Crediar releases QuadForce 2.0

[AndehX]

OK I'm about to try something. I'll update in a sec, with results.

Edit: Nevermind. I tried DiscEx v0.9, which seemed to take longer to convert the iso, but the result was the same

 

[florian]

Too bad too bad it's not working in this, in the trashcan this release

 

[8BitWalugi]

It's working a-okay for me. I can get a video when I get home if anyone wants.

 

[funnyguy77]

I put together a channel for F-zero AX if anyone is interested.







http://www.mediafire.com/?k6jtk4lvxu8fpv9



As long as you have the game in sd:\games\GFZJ8P it should start right up

EDIT: ignore this post, i went ahead and updated the channel already and made a new post with new links

 

[LWares87]

DM(L) Booter Channels updated to SVN r30 (supports quadforce).

Download in signature....

 

[VatoLoco]

Got this runnin this morning on postLoader with its DML booter set at 1.x
I've got the older release working on one of my NANDs, but haven't had time to try quadforce 2.0 on emuNAND. Hopefully this version fixes the crackle static sound on the MKGP games when run from NEEK2o.

 

[Fire-WSP]

@funnyguy77 cool Channel, will try it out!
Okay I was testing a bit more today and it is strange. Some have problems with the wavebird... well this morning when I tried the first time everything was fine, no problems at all.
However I played again a few hours ago and there it was. My wavebird acted strange. It must be a problem with the analogue L&R Buttons. The R Button is always triggering and so the controller is acting very weird.
Suggesting to use a wired GC controller is bad, I just have a Wavebird

 

[MassiveRican]

Too bad too bad it's not working in this, in the trashcan this release

Weird it's working fine on my end as well

 

[funnyguy77]

I'm wondering if it simply has something to do with incompatibility between different sd cards... I haven't experienced a single freeze yet. I'm using a micro sd 2gb sandisk.

 

[florian]

I put together a channel for F-zero AX if anyone is interested.







http://www.mediafire.com/?k6jtk4lvxu8fpv9



As long as you have the game in sd:\games\GFZJ8P it should start right up

EDIT: ignore this post, i went ahead and updated the channel already and made a new post with new links

link is dead PM me please or post a new link big thanks

 

[funnyguy77]

Ok, I've updated this channel. Adjusted the volume level, looped it, etc. Additionally, I've added 2 variations. Each wad is 13blocks in size.


F-Zero AX - FZAX v1.wad

http://www.mediafire.com/?9p6e9hdb3x9vva6


F-Zero AX - FZAX v2.wad

http://www.mediafire.com/?okgmkexq0uusb1d



F-Zero AX - FZAX v3.wad

http://www.mediafire.com/?s7i07z1121cqa2v


*sorry for the poor quality screenshots, they look better on the tv

And once again, as long as you have the game in sd:\games\GFZJ8P it should start right up

edit: I've now made the wads REGION-FREE thanks to Huntex for pointing this out

 

[karyuudo]

Okay I'm stumped on this. I've read multiple tutorials out there but I think I must be missing something.

1) I've taken my games (Mario Kart GP 1&2 and Fzero AX) and used DiscEx v0.9 to extract them.
2) I renamed each of the ISO files with separate names
3) I've copied those 3 folders and put them on an sd card into a folder named Games

On my Wii.
I installed d2x cIOS installer version 3.1
Within the app I installed d2x v6 into the appropriate IOS slots
cIOS245 [37]
cIOS246 [38]
cIOS247 [53]
cIOS248 [55]
cIOS249 [56]
cIOS250 [57]
cIOS251 [58]

From Wad Manager 1.7
I installed under IOS249 the following

DIOS MIOS Lite v1.5.wad
DIOSMIOS_2.9.wad
Mario Kart Arc. GP2 - UGP2.wad
Mario Kart Arcade GP - UGP1.wad
quadforce_2.0.wad
I installed DIOS-MIOS Booter
Now, if I try and start any of the games it shuts the system off.
I also noticed that it was saying that DIOS MIOS Lite was not installed.
Troubleshooting I've done:
I realised that if you install quadforce after installing DIOS MIOS Lite, it would remove it. So I installed DIOS MIOS Lite again and it came up that it was installed. However, if you tried to launch any of the games, it would bring it to a gamecube loading screen stating it was launching the app

So obviously there's something I'm either not understanding, or I've missed a step.
Could someone kindly please assist me? Thank you in advance.

Edit #1: I realised after reading what I was installing that DIOS MIOS Lite v1.5.wad was an older outdated version. So I found DIOSMIOSLite_2.9.wad and installed that again.

Now it boots to DIOS MIOS screen with a Fatal error apploader size is zero!

 

[florian]

with this wad the game is working or not ?

 

[funnyguy77]

Okay I'm stumped on this. I've read multiple tutorials out there but I think I must be missing something.

1) I've taken my games (Mario Kart GP 1&2 and Fzero AX) and used DiscEx v0.9 to extract them.
2) I renamed each of the ISO files with separate names
3) I've copied those 3 folders and put them on an sd card into a folder named Games

On my Wii.
I installed d2x cIOS installer version 3.1
Within the app I installed d2x v6 into the appropriate IOS slots
cIOS245 [37]
cIOS246 [38]
cIOS247 [53]
cIOS248 [55]
cIOS249 [56]
cIOS250 [57]
cIOS251 [58]

From Wad Manager 1.7
I installed under IOS249 the following

DIOS MIOS Lite v1.5.wad
DIOSMIOS_2.9.wad
Mario Kart Arc. GP2 - UGP2.wad
Mario Kart Arcade GP - UGP1.wad
quadforce_2.0.wad
I installed DIOS-MIOS Booter
Now, if I try and start any of the games it shuts the system off.
I also noticed that it was saying that DIOS MIOS Lite was not installed.
Troubleshooting I've done:
I realised that if you install quadforce after installing DIOS MIOS Lite, it would remove it. So I installed DIOS MIOS Lite again and it came up that it was installed. However, if you tried to launch any of the games, it would bring it to a gamecube loading screen stating it was launching the app. So obviously there's something I'm either not understanding, or I've missed a step.
Could someone kindly please assist me? Thank you in advance.

"and used DiscEx v0.9 to extract them." You don't need to EXTRACT anything. just run "discex.exe -c fzeroax" and it will convert and compress and create the "GFZJ8P" folder. then place it on your sd card in the GAMES folder so it looks like this, "sd:/games/GFZJ8P"

" I renamed each of the ISO files with separate names" You shouldn't have to rename anything at all. just copy the folder that discex creates into the games folder on the sd.


"Within the app I installed d2x v6 into the appropriate IOS slots" I'm not sure this even matters considering the fact that quadforce only uses the MIOS slot... but d2x-v6 is very old... try v9.


Also try one of the wads I created, they use diosmios booter r30.

 

[AndehX]

in regards to the freezing issue, I tried updating all my cIOS and IOS's, but this also has had no effect.

 

[karyuudo]

"and used DiscEx v0.9 to extract them." You don't need to EXTRACT anything. just run "discex.exe -c fzeroax" and it will convert and compress and create the "GFZJ8P" folder. then place it on your sd card in the GAMES folder so it looks like this, "sd:/games/GFZJ8P"

" I renamed each of the ISO files with separate names" You shouldn't have to rename anything at all. just copy the folder that discex creates into the games folder on the sd.

Basically when I meant that I extracted the games... I dragged each BIN file onto discEX and it would do the conversion. I would then use the Wii ISO renamer to give each game a proper name.

"Within the app I installed d2x v6 into the appropriate IOS slots" I'm not sure this even matters considering the fact that quadforce only uses the MIOS slot... but d2x-v6 is very old... try v9.

Alright will do!

Also try one of the wads I created, they use diosmios booter r30.

[/quote]

Cheers! I'll try it out also!

Basically when I meant that I extracted the games... I dragged each BIN file onto discEX and it would do the conversion. I would then use the Wii ISO renamer to give each game a proper name.



Alright will do!

Cheers! I'll try it out also![


Okay I'm getting somewhere. I actually took some other suggestions and formatted a 2GB SD card as FAT 64kb file system and now both F-Zero AX and Mario Kart GP2 load. However, the controls don't seem to work as I have a Wave Bird controller.

 

[funnyguy77]

Cheers! I'll try it out also!

"Okay I'm getting somewhere. I actually took some other suggestions and formatted a 2GB SD card as FAT 64kb file system and now both F-Zero AX and Mario Kart GP2 load. However, the controls don't seem to work as I have a Wave Bird controller.[/quote]"



Wavebird works fine, you have to have the wavebird turned on BEFORE your load the game. Otherwise quadforce won't detect it.

 

[AndehX]

Ok can the people who have AX working, post what type of SD card they have, and what size it is? This is doing my head in now. I want to donate to this project, but not until the game works for me.

 

[Huntex]

Don't really have informations about my SD card since the sticker is removed. All I can know is that it's a FAT 483Mo SD.

 

[karyuudo]

"Okay I'm getting somewhere. I actually took some other suggestions and formatted a 2GB SD card as FAT 64kb file system and now both F-Zero AX and Mario Kart GP2 load. However, the controls don't seem to work as I have a Wave Bird controller.

"



Wavebird works fine, you have to have the wavebird turned on BEFORE your load the game. Otherwise quadforce won't detect it.[/quote]

Still doesn't work. I have the Wavebird plugged into port 1. Also is Mario Kart GP2 not supposed to have any sound? As I'm watching through the demo the only thing that i get is the announcers voice at one small part.