ROM Hack 3DNUS

ctkssg · Aug 8, 2015

Ronhero said:
I have old and new J/E/U 9.0 / 9.2 / 9.5 as well as 6.x mset for all three if you need it

I have old 3ds,5.1.0-4j now,i want 9.2 JPN,help me,pleas!my email:[email protected],Thanks!

xdrz · Aug 8, 2015

Hope to have update as soon as possible as I had tried to search 9.2.0E for whole two days on the internet.
I just found 9.5.0-23E and U and 4.5.0E on the internet...
but I want 9.5.0-22E or lower version...

sea_man · Aug 9, 2015

I have now this firmwares for the NEW 3ds !! if anyone need it .. just pm me.

9.5.0-23 EUR / JAP / USA

9.6.0-24 EUR / JAP /USA

Ronhero · Aug 9, 2015

sea_man said:
I have now this firmwares for the NEW 3ds !! if anyone need it .. just pm me.

9.5.0-23 EUR / JAP / USA

9.6.0-24 EUR / JAP /USA

I'll pm you the rest

CalamityDjenn · Aug 9, 2015

Hi there,

I've got an OLD 3DS with 6.2.0-4E firmware. Obviously, it was never updated through wifi as I've go the fatal error 0001001 when downgrading from Gateway's menu.
I have read I could upgrade using BigBlueMenu.3ds, so I tried to download 6.2.0-12 and 6.2.0-12E FW using 3DNUS but I had no luck : some files are missing.
3DNUS V1.10 by Ground is not helpful as it does not success to pack the first file as .cia. Why ? Anyway, I'm not sure it could download all required files to upgrade FW...

Could I just upgrade the browser to make the Gateway's downgrade working ? If so, how do I do that browser upgrade (which files do I need ?) ?

Where can I found a complete 6.2.0-12 or 6.2.0-12E firmware to upgrade from ?

Thank you for any help.

Razor83 · Aug 9, 2015

CalamityDjenn said:
3DNUS V1.10 by Ground is not helpful as it does not success to pack the first file as .cia. Why ?

You need to copy the "make_cdn_cia.exe" file from old 3DNUS v1.9 into the same folder as the new 3DNUS.exe (For some reason this file is not currently included with the 3DNUS v1.10 download)

CalamityDjenn · Aug 9, 2015

Razor83 said:
You need to copy the "make_cdn_cia.exe" file from old 3DNUS v1.9 into the same folder as the new 3DNUS.exe (For some reason this file is not currently included with the 3DNUS v1.10 download)

Thank you Razor, I didn't figure it out myself... it does pack as .cia now

What about files missing or the entire 6.2.0-12E FW missing : can I use 6.2.0-12 without some files ? Is there any chance I could find 6.2.0-12E somewhere ?

Thank you for your help.

Hashtastrophe · Aug 9, 2015

CalamityDjenn said:
Thank you Razor, I didn't figure it out myself... it does pack as .cia now

What about files missing or the entire 6.2.0-12E FW missing : can I use 6.2.0-12 without some files ? Is there any chance I could find 6.2.0-12E somewhere ?

Thank you for your help.

Check your PMs if you haven't already.

CalamityDjenn · Aug 10, 2015

Thank you very much for helping me.

I managed to get the O3DS firmware version 6.2.0-12E. I installed it in my EmuNand using BigBlueMenu.3DS and my Emunand system version was 6.3.0-12E (not 6.2.0-12E).
Then, I formated my SDCARD (to delete my EmuNand) and I did the same process to my SysNand. Everything went fine, my SysNand version became 6.3.0-12E.
After that, I finally managed to downgrade my O3DS using Gateway. ATM, my SysNand version is 4.5.0-8E.

I know this is not about 3DNUS, but I have to write that process somewhere : people who got the 0001001 error code would eventually try 3DNUS to get another firmware version and find this topic.

bitjacker · Aug 10, 2015

3dnus just sits on downloading file1... its been hours

Cinnamon · Aug 10, 2015

bitjacker said:
3dnus just sits on downloading file1... its been hours

Nintendo has taken down all files except newest firmware.

bitjacker · Aug 10, 2015

Cinnamon said:
Nintendo has taken down all files except newest firmware.

does anyone have 9.2 u?

netpilot242 · Aug 11, 2015

I've been thinking a long time about it. Now I'll do it.
...

1.) If you need 9.2e, then simply use CTR-BGMP. Herewith you can also update your emunand. I have tested this myself (GW3.4).
for 9.2u can use CTR-AXCE.

2.) For all other I have a nearly complete // CIA & RAW // serverimage (2GB).
CHN 4.0.0-9.9.0,
EUR 2.0.0-9.9.0,
JPN 2.0.0-9.9.0,
KOR 4.0.0-9.9.0,
TWN 4.1.0-9.9.0 and
USA 2.0.0-9.9.0.

Long live the homebrew scene!

Ronhero · Aug 11, 2015

bitjacker said:
does anyone have 9.2 u?

Yes

xdrz · Aug 11, 2015

I want 9.2e
i don't know why after i set up 9.0e on my 4.4j console,
it just freeze on 'home menu' when i left from notification or browser
i just wondering is it the problem of the 9.0e cia...

meowlaxy · Aug 11, 2015

Lf> 3DS firmware 9.2.0-20 U

Golui · Aug 12, 2015

When I get existing titles, do I overwrite or just ignore? Last time I tried overwriting I bricked my emuNAND, but that might have been circumstantial.

I'm using FBI.

BooBooBear · Aug 14, 2015

On 8.1-J I just installed 0004003020008802.cia onto the sysnand via gateway, and the browser works when on the gateway sysnand. However, the browser just hangs on the actual sysnand when I try to access it. How should I attempt to fix it?

Nirmonculus · Aug 15, 2015

Hi there, can anyone help with installing the 7.1 browser?

I already have the file but my bbm won't install it. Saying that it is an invalid cia file.

I'm on 9.9 emunand US, gateway. Please help, thanks! XD I just want an exploitable browser.

LucinaofYlisse · Aug 15, 2015

I too am trying to do the same thing as Nirmonculus, help would be appreciated c:

ROM Hack 3DNUS

New Member

Well-Known Member

New Member

Too Weird to Live, Too Rare to Die

Well-Known Member

Well-Known Member

Well-Known Member

Wizard

Well-Known Member

GBAtemp Disorderly

Well-Known Member

GBAtemp Disorderly

New Member

Too Weird to Live, Too Rare to Die

Well-Known Member

New Member

Member

Well-Known Member

Well-Known Member

New Member

Similar threads

Popular threads in this forum