Hardware Components used on the Switch (mostly the motherboard and main console)

[dbbmoafc]

I just repaired a Switch Lite, it uses the same LCD driver IC, and the Rohm part number BD8316GWL you found is correct. It is laid out in a 4x3 grid with one ball being notably smaller than the rest, giving it the 11 pins.

Does anybody have identification on this component? I tried tracking it down, there's two references to 8316 and 6T59 - so I figured maybe it's the BD8316GWL but the dimensions are wrong and it has 11 pins opposed to the one here which is only 9 pin(?). I found an aliexpress page selling them and I've ordered some, so I can better see those at least when they arrive.

 

[laotoulyh]

Test OK!
LCD is 503300-4110
FPC2 is 503300-2910

 

[rokko]

Hi
Anyone know the value of the cap in the pic please

 

[Modificatorul]

Hi
Anyone know the value of the cap in the pic please

https://ro.mouser.com/ProductDetail/Murata-Electronics/GRM033R71E103KE14D?
qs=jHkklCh7amgiOYtaxTSVCQ==

https://uk.farnell.com/murata/grm033r71e103ke14d/cap-0-01uf-25v-mlcc-0201/dp/2990696?st=10 nf 0201

10nf, size 0201, 25v.

 

[rokko]

Hi Modificatorul
many thanks for the reply and the links

 

[fan2k20]

anybody knows this capacitor?

 

[ntinovs]

Hi guys! The capacitor circled in red shorts. I'm suspecting that the pcb is shorting given that I removed both, the capacitor and the bq24193 and it's still shorted. I removed the solder from the rails as well but didn't work. Is there any other component that might be responsible for shorting the capacitor?

 

[rokko]

Hi
There are 2 caps just above the sd card reader anyone know the info on the larger of the 2

 

[RascalJack]

Hello for the Switch V2, what would the purpose of the missing cap right of SP2 be? When installing the SX core ribbon cable, the pad on the cap to the right of SP2 was damaged. The system does not power on even though the battery is measuring proper voltage and rest of caps are in place correctly.

 

[Ttm3]

Anyone know what size or where to get the filters under the p13 on a v2? They are significantly smaller than the v1 filters.

 

[Ottoclav]

https://ro.mouser.com/ProductDetail/Murata-Electronics/GRM033R71E103KE14D?
qs=jHkklCh7amgiOYtaxTSVCQ==

https://uk.farnell.com/murata/grm033r71e103ke14d/cap-0-01uf-25v-mlcc-0201/dp/2990696?st=10 nf 0201

10nf, size 0201, 25v.

I needed these, Thanks!

 

[Ttm3]

Thanks to @Modificatorul for the link.

Replaced filter on V2 below p13usb the one all the way to the left.

https://www2.mouser.com/ProductDetail/Murata-Electronics/DLM0NSM900HY2D?qs=sGAEpiMZZMtpatlpu7gqO5jsQN3VynFrG9Z4lG/YlqypW5LAXV3eaA==


The one all the way to the right is from a V1 & not fixed to the board it is there as an example only of size difference between filters/chokes on V1 & V2

 

[Krost]

Hi guys, i need help identifying these two components:

1 - Missing


2 - Short



Anyone? Thanks!

 

[White_Raven_X]

Would anyone be able to help me identify these two small components to the left of the cpu on a HAC-CPU-10

 

[de9ed]

Would anyone be able to help me identify these two small components to the left of the cpu on a HAC-CPU-10

 

[White_Raven_X]

thank you! life saver

 

[White_Raven_X]

i found cap cer 0.1uf 10v x6s 0201 part number LMK063C6104KP-F. Is that the same?

 

[de9ed]

i found cap cer 0.1uf 10v x6s 0201 part number LMK063C6104KP-F. Is that the same?

Sorry, I would not know. i'll wait for someone with more experience to help you

 

[White_Raven_X]

Hi guys, i need help identifying these two components:

1 - Missing
View attachment 230657 View attachment 230655

2 - Short

View attachment 230658

Anyone? Thanks!

Not sure what your missing piece is but here's a picture... Hope it helps.

 

[Krost]

Not sure what your missing piece is but here's a picture... Hope it helps.

Thanks man, that's a start!
With that "05" it might be a Zener Diode EDZ10B 150mW 10V
Can someone with experience confirm?

Edit: Ok, I don't think that that's it :\
Is it maybe just a 0.5pF capacitor?