I just bought this new micro-sd card: https://www.walmart.com/ip/Samsung-...38790&wl11=online&wl12=44875081&wl13=&veh=sem
I first used a different micro sd adapter that was from Lexar but then my dumbass decided to go with the new one instead. When I did the whole formatting process for 128gb cards, I put it into the Samsung adapter. I insert it into my system but I didn't hear any click when inserting. When I turned it on, Luma3DS settings popped up. I don't know why I did but I fricking turned off the console. When I try turning it on again, blue light shows for a second then off. Now I try to use the old micro sd again in hope that everything is fine. And then............it fucking gets stuck. I get some tweezers try to pull it out and finally came out after raging. Then I put the old sd card adapter with my old micro sd card in there and the system STILL SHOWS THE BLUE LIGHT THEN TURNS OFF. At this point I'm panicking. Then I take out sd card and turn on console. Boots perfectly. After a while of inserting and reinserting sd card, the system starts to boot with it but still doesn't detect sd card. Now I don't think that my sd card slot broke. I think I corrupted something with Luma/A9LH and now I'm thinking of formatting my 3ds. Someone please give me more suggestions. I think formatting is a good first option since nothing else is working and my only other option is to tear down my 3DS and replace sd card tray. Also, if I format, will my 3ds brick or anything corrupt since I have Luma/A9LH installed on sysNand? What saves can I back up as well?
EDIT: When system boots with SD card inserted, now it actually goes into home menu but it says "Could not detect an SD Card. The software on the SD Card could not be displayed."
I first used a different micro sd adapter that was from Lexar but then my dumbass decided to go with the new one instead. When I did the whole formatting process for 128gb cards, I put it into the Samsung adapter. I insert it into my system but I didn't hear any click when inserting. When I turned it on, Luma3DS settings popped up. I don't know why I did but I fricking turned off the console. When I try turning it on again, blue light shows for a second then off. Now I try to use the old micro sd again in hope that everything is fine. And then............it fucking gets stuck. I get some tweezers try to pull it out and finally came out after raging. Then I put the old sd card adapter with my old micro sd card in there and the system STILL SHOWS THE BLUE LIGHT THEN TURNS OFF. At this point I'm panicking. Then I take out sd card and turn on console. Boots perfectly. After a while of inserting and reinserting sd card, the system starts to boot with it but still doesn't detect sd card. Now I don't think that my sd card slot broke. I think I corrupted something with Luma/A9LH and now I'm thinking of formatting my 3ds. Someone please give me more suggestions. I think formatting is a good first option since nothing else is working and my only other option is to tear down my 3DS and replace sd card tray. Also, if I format, will my 3ds brick or anything corrupt since I have Luma/A9LH installed on sysNand? What saves can I back up as well?
EDIT: When system boots with SD card inserted, now it actually goes into home menu but it says "Could not detect an SD Card. The software on the SD Card could not be displayed."
Last edited by atin675,