Hacking Nintendont

[Grmmish]

I have a question for the error of turok evolution ntsc-u version. with nintendont all cutscene are skipped after 30 seconds. the last time i tried turok, it was 1-2 years ago. at that time i thought that it will be fixed some day. because i would like to play it in ntsc not pal ^^ now i tried it again and the error is still there. will it be fixed one day? or it is not possible? the pal version plays the cutscenes fine, but the gameplay is not optimized. thanx for the answer in advance

Sorry. I don't have your answer but... Turok Evolution?? Man I had fun with that game but that was when I just had fun with anything and whatever I had. That game is so bad! Bad graphics, odd controls as far as I remember and a glitch fest. XDD I don't think the voice acting was that good either.... Why would you even care for that garbage? XDDDD

 

[pedro702]

I have a question for the error of turok evolution ntsc-u version. with nintendont all cutscene are skipped after 30 seconds. the last time i tried turok, it was 1-2 years ago. at that time i thought that it will be fixed some day. because i would like to play it in ntsc not pal ^^ now i tried it again and the error is still there. will it be fixed one day? or it is not possible? the pal version plays the cutscenes fine, but the gameplay is not optimized. thanx for the answer in advance

take a picture of your nintendont settings and see your iso md5.

 

[Gabberhead]

take a picture of your nintendont settings and see your iso md5.

in the compatibility list there have someone also post this. so i am not the only one who have this problem:

-> ERROR, game skip ALL cut scenes (only 30 seconds of cut scenes

File MD5 FAED7E27740270E4184C97018B2C8B36
File SHA-1 080DA776FCE1E3D2F0C5091675A6CD5DC226C05B
File CRC32 3B09F9ED

nintendont setting are default. but it doesn't matter if are they default or not.

 

[pedro702]

in the compatibility list there have someone also post this. so i am not the only one who have this problem:

-> ERROR, game skip ALL cut scenes (only 30 seconds of cut scenes

File MD5 FAED7E27740270E4184C97018B2C8B36
File SHA-1 080DA776FCE1E3D2F0C5091675A6CD5DC226C05B
File CRC32 3B09F9ED

nintendont setting are default. but it doesn't matter if are they default or not.

i always hear people saying they have default settings when they dont just take a picture of it.

 

[Gabberhead]

i dont know if it does matter, but i start my games over usbloader gx. i will take pictures....

--------------------- MERGED ---------------------------

tried also now directly over nintendont loader. same problem.

 

[Gabberhead]

Sorry. I don't have your answer but... Turok Evolution?? Man I had fun with that game but that was when I just had fun with anything and whatever I had. That game is so bad! Bad graphics, odd controls as far as I remember and a glitch fest. XDD I don't think the voice acting was that good either.... Why would you even care for that garbage? XDDDD

because i am nostalgic ^^

 

[pedro702]

because i am nostalgic ^^

well now you must wait to see if fix94 comes out of its retirement and makes any fixes to nintendont, you can make the pal version forced ntsc videomode and force progressive it might work and you basically get the ntsc version.

 

[Gabberhead]

already tried that, but forcing pal480p gives me no picture on my tv. also tried with force ntsc and progressive patch. i also tried 60hz for eu pal gecko codes and then force 480p also same problem. but i think the codes are not working. perhaps a fixed 60hz patch to the iso will work with 480p but i didn't find one. the censored german version i didn't trie, because i do not like censored games ^^

 

[pedro702]

already tried that, but forcing pal480p gives me no picture on my tv. also tried with force ntsc and progressive patch. i also tried 60hz for eu pal gecko codes and then force 480p also same problem. but i think the codes are not working. perhaps a fixed 60hz patch to the iso will work with 480p but i didn't find one. the censored german version i didn't trie, because i do not like censored games ^^

tryed forcing ntsc videomode, enablçe patch 50hz and force progressive aswhell?

 

[Gabberhead]

yes i tried several combinations but i have no luck with turok pal. most games i have the ntsc version and a few pal version in german language. ntsc nearly every game works in 480p. pal version which i have no luck with 480p or 60z are talse of symphonia and turok evolution. i do like playing in progressive mode because the interlaced picture hurts my eyes ^^

 

[dcx6723]

yes i tried several combinations but i have no luck with turok pal. most games i have the ntsc version and a few pal version in german language. ntsc nearly every game works in 480p. pal version which i have no luck with 480p or 60z are talse of symphonia and turok evolution. i do like playing in progressive mode because the interlaced picture hurts my eyes ^^

If you have no picture on TV, push the buttons LIKE A multiple times to skip the selection screens.

Else I recommend you the Wii U version, all PAL titles runs in 480p without issues.

 

[Mikitok]

Its posible remap buttons? I play Metroid Prime 2 and bottons not similar than game cube controller

 

[dcx6723]

Its posible remap buttons? I play Metroid Prime 2 and bottons not similar than game cube controller

On wii classic controller, there is a combination to swap controls and get PS2 controls for games.

 

[Mikitok]

On wii classic controller, there is a combination to swap controls and get PS2 controls for games.

I use wii u gamepad for play games what steps I need for remap buttons?

 

[dcx6723]

I use wii u gamepad for play games what steps I need for remap buttons?

I'm not sure this feature exist for the gamepad, try the select button :

• If you press "-" on your classic controller/wiiu pro controller, it will change the control scheme to be rotated a quarter clockwise or back to the original control scheme

 

[Mikitok]

I'm not sure this feature exist for the gamepad, try the select button :

• If you press "-" on your classic controller/wiiu pro controller, it will change the control scheme to be rotated a quarter clockwise or back to the original control scheme

I try later

 

[NicoBrenChan]

Hello. I'm thinking of buying this controller to play at Nintendont.
I was wondering if anyone has tested any control of this model.
It is for PS2, and has a USB to be used on PS3. Will it be used directly by the receiver's USB, or will I have to
use a PS2 to USB adapter?

 

[Yan3]

at this point, im stuck i have a pal iso of ssx 3 and i verified the md5 hash.
my nintendont is in latest version.
i tried to run it on every set of settings i could on my ntsc wii but cant get it to show an image,
the game is said to be compatible in the compatibility list.
(i have a component cable for my wii, and i tried with and without progressive : on)

so i would need help.

 

[pedro702]

at this point, im stuck i have a pal iso of ssx 3 and i verified the md5 hash.
my nintendont is in latest version.
i tried to run it on every set of settings i could on my ntsc wii but cant get it to show an image,
the game is said to be compatible in the compatibility list.
(i have a component cable for my wii, and i tried with and without progressive : on)

so i would need help.

maybe yyour tv doesnt play pal signals.

some pal games cant be forced to ntsc but try to force videomode to ntsc and turn patchpal50 to on.

if all fails just get the usa version.

 

[Yan3]

maybe yyour tv doesnt play pal signals.

some pal games cant be forced to ntsc but try to force videomode to ntsc and turn patchpal50 to on.

if all fails just get the usa version.

I’ll try