Hardware PS5 Slim (EDM-052) shuts down in PS5 games (under load) - Syscon logs B0088108 & 808B0000

shawerma

New Member
Newbie
Joined
Sep 28, 2026
Messages
2
Reaction score
0
Trophies
0
Age
25
XP
9
Country
United States
Hi everyone,

Device: PS5 Slim (CFI-2115, Board: EDM-052, PSU: ADP-400JR).

Symptoms:

Here is the behavior:
In the main dashboard/menu or safe mode, the console can sit indefinitely without issues. In light, low-demand PS4 games it also runs for a long time. However, the heavier the load, the faster it crashes. In native PS5 games, it shuts down anywhere between 5 to 20 minutes, sometimes even faster depending on the load.

Crash sequence:
Video signal cuts out suddenly (black screen), but the console stays on for another 5-10 seconds with the white power LED on and the fan spinning. After that, it fully shuts down. Right after the crash, the first press on the power button gives 1 beep and does nothing. The second press boots the console back up with 3 beeps and does a storage rebuild.

Diagnostics & Measured Facts:

  1. 12V rail under load: Monitored with a multimeter during gameplay right up to the crash. Voltage remains rock steady at 12.06V – 12.08V with zero droop.
  2. Cold resistance readings (calibrated probes):
    • VDD_GFX / VDD_CORE: 2.0 – 2.1 Ω
    • VDD_SOC (R15 choke): 4.1 Ω
    • VDD_MEM (1.35V GDDR6): 21.5 Ω
    • VDD_MISC (0.85V): 9.6 Ω
  3. Syscon UART telemetry:
    • At crash time: TSoCTSoC is between 51.6 °C and 77.3 °C (no APU thermal shutdown), TENVTENV is 27–35 °C.
    • Error log sequence is 100% consistent:
      • Primary trigger: B0088108 (Sonics Bus Error)
      • Exactly 3–4 seconds later: 808B0000 / 808B00FF (SSD Controller Watchdog Timeout), followed by 80830019.
  4. Thermal interface: High-performance thermal putty (SmartMaster Pro, 13.5 W/mK) applied on B-side GDDR6 and VRMs.
Has anyone encountered this specific Sonics bus error cascade on EDM-040 / EDM-052 boards?
 
My understanding : the communication with the Infineon XDPE controller fails and the PS5 therefore shutsdown the PS5.
Since it happens under load, it might be a failing XDPE controller or some thermal stress from other components like the DRAM.

If you have no replacement at hand, you could try to reflow it to see if that makes any difference.

stetofix was already so kind to post some details in this thread :
https://www.tronicsfixforum.com/t/p...-abruptly-looking-for-diagnostic-advice/17091
 
My understanding : the communication with the Infineon XDPE controller fails and the PS5 therefore shutsdown the PS5.
Since it happens under load, it might be a failing XDPE controller or some thermal stress from other components like the DRAM.

If you have no replacement at hand, you could try to reflow it to see if that makes any difference.

stetofix was already so kind to post some details in this thread :
https://www.tronicsfixforum.com/t/p...-abruptly-looking-for-diagnostic-advice/17091
Yes, I saw that post; it specifically mentions the xdpe infineon itself and says it needs to be replaced. I’m not 100% sure it will help, but I’ll keep it in mind. Thanks!
 

Site & Scene News

New Hot Discussed User Submitted