Those are very old. You aren’t using them at all and can just leave them there. Just add the new fusee.bin from the Atmosphere release page.I will remove the 2 bin file change to fuse.bin latest atmosphere?
Those are very old. You aren’t using them at all and can just leave them there. Just add the new fusee.bin from the Atmosphere release page.I will remove the 2 bin file change to fuse.bin latest atmosphere?
I did all your advice same result looking for sigpatched, I even tried to download the games in goodleafThose are very old. You aren’t using them at all and can just leave them there. Just add the new fusee.bin from the Atmosphere release page.
I did all your advice same result looking for sigpatched, I even tried to download the games in goodleaf
[config]
autoboot=0
autoboot_list=0
bootwait=3
backlight=100
autohosoff=0
autonogc=1
updater2p=0
bootprotect=0
[Atmosphere CFW]
payload=bootloader/payloads/fusee.bin
icon=bootloader/res/icon_payload.bmp
[Stock SysNAND]
fss0=atmosphere/package3
stock=1
emummc_force_disable=1
icon=bootloader/res/icon_switch.bmp
[exosphere]
debugmode=1
debugmode_user=0
disable_user_exception_handlers=0
enable_user_pmu_access=0
blank_prodinfo_sysmmc=0
blank_prodinfo_emummc=1
allow_writing_to_cal_sysmmc=0
log_port=0
log_baud_rate=115200
log_inverted=0
Block Nintendo Servers
127.0.0.1 *nintendo.*
127.0.0.1 *nintendo-europe.com
127.0.0.1 *nintendoswitch.*
95.216.149.205 *conntest.nintendowifi.net
95.216.149.205 *ctest.cdn.nintendo.net
same result sir Im thinking to rejailbreak again from the very start my switch but the problem is Im not the one jailbreak someone that I payed beforeLet’s do this:
- Move/rename your /atmosphere directory to /atmosphere.bk
- Move/rename your /bootloader directory to /bootloader.bk
- Download and unzip to the root of yiur SDCard the latest Hekate.x.x.x.zip from the releases section of the official GitHub: https://github.com/CTCaer/hekate/release
- Download and unzip to the root of your SDCard the latest Atmosphere.x.x.x.zip from the releases section of the official GitHub: https://github.com/Atmosphere-NX/Atmosphere/releases
- Download fusee.bin from https://github.com/Atmosphere-NX/Atmosphere/releases and place it in /bootloader/payloads/
- Sigpatches (GBATemp) grab sigpatches from here and unzip them at the root of your SDCard.
- create a new file called ‘bootloader/hekate_ipl.ini and place the following inside of it:
If you do not have a /exosphere.ini file at the top level of your SDCard, create one and place this inside (make sure it ends in .ini and not .ini.txt)
if you do not have an /atmosphere/hosts directory, create one.
if you do not have an /atmosphere/hosts/default.txt file create one and out the following inside it:
once all this is done, reboot your switch and select Atmosphere CFW
We essentially just did redo the entire hacking process. If you went through everything I listed then you are not running on anything that was there before. This is extremely strange.same result sir Im thinking to rejailbreak again from the very start my switch but the problem is Im not the one jailbreak someone that I payed before
this is what my SD card look like?maybe I did something wrong on your instructionWe essentially just did redo the entire hacking process. If you went through everything I listed then you are not running on anything that was there before. This is extremely strange.
e: the only thing we did not replace was your emunand. There is nothing else left to replace after that.
this is what my SD card look like?maybe I did something wrong on your instruction
thank you @binkinator for helping me on my switch issue,I hope other can share any ideasIt looks absolutely perfect. Thinking about what else we can try…
anyone else have any ideas?
Since you posted how to migrate to an upgraded CFW, I started from my SD card and followed step by step the guide you told me. No difference, same old problems
Error 2002-4517 (0x23a02)
Module file system (2)
Description NCA invalid (it could be for a newer firmware or you do not have enabled sigpatches) (4517)
Could anyone tell me how to solve?
Thank you
Do you have a whole bunch of games and saves on this card? If you don’t have a bunch of stuff already on there, we could just start over with a new Emunand and take it from the top. You’ve done everything else included w/ hacking a switch so it’s not much more to add.thank you @binkinator for helping me on my switch issue,I hope other can share any ideas
I willing to delete the games since most of them I already finished, will to take other way just to solve the case of my switch sir, just guide me sir heheDo you have a whole bunch of games and saves on this card? If you don’t have a bunch of stuff already on there, we could just start over with a new Emunand and take it from the top. You’ve done everything else included w/ hacking a switch so it’s not much more to
We’ll, since we’re out of sane option, let’s go nuclear.I willing to delete the games since most of them I already finished, will to take other way just to solve the case of my switch sir, just guide me sir hehe
What firmware is your console on?Sorry, I fixed the bootloader sigpatch at launch issues. Now I'm running into issue when installing over nusbloader and tinwoo. Are my sigpatches wrong?
Where can I download Rufus and h2testwWe’ll, since we’re out of sane option, let’s go nuclear.
Please download rufus and h2testw onto you PC.
Before we wipe everything please confirm if you are on Erista (V1) or Mariko (V2)...I think I know but don’t want to leave anything to chance.
Where can I download Rufus and h2testw
I think this is Erista(V1) Im not sure I just saw it on All in One
I'll try it tom sir (timediff),I hope I can get it right,Yes, that’s a v1. :-)
Copy your /backup folder to your PC before we do anything else.
here they are:
https://3ds.hacks.guide/h2testw-(windows).html
https://rufus.ie/en/
Once you finish the test and confirm your SDCard is good, format your card as FAT32 w/ 32k block size.
Then start reading this guide:
https://rentry.co/SwitchHackingIsEasy
The first three sections are worth a read and will help troubleshooting in the future.
Section 4 is where we’ll make a new Emunand by copying your Sysnand.
Create/Restore a NAND backup
When you get to the CFW part you will want the section called:
Set up Atmosphere with EmuNAND on Erista (Unpatched)
No worries. Just start at the top, 1, 2, 3…3 is where the action starts.I'll try it tom sir (timediff),I hope I can get it right,
may I ask something?where will I start here?I mean start of hacking process/jailbreak?
Best I can do is a comic strip with Swahili sub-titles.is there a video of how to run - doom 1 -2 classic running on nintendo switch offline
You download the games (from the eShop duh), you install them, you play them, no magic needed.is there a video of how to run - doom 1 -2 classic running on nintendo switch offline