Hacking 3DS NOOB PARADISE - Ask questions here

wormdood · Oct 29, 2015

pdaboy said:
Thank you followed your advise and put on rxtools 2.5.2. installed fbi to sysnand and went into devmode and successfully upgraded sysnand to 9.2.0-20E. Just a few steps left now and I'll be finished once I get coldboot working. Thanks again for your help.

congrats you just completed the most dangerous step that most end level users normally do
the next part is easy you first you need hbc access in systemnand for this i would install cubic ninja cia (as browserhax is now dead on o3ds) then ninjhax it and use that to install themehax this link has everything you need (except for cubic ninja/ninjhax) [Tutorial] Installing rxTools Custom Firmware - (3DS and 2DS)
if you want to continue to use the hbc after instalation then you need ctrbootmanager (also in the link)

pdaboy · Oct 29, 2015

wormdood said:
congrats you just completed the most dangerous step that most end level users normally do
the next part is easy you first you need hbc access in systemnand for this i would install cubic ninja cia (as browserhax is now dead on o3ds) then ninjhax it and use that to install themehax this link has everything you need (except for cubic ninja/ninjhax) [Tutorial] Installing rxTools Custom Firmware - (3DS and 2DS)
if you want to continue to use the hbc after instalation then you need ctrbootmanager (also in the link)

Sorry you lost me on the bit about installing hbc in sysnand and installing cubic ninja.cia. Do I goto Rxtools devmode and use fbi to install the cubic ninja.cia file to sysnand and run ninjhax from there to install themehax?

wormdood · Oct 29, 2015

pdaboy said:
Sorry you lost me on the bit about installing hbc in sysnand and installing cubic ninja.cia. Do I goto Rxtools devmode and use fbi to install the cubic ninja.cia file to sysnand and run ninjhax from there to install themehax?

ok first you are done with rxtools 2.5.2 you can switch back yo the nightly (recommended)
get cubic ninja cia (google it) install it to sysnand
install ninjhax (hbc entry point) on cubic ninja
enter hbc run themehax installer (in link) from there
then install ctrbootmanager (in link) so you can continue to use hbc on your 3ds and autoboot at the same time
"and then

"

Deleted member 374589 · Oct 29, 2015

Hi guys! First time on The forum!

heh

Well,I have a 3DS, with firmware 9.8.0-25U Theres no way to play free 3ds games on it,right? ;-;
Someone is trying to update those hacks like rxtools or create others for 9.2+ firmwares?

wormdood · Oct 29, 2015

CapaHelm said:
Hi guys! First time on The forum! heh

Well,I have a 3DS, with firmware 9.8.0-25U Theres no way to play free 3ds games on it,right? ;-;
Someone is trying to update those hacks like rxtools or create others for 9.2+ firmwares?

correct if you want to play 3ds roms you need sky $90usd or a new 2ds/3ds/3dsxl/n3dsxl with 9.2 or lower

wormdood said:
there are people "working on it" but it is not something guaranteed to happen it may never happen or if it exist/(comes to be) there is no guarantee it will be made public
also a lot of people believe smea (the man behind the homebrew channel) has access to a hacked updated 3ds . . . but this is speculation

pdaboy · Oct 29, 2015

wormdood said:
ok first you are done with rxtools 2.5.2 you can switch back yo the nightly (recommended)
get cubic ninja cia (google it) install it to sysnand
install ninjhax (hbc entry point) on cubic ninja
enter hbc run themehax installer (in link) from there
then install ctrbootmanager (in link) so you can continue to use hbc on your 3ds and autoboot at the same time
"and then"

Do I need the cubic ninja cia if I have the Cubic Ninja cartridge?

wormdood · Oct 29, 2015

lol no if you have the real game you don't need the .cia

kangaroogreen · Oct 29, 2015

Hey guys, I've got an 8.1J Sysnand new 3ds, Gateway, and Sky3ds. I was wondering if there was any way to boot into emunand on the 3ds boot. Having to go through the gateway menu by swapping out both cards is a pain. And if I did this, would I be able to run the installed .cias?

I can run BBM on sysnand through Sky and install the MSET .cia, but I didn't want to brick anything and be sure before doing so.

daxtsu · Oct 29, 2015

kangaroogreen said:
Hey guys, I've got an 8.1J Sysnand new 3ds, Gateway, and Sky3ds. I was wondering if there was any way to boot into emunand on the 3ds boot. Having to go through the gateway menu by swapping out both cards is a pain. And if I did this, would I be able to run the installed .cias?

I can run BBM on sysnand through Sky and install the MSET .cia, but I didn't want to brick anything and be sure before doing so.

No, 8.1J N3DS can't use themehax, unfortunately, it's for 9.0 and up (and even if it could, Gateway doesn't support it right now). You're pretty much stuck with MSET downgrading, or booting through a game (Cubic Ninja/OoT3D).

wormdood · Oct 29, 2015

with gateway you can not autoboot emunand you gan install the mset and no longer need to go through the ds card

kangaroogreen · Oct 29, 2015

daxtsu said:
No, 8.1J N3DS can't use themehax, unfortunately, it's for 9.0 and up (and even if it could, Gateway doesn't support it right now). You're pretty much stuck with MSET downgrading, or booting through a game (Cubic Ninja/OoT3D).

Weird, I installed the 4.5 mset with gateway, but when it goes to load the emunand now, it's just a black screen.

pdaboy · Oct 29, 2015

wormdood said:
lol no if you have the real game you don't need the .cia

I seem to be hitting issues at every step. Current issue is when trying to install themehax the screen pops up with the A to install or B to cancel screen for like half a second and then I get 2 black screens. Launching it using Ninjhax 2.5. Its themehax 1.3 offline installer I believe https://gbatemp.net/threads/release-homemenuhax.398124/page-23#post-5717329 that I am using.

Battousi05 · Oct 29, 2015

is there an updated list around somewhere on compatible roms that can be trimmed at all?? The wiki for it is outta date and most of my games are newer than that list!

wormdood · Oct 29, 2015

pdaboy said:
I seem to be hitting issues at every step. Current issue is when trying to install themehax the screen pops up with the A to install or B to cancel screen for like half a second and then I get 2 black screens. Launching it using Ninjhax 2.5. Its themehax 1.3 offline installer I believe https://gbatemp.net/threads/release-homemenuhax.398124/page-23#post-5717329 that I am using.

more like every other step lol
did you apply a theme them switch back to no theme first?

Battousi05 said:
is there an updated list around somewhere on compatible roms that can be trimmed at all?? The wiki for it is outta date and most of my games are newer than that list!

i don't really wanna be "that guy" but its a wiki after all if you have any updates/additions you can make them . . . i mean its for the good of the next person with this question
but as far as i know there is no other list on temp

Battousi05 · Oct 29, 2015

i don't really wanna be "that guy" but its a wiki after all if you have any updates/additions you can make them . . . i mean its for the good of the next person with this question but as far as i know there is no other list on temp[/QUOTE said:
thats fine i appreciate it. hypothetical then for you though. If i use sky army knife or NDSTokyoTrim3 to try to trim the roms will i be able to revert them if something happens and it errors? will it tell me it errored BEFORE i go to load up the game and play it or is it literally trial and error with this stuff??

wormdood · Oct 29, 2015

no you cant revert exactly but you can just back up the files before hand
and no i don't believe it will let you know good old . . . trial and error is the way lol

pdaboy · Oct 29, 2015

wormdood said:
more like every other step lol
did you apply a theme them switch back to no theme first?

Yes I applied the pink theme and then went back to default theme. Tried it again and it does the same thing with Themehax.

wormdood · Oct 29, 2015

pdaboy said:
Yes I applied the pink theme and then went back to default theme. Tried it again and it does the same thing with Themehax.

hmm im not sure if this is a different version of the themehax installer but i used the one linked in this post #1414 it worked for me

pdaboy · Oct 29, 2015

wormdood said:
hmm im not sure if this is a different version of the themehax installer but i used the one linked in this post #1414 it worked for me

Tried that file same issue. Anyway of getting Ninjhax 2.1 as 2.5 may be the issue?

wormdood · Oct 29, 2015

it looks the same but this is the link to set up ninjhax1 NINJHAX - 3DS Homebrew Exploit you will know its the correct site because the highest fw it lets you select is 9.2

Hacking 3DS NOOB PARADISE - Ask questions here

pirate booty inspector

Well-Known Member

pirate booty inspector

New Member

pirate booty inspector

Well-Known Member

pirate booty inspector

Well-Known Member

Well-Known Member

pirate booty inspector

Well-Known Member

Well-Known Member

Active Member

pirate booty inspector

Active Member

pirate booty inspector

Well-Known Member

pirate booty inspector

Well-Known Member

pirate booty inspector

Similar threads

Popular threads in this forum