Hacking a9lh 3ds won't boot "arm9loaderhax.bin"

[TheGreek Boy]

i need some help , my 3ds xl won't boot "arm9loaderhax.bin" just loads the mini cfw from the nand
i'm on 11.1 sysNAND can't access installed cias. i have NAND backup, what can i do?

 

[Davidosky99]

i need some help , my 3ds xl won't boot "arm9loaderhax.bin" just loads the mini cfw from the nand
i'm on 11.1 sysNAND can't access installed cias. i have NAND backup, what can i do?

run safea9lhinstaller from homebrew launcher and reinstall a9lh using plailect's guide steps
https://github.com/Plailect/Guide/wiki/Updating-arm9loaderhax

 

[TheGreek Boy]

run safea9lhinstaller from homebrew launcher and reinstall a9lh using plailect's guide steps
https://github.com/Plailect/Guide/wiki/Updating-arm9loaderhax

i can't boot "arm9loaderhax.bin"

 

[TheGreek Boy]

run safea9lhinstaller from homebrew launcher and reinstall a9lh using plailect's guide steps
https://github.com/Plailect/Guide/wiki/Updating-arm9loaderhax

i can't boot "arm9loaderhax.bin"

 

[Davidosky99]

i can't boot "arm9loaderhax.bin"

use the homebrew launcher to run safea9lhinstaller, and follow the steps regarding safea9lhinstaller

 

[TheGreek Boy]

i can't boot safea9lhinstaller from homebrew launcher

 

[TheGreek Boy]

what can i do guys?

 

[TheGreek Boy]

??

--------------------- MERGED ---------------------------

?

 

[Aletron9000]

??

--------------------- MERGED ---------------------------

?

maybe try another entrypoint

 

[mashers]

What A9LH payload did you install?

 

[TheGreek Boy]

What A9LH payload did you install?

i can't remember

 

[mashers]

i can't remember

Well there aren't many choices. If it's got mini CFW then it's probably shadowNAND. If you check the GitHub page here, you'll see that ShadowNAND boots /homebrew/3ds/boot.bin. So perhaps you need to put the safea9lhinstaller payload there.

https://github.com/RShadowhand/ShadowNAND

 

[GerbilSoft]

i need some help , my 3ds xl won't boot "arm9loaderhax.bin" just loads the mini cfw from the nand
i'm on 11.1 sysNAND can't access installed cias. i have NAND backup, what can i do?

If you can't "access installed cias", that means you don't actually have a mini CFW in NAND; you upgraded while using a CFW that doesn't have FIRM protection.

EDIT: For clarification, both ShadowNAND and Aurora Wright's A9LH Mini CFW have signature check patches and FIRM write protection.

 

[TheGreek Boy]

Well there aren't many choices. If it's got mini CFW then it's probably shadowNAND. If you check the GitHub page here, you'll see that ShadowNAND boots /homebrew/3ds/boot.bin. So perhaps you need to put the safea9lhinstaller payload there.

https://github.com/RShadowhand/ShadowNAND

no no it was the payload that boot without sd card, but my 3ds was working perfect about 3 months now

 

[mashers]

no no it was the payload that boot without sd card, but my 3ds was working perfect about 3 months now

Yes, and ShadowNAND is one of those payloads which boots without SD card. So you need to try putting the a9lh payload in the location where ShadowNAND expects it to be.

 

[TheGreek Boy]

Yes, and ShadowNAND is one of those payloads which boots without SD card. So you need to try putting the a9lh payload in the location where ShadowNAND expects it to be.

no i was using that payload

 

[Thaulos]

Check the guide you used and make sure the file is on the sd card
and the sd is in the right format

 

[mashers]

no i was using that payload

I thought you said you didn't know which payload it was? Well, if you're really using that payload then /arm9loaderhax.bin should work. If it doesn't boot that, then something is wrong with your A9LH in NAND. Or there's a fault with your SD card.

 

[TheGreek Boy]

I thought you said you didn't know which payload it was? Well, if you're really using that payload then /arm9loaderhax.bin should work. If it doesn't boot that, then something is wrong with your A9LH in NAND. Or there's a fault with your SD card.

i tried my 2d's sd card but same problem

 

[mashers]

i tried my 2d's sd card but same problem

Then the problem must be your A9LH installation in NAND.

 

[osaka35]

no no it was the payload that boot without sd card, but my 3ds was working perfect about 3 months now

What happened before the freak out? Did you update anything? run anything new? add/delete anything to the sd card? any errors or problems occur around the same time? Or was it just running smoothly, you turned it off normally, then when you turned it on next, your stuff didn't work?