1. ZeDing0

    ZeDing0 Member
    Newcomer

    Joined:
    Feb 27, 2021
    Messages:
    10
    Country:
    Netherlands
    you need to update your sig patches i had this problem too a while ago

    — Posts automatically merged - Please don't double post! —

    guys i updated smbu via tinfoil but right when it was done atmosphere crashed and my console crashed too and then i treid to boot with fusee primairy but it gives me this error (fetal error (nx boot) failed to mount emummc from sd card partition) my sd card isent corrupted and my switches sd reader pins are fine too does anyone know what the problem is?
     
  2. jkirk

    jkirk Member
    Newcomer

    Joined:
    Feb 20, 2021
    Messages:
    41
    Country:
    Canada
    Thanks Drax, Since its a fresh install I didnt realize I had to update the hekate sig patches, not the fusee ones. looks like tinfoil is going. Thanks! However now its telling me I should boot from fusee-primary.bin to boot to atmosphere so I have to figure out how to do that again any suggestions? lol

    UPDATE! I think I was able to load from fusee primary bin, I moved it into my bootloader payloads folder and it came up, I think thats all I needed... let me know if I messed it up lol
     
    Last edited by jkirk, Feb 27, 2021
  3. ZeDing0
    This message by ZeDing0 has been removed from public view by Joe88, Feb 28, 2021, Reason: Please do not thread bump..
    Feb 27, 2021
  4. Draxzelex

    Draxzelex GBAtemp Legend
    Member

    Joined:
    Aug 6, 2017
    Messages:
    14,618
    Country:
    United States
    Personally I would recommend just using TinWoo Installer. It supports all payloads and is arguably easier to use.
     
    jkirk likes this.
  5. gonefishing1975

    gonefishing1975 GBAtemp Regular
    Member

    Joined:
    Jan 23, 2020
    Messages:
    187
    Country:
    Canada
    Hey Guys

    I was wondering if anyone knows where to buy a mod chip for the switch lite? I searched all over nobody seems to have them. Also with the mod chip if I can find one does it work for all switch lites?
     
  6. OCHI33

    OCHI33 Newbie
    Newcomer

    Joined:
    Feb 28, 2021
    Messages:
    1
    Country:
    Romania
    Hey guys, one question please
    I did upgrade OFW to 11.01 and saw that latest SX OS doesn't work.
    So I did find a tutorial to install Atmosphere and used ChoixDuJour to write 11.00 firmware (without burning fuse option). Now I can still play using SXOS 3.10. Going online is not important for me, I am just happy to play offline.

    I don't have Emunand set up

    Anything I should be aware of if I will further need to upgrade? I don't really understand how the fuses burning works.
    Thanks a lot
     
    Last edited by OCHI33, Feb 28, 2021
  7. ZeDing0

    ZeDing0 Member
    Newcomer

    Joined:
    Feb 27, 2021
    Messages:
    10
    Country:
    Netherlands
    CAN ANYONE HELP ME
     
  8. ngoctung91

    ngoctung91 Member
    Newcomer

    Joined:
    Sep 24, 2018
    Messages:
    12
    Country:
    Vietnam
    When I try to restore my save data (Stardew Vally) by JKSV then I get the error message "Error: Not enough free space to copy sdmc:/JKSV......" The save is ok, I have like 20 free GB so someone please help me :(
     
  9. Serah

    Serah Newbie
    Newcomer

    Joined:
    Sep 1, 2020
    Messages:
    8
    Country:
    Malaysia
    Hey guys,
    I wanna update atmosphere and my switch fw and i was wondering if i updated it, do i have to replay all the games??? And is there anything do i need to be aware of???
    Thanks in advance
     
  10. Draxzelex

    Draxzelex GBAtemp Legend
    Member

    Joined:
    Aug 6, 2017
    Messages:
    14,618
    Country:
    United States
    Maybe try this forum's trading section or eBay but its not really recommended to buy the modchip because not only is it hard to find but the company that makes them may no longer be supporting the CFW used by those chips. You will have better luck finding an unpatched console which is more useful in the long run.

    ChoiDujour doesn't support firmware 11.0. The highest firmware it supports is 6.2. It is clearly stated here

    Is that 20 GB of free space on your SD card or internal memory?

    Replay your games? How would a console update make you replay your games?
     
  11. DMcGinnis

    DMcGinnis Member
    Newcomer

    Joined:
    Feb 21, 2021
    Messages:
    22
    Country:
    Canada
    My .bin files got set to open with adobe somehow and now they wont work at all. Anybody have a fix for this?
     
  12. ngoctung91

    ngoctung91 Member
    Newcomer

    Joined:
    Sep 24, 2018
    Messages:
    12
    Country:
    Vietnam
    Both
     
  13. Draxzelex

    Draxzelex GBAtemp Legend
    Member

    Joined:
    Aug 6, 2017
    Messages:
    14,618
    Country:
    United States
    As in your payload files on your computer do not work when being launched?

    So you're saying you have 20 GB of free memory within your internal memory? Also, have you tried restoring your save data with another homebrew application?
     
  14. DMcGinnis

    DMcGinnis Member
    Newcomer

    Joined:
    Feb 21, 2021
    Messages:
    22
    Country:
    Canada
    N
     
  15. DMcGinnis

    DMcGinnis Member
    Newcomer

    Joined:
    Feb 21, 2021
    Messages:
    22
    Country:
    Canada
    they sure dont. Used to work perfect and now the computer wants to use them with adobe and cant find how to change it.
     
  16. ngoctung91

    ngoctung91 Member
    Newcomer

    Joined:
    Sep 24, 2018
    Messages:
    12
    Country:
    Vietnam
    Yeah, I don't know why but then I remodded the save. This time JKSV still popped that message but the save worked. I don't really understand.
    Btw, other hb application such as checkpoint, edizon... Didn't work.
     
  17. Draxzelex

    Draxzelex GBAtemp Legend
    Member

    Joined:
    Aug 6, 2017
    Messages:
    14,618
    Country:
    United States
    Well how do you send your payload .bin files primarily?
     
  18. DMcGinnis

    DMcGinnis Member
    Newcomer

    Joined:
    Feb 21, 2021
    Messages:
    22
    Country:
    Canada
    Initially used my computer to do it every time but got a dongle recently so just using that.
     
  19. bloodpancake

    bloodpancake Member
    Newcomer

    Joined:
    Feb 26, 2021
    Messages:
    23
    Country:
    Canada
    Alright so I (finally) finished doing all of my NAND backups, and created an emuMMC. When I click launch in Hekate I picked CFW (emuMMC) and a few splash loading screens display. After a few seconds I get an error saying:

    Panic occurred while running Atmosphere.
    Title ID: 010041544D530000
    Error: std: :abort (0xFFE)
    Report saved to /atmosphere/fatal_errors/report_086f63c4.bin
    Press power to continue.

    I am assuming I don't have the correct atmosphere files? I used the guide at https://switch.homebrew.guide/index.html and used the SDSetup website to get the files for my SD card.

    *edit*

    Currently running the archive bit fixer as it has shown to help a few other people. Also I am using FAT32. Will report back when it's done.
     
    Last edited by bloodpancake, Feb 28, 2021
  20. Draxzelex

    Draxzelex GBAtemp Legend
    Member

    Joined:
    Aug 6, 2017
    Messages:
    14,618
    Country:
    United States
    Sorry if I wasn't specific earlier. What I meant was what program do you use on your computer to send payloads?

    What is the error code? That can help diagnose the issue as well.
     
  21. bloodpancake

    bloodpancake Member
    Newcomer

    Joined:
    Feb 26, 2021
    Messages:
    23
    Country:
    Canada
    What I posted was all that was shown. Would the error code be in report_086f63c4.bin somewhere? Do I just open that file with a text editor?

    Archive bit fixer is still running so I will look into that when it's finished. I think it is going to take quite a while to complete.
     
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - questions, PARADISE, SWITCH