Tutorial
Updated
Improve menuhax boot rate to nearly 100%
Hello guys I found a very useful guide from star_storm (all credits go to him) that works for those who have a 9.2 SysNAND (no matter which emuNAND version), I tested it and it works pretty great (no more black when exiting SSB or system settings), so here is the tutorial taken from Reddit:
1) Download this file:http://www.mediafire.com/download/nmz771n1gb97ak7/Themehax_Installer_offline_v1.2.zip
2) Copy it to your SD card
3) Boot it in HomebrewLauncher
4) Install (make sure you are using themehax manager)
5) Connect to your PC and copy "menuhax_ropbinpayload.bin" from your sd card
6) Install homemenuhax like normal again (with menuhax manager).
7) Reconnect SD to PC and look for the new menuhax payload (the one with a lot of numbers)
8) Copy the name of the file and rename "menuhax_ropbinpayload.bin" from earlier to the new file name
9) Replace the file on your SD card with the renamed payload on your PC.
10) Observe boot rates nearing 100%
EDIT: Thread can be deleted as it has just been posted by star_storm
1) Download this file:http://www.mediafire.com/download/nmz771n1gb97ak7/Themehax_Installer_offline_v1.2.zip
2) Copy it to your SD card
3) Boot it in HomebrewLauncher
4) Install (make sure you are using themehax manager)
5) Connect to your PC and copy "menuhax_ropbinpayload.bin" from your sd card
6) Install homemenuhax like normal again (with menuhax manager).
7) Reconnect SD to PC and look for the new menuhax payload (the one with a lot of numbers)
8) Copy the name of the file and rename "menuhax_ropbinpayload.bin" from earlier to the new file name
9) Replace the file on your SD card with the renamed payload on your PC.
10) Observe boot rates nearing 100%
EDIT: Thread can be deleted as it has just been posted by star_storm
Last edited by mrjoker59,