Homebrew RELEASE [Overlay]fastCFWswitch

[RednaxelaNnamtra]

[CFWS]
type=section
name=cfws

[HEKATE]
name=Hekate
path=/bootloader/payloads/hekate_ctcaer_5.5.5.bin (GOT THIS ONE RIGHT )

[ATMOSPHERE]
name=atmosphere
path=/bootloader/payloads/fusee-primary.bin (GOT THIS ONE RIGHT )

but I don't know this one ?) iv been trying for the past 4 days no joke and I cant get it its very frustrating
iv tried so many different paths but i dont know the right one..... it either boot me to atmosphere or Hekate

[ANDROID]
name=Switchroot
path=/atmosphere/reboot_payload.bin
ID=SWANDR

Looks like it need to be this for you:

[ANDROID]
name=Android
bootId=SWANDR
path=/bootloader/payloads/hekate_ctcaer_5.5.5.bin

If android is properly setup, an booteable manually from Hekate, this block should boot to hekate, and hekate should then automatically start android.

 

[windswaker1738]

omg it worked!!! thank you so much

 

[Catzilla]

i got this working on Tesla and this app is super useful. If i dont use Tesla, is there an NRO alternative?

 

[RednaxelaNnamtra]

Anyone who is still on sxos wanne test if the new fastCFWswitch verison is still working on it?

 

[Muxi]

@RednaxelaNnamtra Are there any other changes compared to v1.2.0, except that it should run under the SX OS?

 

[RednaxelaNnamtra]

@RednaxelaNnamtra Are there any other changes compared to v1.2.0, except that it should run under the SX OS?

1.2.0 should already work on sxos, but in this version I implemented the newer more safe way to reboot to a payload, that atmospheres reboot to payload uses since recently. I just want to make sure, it still works on SXOS before releasing it. ^^

 

[Muxi]

I have tested the v1.3.0 on FW 12.1.0|AMS 0.20.0, but there are problems on reboot to AMS. It comes to a blackscreen. v1.2.0, on the other hand, runs without any problems.

 

[RednaxelaNnamtra]

I have tested the v1.3.0 on FW 12.1.0|AMS 0.20.0, but there are problems on reboot to AMS. It comes to a blackscreen. v1.2.0, on the other hand, runs without any problems.

What are you exactly trying to reboot to? For me it works with 0.19.5 and 0.20.0 without a problem.

 

[Muxi]

I have set the fusee-primary.bin of the AMS version 0.20.0 in the fastCFWswitch config.ini among others for the reboot to AMS.

 

[deejay87]

Work on Atmosphere 0.20.0 , but freeze on SXOS need to power off (previous 1.2.0 is working)

 

[RednaxelaNnamtra]

I have set the fusee-primary.bin of the AMS version 0.20.0 in the fastCFWswitch config.ini among others for the reboot to AMS.

Does atmospheres reboot to payload homebrew work for you?
Does FastCFWswitch show you a line saying "Classic Reboot"?

For me rebooting to Hekate, fusee-primary, reboot-payload.bin and android through hekate works without a problem.

--------------------- MERGED ---------------------------

Work on Atmosphere 0.20.0 , but freeze on SXOS need to power off (previous 1.2.0 is working)

Where is it crashing? when rebooting or when opening it? Does it say "Classic Reboot" in SXOS?

 

[deejay87]

When i choose in menu to reboot to Atmosphere, overlay and switch is freeze, need to power off, don't say nothing, freeze is directly when i clic the A button
Atmosphere > SXOS : i see the message "Rebooting" and work perfectly
Atmosphere > Android : don't show nothing, reboot is too much quick but work perfectly

 

[RednaxelaNnamtra]

When i choose in menu to reboot to Atmosphere, overlay and switch is freeze, need to power off, don't say nothing, freeze is directly when i clic the A button
On Atmosphere i see the message "Rebooting"

Ok, then I need to find a better way to detect the need for the classic reboot to payload method, for it to work with sxos.

 

[Muxi]

Does FastCFWswitch show you a line saying "Classic Reboot"?

No, I did not notice such a line.

Does atmospheres reboot to payload homebrew work for you?

Yes, this app works, however I have set a different payload for rebooting (ArgonNX, resp. ArgonNX-SE)

@RednaxelaNnamtra
Edit:
I don't know why, but now I can reboot to AMS without any problems under v1.3.0, however no message regarding "Classic Reboot" is displayed. I still had the AMS version 0.19.5 reboot app in my setting before, which resulted in a blackscreen when applied. In the meantime, I have replaced this app with the current version from the AMS 0.20.0 release. Does this app have any influence on the function of fastCFWswitch?

 

[RednaxelaNnamtra]

Work on Atmosphere 0.20.0 , but freeze on SXOS need to power off (previous 1.2.0 is working)

Hey, could you please test this version in SXOS, I changed the detection of sxos to reboot the classic way, hopefully this works. ^^

 

[deejay87]

Hi, same problem, the switch freeze

 

[RednaxelaNnamtra]

Hi, same problem, the switch freeze

Probably also not showing the "Classic Reboot" info in the overview of the possible reboots, or is it?

 

[Muxi]

It has nothing to do with a functional test under the SX OS, but I tested the v1.3.0-B2 under AMS 1.0.0 and tried to reboot to Lakka there, but unfortunately this ended in a blackscreen. Under v1.2.0, on the other hand, it works flawlessly.

 

[RednaxelaNnamtra]

It has nothing to do with a functional test under the SX OS, but I tested the v1.3.0-B2 under AMS 1.0.0 and tried to reboot to Lakka there, but unfortunately this ended in a blackscreen. Under v1.2.0, on the other hand, it works flawlessly.

which payload are you exaclty trying to reboot to? could you post your config?

 

[Muxi]

which payload are you exaclty trying to reboot to? could you post your config?

Here is my configuration that I use under v1.2.0 to boot lakka (the payload is Hekate), but which leads to blackscreen under v1.3.0-B2.