Homebrew [Release] fastboot3DS - open source bootloader / chainloader

d0k3 · Jan 2, 2018

wicksand420 said:
@d0k3 I have 2 questions, 1st, can we use custom boot pictures? 2nd, can we tell it to load luma from nand on boot?

wicksand420 said:
@d0k3 is there a way to load all payloads, fastboot, and the config from nand?

Custom boot pictures are only possible when you compile yourself. And, yeah, you can have a config on NAND, but that config is copied to any SD card you use, and the SD card takes priority. This is done so you don't mess up your config file and end up with a softbrick (you can always copy a proper config to the SD card, which will take priority).

wicksand420 · Jan 2, 2018

d0k3 said:
Custom boot pictures are only possible when you compile yourself. And, yeah, you can have a config on NAND, but that config is copied to any SD card you use, and the SD card takes priority. This is done so you don't mess up your config file and end up with a softbrick (you can always copy a proper config to the SD card, which will take priority).

Thank you @d0k3

PowerBall253 · Jan 3, 2018

@d0k3 What will happen if I install FB3DS to FIRM0 and then B9S to FIRM1?

Wolfvak · Jan 3, 2018

PowerBall253 said:
@d0k3 What will happen if I install FB3DS to FIRM0 and then B9S to FIRM1?

Is that a trick question? I'd say it just boots FB3DS lol

Cuphat · Jan 3, 2018

Wolfvak said:
Is that a trick question? I'd say it just boots FB3DS lol

Yeah, FIRM1 is never normally touched unless FIRM0 is corrupted as far as I know.

PowerBall253 · Jan 5, 2018

Has someone figured out how to obtain dev mode access? I want to have firm1 as boot slot.

wicksand420 · Jan 5, 2018

why are the nand dumps and the config stored in the 3ds folder? Is there a way to change this?

d0k3 · Jan 9, 2018

Alright, new release, now with 100% less bugs. Grab your copy from here:

fastboot3ds v1.0 stable

@PowerBall253 - you'll get another hint, one that may be already too much. The place where you have to enter "that code" is the credits section.

trecko1234 · Jan 9, 2018

d0k3 said:
you'll get another hint, one that may be already too much.

ruined

d0k3 · Jan 9, 2018

trecko1234 said:
ruined

Only fair for everyone who hasn't figured out so far, but, now, shush!

d0k3 · Jan 9, 2018

wicksand420 said:
why are the nand dumps and the config stored in the 3ds folder? Is there a way to change this?

Forgot. Well, enabling the user to select this would make stuff pretty complicated. I don't think the 3DS folder is a bad location. Assuming you use Rosaline / HBloader / several other homebrews, you got that folder anyways. And, at least you now exactly where to search for it.

wicksand420 · Jan 9, 2018

how do we update? place firm in ofi and run ofi?

d0k3 · Jan 9, 2018

wicksand420 said:
how do we update? place firm in ofi and run ofi?

Okay, that should have been in the readme... just put the update somewhere on your SD card and update via NAND tools -> update fastboot3DS.

wicksand420 · Jan 9, 2018

d0k3 said:
Okay, that should have been in the readme... just put the update somewhere on your SD card and update via NAND tools -> update fastboot3DS.

sorry, i didn't see it in the readme
update is in the miscellaneous section

RacsoSakuraba · Jan 9, 2018

if I have the SD outside while I am in the NAND configuration of FB3DS and I insert it, it freeze

GizmoTheGreen · Jan 9, 2018

what does the border color on the top screen mean?

RacsoSakuraba · Jan 9, 2018

GizmoTheGreen said:
what does the border color on the top screen mean?

it changes every time you enter.

GizmoTheGreen · Jan 9, 2018

RacsoSakuraba said:
it changes every time you enter.

So it's just random?

d0k3 · Jan 9, 2018

RacsoSakuraba said:
if I have the SD outside while I am in the NAND configuration of FB3DS and I insert it, it freeze

Can you provide more info? Is this reproducable? What console is this (O3DS/N3DS)? Do you boot without SD and the insert the SD while fastboot3DS is running? At what point do you insert the SD and at what point does the freeze occur? Does this happen on 1.0-stable or on the beta?

RacsoSakuraba · Jan 9, 2018

d0k3 said:
Can you provide more info? Is this reproducable? What console is this (O3DS/N3DS)? Do you boot without SD and the insert the SD while fastboot3DS is running? At what point do you insert the SD and at what point does the freeze occur? Does this happen on 1.0-stable or on the beta?

Well, yesterday I was trying for a while and it happened a couple of times in a row after the first, today I tried it and nothing, it does not freeze. It is an O3DS with FB3DS 1.0 Stable. It happened right on the only FB3DS screen, I tried to move the cursor in the FB3DS menu but it did not move but as I said, suddenly it does not happen when I wanted to reproduce it today.

GizmoTheGreen said:
So it's just random?

Yeah!

Homebrew [Release] fastboot3DS - open source bootloader / chainloader

3DS Homebrew Legend

Well-Known Member

Well-Known Member

nyaa~

Well-Known Member

Well-Known Member

Well-Known Member

3DS Homebrew Legend

Well-Known Member

3DS Homebrew Legend

3DS Homebrew Legend

Well-Known Member

3DS Homebrew Legend

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

3DS Homebrew Legend

Well-Known Member

Similar threads

Popular threads in this forum