Hello all,
Yesterday night i halped a friend to install arm9loaderhax + luma3ds to and Old 3ds with a 4.5.0 following https://plailect.github.io
Everything went smooth up untill the part where you need to do a backup of your sysnand to nandmin.bin https://plailect.github.io/Guide/2.1.0-ctrtransfer -> Section III part 3. My friend skiped this part not backing up the sysnand, but we continued with the guide, as he had a nand backup from before we started the tutorial (i think this is where our issue lies).
So we continued with https://plailect.github.io/Guide/installing-arm9loaderhax up to the point of Section IV. At this point, since he forgot to make a backup as said before, i told him to just skip that part and inject the FBI to H&S but it didn't work. (He injected FBI to H&S as guide says but the H&S app was still the normal one).
So since we were unable to continue, we decided to use the old nand backup he had, that as i said, was made before we did anything to the 3ds (in other words, not following the guide), and after using that backup as it states in Section IV, as soon as he turns his 3ds up he gets the following error:
An error has ocurred:
An old unsupported FIRM has been detected.
Cppy a firmware.bin in /luma to boot.
We tried several fixes like starting again from the top of https://plailect.github.io/Guide/installing-arm9loaderhax with no success at all, so here i'm, asking you for some help.
Edit: if it helps, we used https://plailect.github.io/Guide/2.1.0-ctrtransfer
Edit 2: 3ds was updated to 11.2.0 while restoring the nand he had as stated in the guide.
Edit 3: If start is hold while prowerng 3ds, it boots into Hourglass 9, if select is hold, it boots into Luma3ds config menu.
Edit 4: the issue is the 3ds being stuck when powered normal with the following message:
An error has ocurred:
An old unsupported FIRM has been detected.
Cppy a firmware.bin in /luma to boot.
SOLVED: following #5
Yesterday night i halped a friend to install arm9loaderhax + luma3ds to and Old 3ds with a 4.5.0 following https://plailect.github.io
Everything went smooth up untill the part where you need to do a backup of your sysnand to nandmin.bin https://plailect.github.io/Guide/2.1.0-ctrtransfer -> Section III part 3. My friend skiped this part not backing up the sysnand, but we continued with the guide, as he had a nand backup from before we started the tutorial (i think this is where our issue lies).
So we continued with https://plailect.github.io/Guide/installing-arm9loaderhax up to the point of Section IV. At this point, since he forgot to make a backup as said before, i told him to just skip that part and inject the FBI to H&S but it didn't work. (He injected FBI to H&S as guide says but the H&S app was still the normal one).
So since we were unable to continue, we decided to use the old nand backup he had, that as i said, was made before we did anything to the 3ds (in other words, not following the guide), and after using that backup as it states in Section IV, as soon as he turns his 3ds up he gets the following error:
An error has ocurred:
An old unsupported FIRM has been detected.
Cppy a firmware.bin in /luma to boot.
We tried several fixes like starting again from the top of https://plailect.github.io/Guide/installing-arm9loaderhax with no success at all, so here i'm, asking you for some help.
Edit: if it helps, we used https://plailect.github.io/Guide/2.1.0-ctrtransfer
Edit 2: 3ds was updated to 11.2.0 while restoring the nand he had as stated in the guide.
Edit 3: If start is hold while prowerng 3ds, it boots into Hourglass 9, if select is hold, it boots into Luma3ds config menu.
Edit 4: the issue is the 3ds being stuck when powered normal with the following message:
An error has ocurred:
An old unsupported FIRM has been detected.
Cppy a firmware.bin in /luma to boot.
SOLVED: following #5
Last edited by Smokerino,