That's what I am saying, I know that my fuses count is higher than the FW I am running. But Hekate 4.6 is supposed to FIX sleep mode for consoles whose fuse count is higher than required. Yet I still cannot wake it up from sleep mode.
That's what I am saying, I know that my fuses count is higher than the FW I am running. But Hekate 4.6 is supposed to FIX sleep mode for consoles whose fuse count is higher than required. Yet I still cannot wake it up from sleep mode.
If you manually put it to sleep pressing the power button once, does it freezes? Mine does not do that. Only if it goes automatically into sleep mode.
Also, I read that it happens when you let it sleep for more than 2 minutes, less than that it's fine. Also try with ReiNX so we can shed more light on the matter.
I always use the menu to enter sleep mode, not the power button. But I just tested it, and the same thing happens. My switch goes to a black screen, however I cannot wake it up. I'm also somewhat sure that it crashes, because if it was just in sleep mode, I don't think AutoRCM would kick in, which is what it happens. Also, like I said, I've tried with ReiNX, and it crashes. And I can now confirm that the same thing happens with Atmosphere. This is so bloody frustrating:/
yup, totally different from my issue
Mine does not crash but just freezes, as I have to press the power button for 10 seconds to turn it off then power it on again to enter RCM mode.
I will try again later without modules and extra stuff just to see how it goes. I advice you do the same, clean sdcard with just libsys_lp0.bso and the payload for ReiNX.
As I said before, I think the culprit is a sys module.
Last edited by natkoden,
Ok, so, after cleaning the sdcard, downloading everything again and making sure I don't include any extra stuff I was able to fix my problem. So it's either sysnetcheat or any other crap that Kosmos includes in the package.
I suggest making a clean install with atmosphere.
Are you sure you copied the files cleanly for your CFW ? You need to make sure that you are not using some old remnant files from previous CFW "installation" on your SD card.
For example, which CFW pack are you using ? Kosmos ? Atmosphere ?
Which version of Hekate ? 4.6 or 4.6 svc ? Are you sure you have the lp0 library (libsys_lp0.bso) ?
I had the problems with kosmos and not ReiNX, until I decided to format the card and start from scratch downloading atmosphere 0.8.3 and configuring things myself. Works perfectly fine now.
Don't use kosmos, it's crap.
Both of my Sd card setups contain outdated CFW files, I'll admit that much. I know however, that my fate32 card is a clean install using Kosmos and a manually added ReinNX. And the problem never existed before I accidently blew my fuses while upgrading my clean Nand to 6.2, so I seriously doubt it is a CFW issue, especially considering it happens with 2 different CFW, on 2 different Sd Cards.
I also know that I do indeed have the sleep library and I an now also certain I am using the latest version of it. The 4.6 svc version of Hekate you speak of interests me though. What does it do differently than the regular 4.6? That just might be the solution to my problem (I hope!)
you're so lazy, dude
try stuff, download everything again, start from scratch, update stuff
also when you boot hekate, does it say that sleep library is missing? it's on the bottom of the screen in red letters
Alright look, I could keep listing my reasons for why I I'm certain your solution just will not work for me. We are NOT having the same issue, and you even said so yourself. But with that out of the way, I'll save us both some time and try your suggestion for the heck of it. I'll update this in a little while.
Also, for the record, I am not a newb at this sort of thing. I know the sleep library is there, I've seen the message you are talking about before and the message isn't displayed.
No one said you're a noob,
Nice to know the message is not displayed so that's out of the way. People can't help you if you don't tell us more about the subject. We are not clairvoyants.
Just try with atmosphere 0.8.3 and nothing else.
Alright, so I've deleted everything from the Sd Card, pasted in the newest version of Kosmos and stripped it of just about everything HomeBrew related. Now, the darn thing won't even boot to RCM. I swear, autoRCM is acting weird as hell. Before I turned it off from Hekate, it showed about 67% of battery and now It can't even enter RCM.
Give me 30 minutes. I'm recharging the Switch and will try again later.
Alright, it makes no damn sense....but this....actually worked!!!
I can't freaking believe I had the same issue with both Sd Cards and 2 different CFW and yet it still worked to delete everything and start over. Still, this is basically my "backup" Sd card. Still need to see if the same thing will resolve the issue with my other SD card.
Alright, you proved a point, and you have my thanks for this. Gonna take a while to get everything properly setup again, but hopefully I can get most of my HomeBrew, Custom Themes, bootlogo screens etc. up and running with a working setup.
Thanks again
Can the current latest Hekate boot 7.0.1 stock/OFW?
Because I'd really like to preserve my eFuses (still at 5 fuses), but I REALLY want to play Tetris 99 (and also looking forward to playing Super Mario Maker 2 online this June).
Because I'd really like to preserve my eFuses (still at 5 fuses), but I REALLY want to play Tetris 99 (and also looking forward to playing Super Mario Maker 2 online this June).
Hi, I'm trying to get started hekate ctcaer 4.6 the TegraRcmGUI_v2.5 program displays Payload successfully injected, but the console screen is black does not start hekate.
I'm with FW 7.0.1.
(.....
initialized successfully!
Uploading payload (mezzo size: 92, user size: 126051, total size: 192267, total padded size: 192512)...
Smashing the stack!
Smashed the stack with a 0x0000 byte SETUP request!
Payload successfully injected)
I'm with FW 7.0.1.
(.....
initialized successfully!
Uploading payload (mezzo size: 92, user size: 126051, total size: 192267, total padded size: 192512)...
Smashing the stack!
Smashed the stack with a 0x0000 byte SETUP request!
Payload successfully injected)
The only way currently is to get hekate to chainload fusee-primary, and boot new atmosphere that way. Wait for a new hekate update to do it the other way.
Similar threads
-
-
@
Sonic Angel Knight:
Or, I also heard that if you use flash memory, it can act as more "RAM" at least windows tell me when I stick a flash drive into it. -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
@
K3Nv2:
I can think of the design teams process another joystick and no audio or a joystick and mono audio -
-
-
-
-
-
-
-
