWFly leaks schematics/ board files ? I tried Eagle/Kicad they are not working. Altium works but layout of pcb seems broken (see where the mosfet emplacement should be in white):
View attachment 360568
Thanks
NP2016 , 1k ( 1072 )Lot of respects for you guys. Huge work here, congrats.
Can someone please give me the values of those resistor, red, blue, green, and those two mosfets in yellow ?View attachment 360567
Also do you know with which software can we open leaked HWFly leaks schematics/ board files ? I tried Eagle/Kicad they are not working. Altium works but layout of pcb seems broken (see where the mosfet emplacement should be in white):
View attachment 360568
Thanks
Lot of respects for you guys. Huge work here, congrats.
Can someone please give me the values of those resistor, red, blue, green, and those two mosfets in yellow ?View attachment 360567
Also do you know with which software can we open leaked HWFly leaks schematics/ board files ? I tried Eagle/Kicad they are not working. Altium works but layout of pcb seems broken (see where the mosfet emplacement should be in white):
View attachment 360568
Thanks
Lot of respects for you guys. Huge work here, congrats.
Can someone please give me the values of those resistor, red, blue, green, and those two mosfets in yellow ?View attachment 360567
Also do you know with which software can we open leaked HWFly leaks schematics/ board files ? I tried Eagle/Kicad they are not working. Altium works but layout of pcb seems broken (see where the mosfet emplacement should be in white):
View attachment 360568
Thanks
Follow up Question....Hello, I need help before sending it to a technician. gonna summarize what i learned. please correct me if im wrong.
gonna install picofly
PRE-install:
-reformat 256gb card to Fat32
-put HATS pack by sthetix on clean formatted FAT32 sd card (PC +card reader)
-flash pico with 2.5+ unlock.uf (the 4mb size one) by Vittorio
-desolder buttons and USB C in pico
-flex cable solder ONLY THE 2 MIDDLE or 3RD AND FOURTH pins
INSTALLATION: (since no proper video of picofly)-gonna follow stehthix MOD kit installation while refering to the picture and modsvilleusa picofly video
POST-install:
-if all goes properly, i should immediately boot to hekate and access atmosphere right?
Hey this has probably been asked before but what’s the rule on selling a switch with the modchip I will not provide any piracy nor list any shops that allow you to pirate games for homebrew use only I would like to comply with the firmware maker so I was just wondering
You can sell here, but in our trading section. You probably don't have access to it yet.Hey this has probably been asked before but what’s the rule on selling a switch with the modchip I will not provide any piracy nor list any shops that allow you to pirate games for homebrew use only I would like to comply with the firmware maker so I was just wondering