Hacking SWITCH NOOB PARADISE - Ask questions here

BigOnYa · Feb 27, 2021

gonefishing1975 said:
Retroarch and some others Error Code 2168-0002 (0x4a8) others 2001-0000. Pnes and Psnes are the only two working

I personally never cared for deepsea, or any autoinstaller bs, I'd rather know what I'm installing myself...
- Format SD card to FAT32
- Fresh install (meaning delete these same folders on sd card, and then copy/paste these new folders to sd) of Atmosphere files on SD card. - https://github.com/Atmosphere-NX/Atmosphere/releases
- Get and put Sigpatches, according to your FW and Atmosphere version, in "atmosphere" folder - https://github.com/ITotalJustice/patches/releases Unzip files and copy to "sd:\ atmosphere" folder
- Boot into Hekate menu, select "CFW' or/ "Payloads", then select "Fusee-Primary"
When launching homebrew/emulators:
You should launch in non-applet mode. Hold down the top R trigger and press A on any game title on main menu while holding down the R until homebrew screen shows, then launch homebrew title.

gonefishing1975 · Feb 27, 2021

BigOnYa said:
I personally never cared for deepsea, or any autoinstaller bs, I'd rather know what I'm installing myself...
1 - Format SD card to FAT32
2 - Fresh install (meaning delete these same folders on sd card, and then copy/paste these new folders to sd) of Atmosphere files on SD card. - https://github.com/Atmosphere-NX/Atmosphere/releases
3 - Get and put Sigpatches, according to your FW and Atmosphere version, in "atmosphere" folder - https://github.com/ITotalJustice/patches/releases Unzip files and copy to "sd:\ atmosphere" folder
4 - Boot into Hekate menu, select "CFW' or/ "Payloads", then select "Fusee-Primary"
Good Luck and Have fun!

PNes, PSnes. PSP and MGBA work but Retroarch just crashes the system. I open albums then Retroarch black screen for a few seconds then th error message I have to reboot

BigOnYa · Feb 27, 2021

gonefishing1975 said:
PNes and PSnes work but Retroarch just crashes the system. I open albums then Retroarch black screen for a few seconds then th error message I have to reboot

When launching homebrew/emulators:
You should launch in non-applet mode. Hold down the top R trigger and press A on any game title on main menu while holding down the R until homebrew screen shows, then launch homebrew title.

gonefishing1975 · Feb 27, 2021

BigOnYa said:
When launching homebrew/emulators:
You should launch in non-applet mode. Hold down the top R trigger and press A on any game title on main menu while holding down the R until homebrew screen shows, then launch homebrew title.

Oh I have no game in the switch maybe that's the issue? I was just going into albums

BigOnYa · Feb 27, 2021

You can launch non-applet mode with any game title that way, It doesn't matter which game, it won't actually load that game....it will goto homebrew menu using all of switchs RAM access, which retroarch, and other emulators/homebrew require!
Once you get Retro going, you can use all those emulators inside retro, with full RAM access which means they all should run better than before! Good Luck and Have Fun! :grog:

gonefishing1975 · Feb 27, 2021

BigOnYa said:
When launching homebrew/emulators:
You should launch in non-applet mode. Hold down the top R trigger and press A on any game title on main menu while holding down the R until homebrew screen shows, then launch homebrew title.

Managed to install a game press "R" and "A" boom Retroarch works thanks

BigOnYa · Feb 27, 2021

gonefishing1975 said:
Managed to install a game press "R" and "A" boom Retroarch works thanks

Glad you got it working, enjoy and have fun, because fishing weather is around the corner! Game on, and Fish on!

Ashir · Feb 27, 2021

gonefishing1975 said:
Retroarch and some others Error Code 2168-0002 (0x4a8) others 2001-0000. Pnes and Psnes are the only two working

I used to have those kind of errors with RetroArch and I fix them by booting with Fusee-primary and updating the sigpatches for fusee

BigOnYa · Feb 27, 2021

Ashir said:
I used to have those kind of errors with RetroArch and I fix them by booting with Fusee-primary and updating the sigpatches for fusee

He was not starting it in Non-applet mode, that was his problem turns out...but yes what you mentioned helps too....

Ashir · Feb 27, 2021

BigOnYa said:
He was not starting it in Non-applet mode, that was his problem turns out...but yes what you mentioned helps too....

In my case, I did start with full memory for RetroArch and still got those nasty errors, until I start from Fusee with updated sigpatches... weird.

bloodpancake · Feb 27, 2021

So I'm having a problem formatting my SD card to FAT32. I get a "volume is too big for FAT32" error. Using a 200GB SD Card. Any tips?

ZeDing0 · Feb 27, 2021

i updated super smash bros ultimate using tinfoil but right when it was done atmosphere crashed i tried booting it again with fusee primairy but then i keep getting this error (fetal error (nx boot) failed to mount emummc from sd card partition) can anyone please help me?

Draxzelex · Feb 27, 2021

bloodpancake said:
So I'm having a problem formatting my SD card to FAT32. I get a "volume is too big for FAT32" error. Using a 200GB SD Card. Any tips?

What are you using to format your SD card?

bloodpancake · Feb 27, 2021

Draxzelex said:
What are you using to format your SD card?

I tried diskpart and just the regular old command prompt in windows 10. The error messages are slightly different, both report that the volume is too large, which shouldn't be the case.

Draxzelex · Feb 27, 2021

bloodpancake said:
I tried diskpart and just the regular old command prompt in windows 10. The error messages are slightly different, both report that the volume is too large, which shouldn't be the case.

I've always recommended GUIFormat and it has never given anyone issues as far as I know so it may worth a shot.

bloodpancake · Feb 27, 2021

Draxzelex said:
I've always recommended GUIFormat and it has never given anyone issues as far as I know so it may worth a shot.

Alright thanks! I'll give it a try.

ZeDing0 · Feb 27, 2021

please?

Draxzelex · Feb 27, 2021

bloodpancake said:
Alright thanks! I'll give it a try.

No problem.

jkirk · Feb 27, 2021

Hey Guys, I am trying to install Tinfoil on a fresh emummc, however, when I hit the tinfoil installer (NRO), the icon on my home menu only shows a loading wheel and no software is installed. I tried using the NSP with awoo installer and Goldleaf and it says I am having issues with my sigpatches, but as far as I know they are up to date (using aio updater). any suggestions? thanks!

Draxzelex · Feb 27, 2021

jkirk said:
Hey Guys, I am trying to install Tinfoil on a fresh emummc, however, when I hit the tinfoil installer, the icon on my home menu only shows a loading wheel and no software is installed. I tried using the NSP with awoo installer and Goldleaf and it says I am having issues with my sigpatches, but as far as I know they are up to date (using aio updater). any suggestions? thanks!

Don't use the updater application. In fact, its generally not a good idea to use an updater application for anything. Manually updating anything is always better. Grab the latest patches from here

Hacking SWITCH NOOB PARADISE - Ask questions here

Has A Very Big

Well-Known Member

Has A Very Big

Well-Known Member

Has A Very Big

Well-Known Member

Has A Very Big

Member

Has A Very Big

Member

Active Member

Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads

Popular threads in this forum