Can someone please help a Noob continue his switch modding. I did a Nand/rawnand backup and dropped Kosmos on my sd card and need help continuing with How to install and use Apps.
Redo your setup for Atmosphere by wiping your SD card clean (after backing up the Nintendo folder as well as any game mods).I am using album, because the game menu override does not seem to work. Holding R and selecting a game only launches the game.
You need to use Quark on your computer to install .NSP files via USB.Ok so I found the option to install via usb in gold leaf but it says not connected to pc ?
I did have it connected to another pc at one point it tried to install nintendo pc driver (though sure already had due to rcm) .
Could it just be due to the cables being on the cheap side or do I need to install an app on pc for it to conenct to ?
I was dumping my Xenoblade 2 but I only have like 2 gbs free after so I can't install to sd with the dlc I have.
I'm just going to install to the switch storage for now until i get a bigger sd card.
Delete the sept folder on your SD card. This one is from Atmosphere.Hello Guys
I have a question I hope someone can help here.
I was a 64 GB sd card with reinx. I bought a 256 GB card and I installed atmosphere 9.4 on that and want to boot with it. I able boot with hekate. My problem is that using gold leaf 7.3 which cannot connect with USB to Mac. So I wanted to go back reinx. When I change back the card to reinx installed and I start th console in ram mode its says:
Welcome to Athmsphere Fusee!
ERROR fatal error : failed to stat stage 2 )atmosphere fusee secondary bin.
Press power to reboot.
What should I do to go back to reinx?
https://switch.homebrew.guide/Can someone please help a Noob continue his switch modding. I did a Nand/rawnand backup and dropped Kosmos on my sd card and need help continuing with How to install and use Apps.
Does the issue also occur with ReiNX?Hi, so ever since i updated atmosphere to the latest version, i cannot install the vast majority of NSPs. I get something like this "missing NCA files, your firmware is too low or no sigpatches"
Im on firmware 8.0.1 trying to install older games, so its not a firmware issue im sure.
The few games i managed to install work just fine. So im at a loss of what the problem could be.
thanks!
NoThere's no way to just "install" an icon of a game right (not without installing the full base game or update file)
When I first hacked my Switch I used two screwdrivers to enter RCM mode. I then proceeded to enable AutoRCM on ReiNX. If I switched to either SX OS or Atmosphere will I have to re-enable AutoRCM or will it stay on? I'd rather not prefer using that ghetto method too much.
AutoRCM is not tied to CFW. It is tied to your console. More specifically, its a modification that "bricks" your console so it AUTOmatically enters RCM without respect to CFW.When I first hacked my Switch I used two screwdrivers to enter RCM mode. I then proceeded to enable AutoRCM on ReiNX. If I switched to either SX OS or Atmosphere will I have to re-enable AutoRCM or will it stay on? I'd rather not prefer using that ghetto method too much.
You need to use Quark on your computer to install .NSP files via USB.
Hi, so ever since i updated atmosphere to the latest version, i cannot install the vast majority of NSPs. I get something like this "missing NCA files, your firmware is too low or no sigpatches"
Im on firmware 8.0.1 trying to install older games, so its not a firmware issue im sure.
The few games i managed to install work just fine. So im at a loss of what the problem could be.
thanks!
Atmosphere is a CFW while Hekate is a payload/bootloader. Only payloads go on dongles such as Hekate. CFW can only go on the SD card but payloads can also be there.
Sounds like the previous owner installed Incognito which removes the PRODINFO from the console. You will need to obtain that from the previous owner otherwise you are effectively banned. You cannot regenerate PRODINFO as it is console-unique.
Personally, I never use Goldleaf to install any of .NSP files. I always use Adubbz Tinfoil and Aluminum FoilI downloaded quark but it never has the small usb icon it talks about in the usb fail dialog. Could it be the newer version of gold leaf not picking up the usb connection?
I saw some mention using older version of gold leaf and Quark.
https://github.com/XorTroll/Goldleaf/issues/392
I tried on Win 10 and Win 7 both x64 and tried usb 2 and 3. 0.73 gold leaf though. Tried 3 different cables including one being for a wired controller for switch.
You can use the local save data transfer feature.I have a Switch on SX OS emunand. I also have a Switch Lite on latest OFW. Is there a way to use saves across both devices for my legit carts? (I mainly use Switch docked and Lite on the go)
Without PRODINFO, you cannot play online, use the eShop, or update your console/games. But all CFW and homebrew as well as offline games will work just fine.The seller is not cooperating even though he said he has that file. He might be lying.
Here's the thing, I plan to hack it anyway. Will I have any trouble playing games or hacking it without a PRODINFO?
Use the homebrew application ChoiDujourNX to update your firmware without burning fuses.Hi, all. I'm currently on 8.1.0 using Atlas Atmosphere. I want to upgrade to the newest firmware and then install a homebrew that supports installing NSZ files (I use hbg store). Can you please tell me what steps I should take? I see lots of different guides online with different configuration. It's confusing. Thanks.
Go to Data Management to uninstall it or press (+) on the icon in the Home Screen.Hey all, tried installing Luigi's Mansion 3 .xci and now the tile for it is just a blank square and won't let me even go to options to delete it. How can I delete it and then install it correctly? I installed it with both zerotwoxci and lithium.
Edit: I guess maybe based on research I shouldn't have installed the update file. Any way to undo that?
Use the homebrew application ChoiDujourNX to update your firmware
If you're already using Airplane Mode, you don't need any additional protection. If you're super paranoid, you can setup 90DNS on your Switch's internet settings.
Assuming the save file hasn't been modified (or a copy of someone else's), the risk of a ban is little to none.
Yes so you will have to reinstall the games then/
.NSP files are smaller and faster than .XCI files but require installation before they can be used whereas .XCI files can be mounted without any installation. All CFW support .NSP files however SX OS is the only CFW to support mounting .XCI files. Other CFW support installing .XCI files but this has a similar effect to installing a .NSP file.
Nintendo has more details on that error code.
If it is patched, then it is your hardware that is patched. For patched consoles, the software version is important. If the firmware is 4.1 or lower, it can run CFW now. If the firmware is between 5.0 and 7.0.1, it can run CFW in the future but there is no telling when. If the firmware is 8.0 or higher, then it may never run CFW.
You do risk a ban by going online to update your firmware. If you do not want to go online to update your firmware, use the homebrew application ChoiDujourNX
Now I see the issue. If it is only the newer games that do not work, then that means your firmware version is too low. You will have to update your firmware. I recommend using ChoiDujourNX to update your firmware.