Hacking SWITCH NOOB PARADISE - Ask questions here

[pupuz]

You just need this section added at the end.

[Atmosphere CFW Emunand]
payload=bootloader/payloads/fusee.bin
icon=bootloader/res/icon_payload.bmp

You will also need a copy of fusee.bin from here:
https://github.com/Atmosphere-NX/Atmosphere/releases/tag/1.3.2

Place it in /bootloader/payloads/fusee.bin

e: did somebody do an update on your other card perhaps? If fusee.bin is missing over there you will see a lockup during boot. Might want to double check…this could be the issue.

Finally the temporary SD has loaded into emuNAND correctly, what should I do next?

 

[binkinator]

Finally the temporary SD has loaded into emuNAND correctly, what should I do next?

OK, we now know for certain it’s just a config tweak somewhere on your other card. Did you grab fusee.bin from the same place and are 100% certain it’s in the right directory? Just crossing off simple stuff first.

E: Let’s take a look at your emunand with NXNandManager, make sure it mounts and all that good stuff…it would be a good time to grab a backup of you emunand and put it on your PC.

 

[Draxzelex]

So, I was searching on Google and found a Wii U CBHC Unbrick without soldering, But when it said "requires NS for udpih", I am confused and don't know if using the udpih payload will ban my Switch? I am a noob at this keep in mind.

Only running CFW & homebrew can get Nintendo Switch consoles banned. Running payloads don't get them banned.

 

[pupuz]

OK, we now know for certain it’s just a config tweak somewhere on your other card. Did you grab fusee.bin from the same place and are 100% certain it’s in the right directory? Just crossing off simple stuff first.

E: Let’s take a look at your emunand with NXNandManager, make sure it mounts and all that good stuff…it would be a good time to grab a backup of you emunand and put it on your PC.

Sorry, this app does nothing for me, scanning the drives, then says "NXStorage Not Found" - what should I be looking for?

 

[binkinator]

Sorry, this app does nothing for me, scanning the drives, then says "NXStorage Not Found" - what should I be looking for?

With your old sd card in your PC (and your FAT partition browsable via Explorer), it doesn’t see any emunand? We might be in a bad spot since this is how we would get to all your game saves. Can you see the emunand on the temporary sdcard? Switch cards and restart the app to see.

if you can’t see it on your temp card either, let’s dump your prod.keys from your Switch using Lockpick_RCM while booted up on your temporary card. Once you have your keys, transfer them to NXNandManager and try again.

 

[pupuz]

With your old sd card in your PC (and your FAT partition browsable via Explorer), it doesn’t see any emunand? We might be in a bad spot since this is how we would get to all your game saves. Can you see the emunand on the temporary sdcard? Switch cards and restart the app to see.

if you can’t see it on your temp card either, let’s dump your prod.keys from your Switch using Lockpick_RCM while booted up on your temporary card. Once you have your keys, transfer them to NXNandManager and try again.

Just rebooted my PC and it's showing my emuNAND now, where should I be looking? Changed fusee.bin on main SD to correct one, tried to load and it doesn't. Please advise. Thank you!

 

[binkinator]

Just rebooted my PC and it's showing my emuNAND now, where should I be looking? Changed fusee.bin on main SD to correct one, tried to load and it doesn't. Please advise. Thank you!

So first and foremost make a backup of your emunand using NXNandmanager. This contains your game saves and such. Take a look in the /USER/Saves to make sure everything is intact.

 

[pupuz]

It doesn't let me open /User/Saves and dumps everything into single 30Gb .bin file. But says saves should be there. What can I do next?

Post automatically merged: Oct 9, 2022

So first and foremost make a backup of your emunand using NXNandmanager. This contains your game saves and such. Take a look in the /USER/Saves to make sure everything is intact.

 

[binkinator]

It doesn't let me open /User/Saves and dumps everything into single 30Gb .bin file. But says saves should be there. What can I do next?

Post automatically merged: Oct 9, 2022

I was going to go somewhere else with this but just had an idea. You can restore the emunand backup to your temp card and see if the temp card still boots. this will tell us if it’s the emunand or something on your FAT file system.

e: this is what the explorer window would look like to browse game saves:

 

[pupuz]

I was going to go somewhere else with this but just had an idea. You can restore the emunand backup to your temp card and see if the temp card still boots. this will tell us if it’s the emunand or something on your FAT file system.

e: this is what the explorer window would look like to browse game saves:
View attachment 331111

Spent hours to get NXNandManager to open my temp SD card, all the same error - Input file/drive is not a valid NX Storage, Iidk what to do, old SD card opens well

Post automatically merged: Oct 9, 2022

I was going to go somewhere else with this but just had an idea. You can restore the emunand backup to your temp card and see if the temp card still boots. this will tell us if it’s the emunand or something on your FAT file system.

e: this is what the explorer window would look like to browse game saves:
View attachment 331111

how to get to your screenshot? where is this explorer? I only see this (attached) and can't open anything else

 

[binkinator]

Spent hours to get NXNandManager to open my temp SD card, all the same error - Input file/drive is not a valid NX Storage, Iidk what to do, old SD card opens well

Post automatically merged: Oct 9, 2022

how to get to your screenshot? where is this explorer? I only see this (attached) and can't open anything else

Any chance you made the emunanf file based on the temp card? Try open files in the tabs at the top.

To get to the explorer you click on the USER partition, like you did, and then the Folder button to the left of the Mount button is supposed to turn from grey to yellow and you simply click on it. Not sure why yours is grey.

e: ninja edit. I know what it is.

You Don’t have your keys. You need to use your temp sd card to run lockpick_RCM and dump your keys to your card and then move the, to your nxnandmanager directory on your PC.

‘’See where your Device ID says KEYS NEEDED? The keys will fix that And yiu will n]be able to browse your saves.

 

[pupuz]

Any chance you made the emunanf file based on the temp card? Try open files in the tabs at the top.

To get to the explorer you click on the USER partition, like you did, and then the Folder button to the left of the Mount button is supposed to turn from grey to yellow and you simply click on it. Not sure why yours is grey.

e: ninja edit. I know what it is.

You Don’t have your keys. You need to use your temp sd card to run lockpick_RCM and dump your keys to your card and then move the, to your nxnandmanager directory on your PC.

‘’See where your Device ID says KEYS NEEDED? The keys will fix that And yiu will n]be able to browse your saves.

Thank you for your time so much, didn't expect to spend my whole Sunday figuring out how to make Switch running, what a disaster... So - I've open my keys and I can see the saves on my main SD. The backup is from the main SD as well. It's that NXNandManager doesn't see my temp SD emuNand.

 

[binkinator]

Thank you for your time so much, didn't expect to spend my whole Sunday figuring out how to make Switch running, what a disaster... So - I've open my keys and I can see the saves on my main SD. The backup is from the main SD as well. It's that NXNandManager doesn't see my temp SD emuNand.

Can you go to Files in the top tab and instead of opening a disk, open files and navigate to your sd card? I’m thinking maybe you emunand is put on a disk partition but on the file system itself.

 

[pupuz]

Can you go to Files in the top tab and instead of opening a disk, open files and navigate to your sd card? I’m thinking maybe you emunand is put on a disk partition but on the file system itself.

I can't open a folder, need to choose a file - which file should I open?

Post automatically merged: Oct 9, 2022

I can't open a folder, need to choose a file - which file should I open?

Never mind - just opened some 00 file, first one in the first folder and looks like it worked. Restoring now

Post automatically merged: Oct 10, 2022

Can you go to Files in the top tab and instead of opening a disk, open files and navigate to your sd card? I’m thinking maybe you emunand is put on a disk partition but on the file system itself.

I've restored my emuNand to temporary SD and the problem replicated - black screen after second Atmosphere logo, what does it mean and what can I do now? Thx

 

[steverebo]

What app do I need to view and toggle on off all the sys modules like amuiibo on atmosphere?

 

[binkinator]

What app do I need to view and toggle on off all the sys modules like amuiibo on atmosphere?

ovl-sysmodules will do it, as will Hekate toolbox.

Hekate Toolbox — Rebrand of Kosmos Toolbox that turns sys-module flags on/off and reboot to a

 

[aTedNeedshelp]

hey, i got this rcm loader device and it has these files on it. I’m a noob and unsure if I should try plugging this right into my switch and see if it works

 

[LastStranger]

Hello, I want to try my hand and try to write something useful on the switch and now I'm stuck on one thing. I want to write a sysmodule for atma as a test project that would turn on home highlighting ala this using a combination (only it doesn’t work on the latest atmosphere), but I didn’t find information on how to assemble modules for the atmosphere, I found only about .nro, which are purely like applications, but also some intelligible docks on how they will differ in terms of code from .nro and how to write them. Can anyone provide information about this?

 

[binkinator]

hey, i got this rcm loader device and it has these files on it. I’m a noob and unsure if I should try plugging this right into my switch and see if it works

RCMloader is very solid. Lots of folks use it w/o issues, including me.

here’s the main site: https://www.xkit.xyz/support/

here’sma quick how to: https://www.cheatslips.com/accessories/rcmloader

It won’t hurt any switch whatsoever, but will only work on an unpatched V1 Erista Model.

So yeah, you’ll need to do specific stuff to make use of it…

More about THAT topic over here: https://rentry.co/SwitchHackingIsEasy

Post automatically merged: Oct 10, 2022

Hello, I want to try my hand and try to write something useful on the switch and now I'm stuck on one thing. I want to write a sysmodule for atma as a test project that would turn on home highlighting ala this using a combination (only it doesn’t work on the latest atmosphere), but I didn’t find information on how to assemble modules for the atmosphere, I found only about .nro, which are purely like applications, but also some intelligible docks on how they will differ in terms of code from .nro and how to write them. Can anyone provide information about this?

Best place to start would be here: https://switch.homebrew.guide/homebrew_dev/introduction.html

You’re probably looking to build something for Stratosphere. I would start small by grabbing the code for another Sysmodule and studying how they did it and then branch out from there once you fully understand how it works.

 

[pupuz]

Can you go to Files in the top tab and instead of opening a disk, open files and navigate to your sd card? I’m thinking maybe you emunand is put on a disk partition but on the file system itself.

Hey mate, any chance if you could help me further? I think we were on the right track, thank you!