Hacking Question After restoring rawnand, boot0 & boot1, Switch didn't turn on, no charging, no payload, nothing

[Dust2dust]

I totally agree with you, but my console does not react to any input. (power + volume up etc.).

Actually, it's volume up + power. I mean, from an OFF state console, you hold Volume up, then tap Power. That would put you in RCM, assuming the jig is inserted properly. If you have Windows, try TegraRcmGUI to see if it recognizes the RCM (should turn green if it does). If positive, inject the payload.

 

[PyroGoat]

Disregard *

 

[lordelan]

I totally agree with you, but my console does not react to any input. (power + volume up etc.).

If you're not lying with your profile settings, you're living in the same country as me. Maybe you're not too far away so feel free to PM me.
If this thread won't be of any help for you I might help you in real life.

Edit @All: I thought (apart from standby) the fuse count doesn't matter at all if you skip the Nintendo stock bootloader. So booting into OFW 2.x with hekate should work, no matter how many fuses are burnt.

 

[mYemc]

Actually, it's volume up + power. I mean, from an OFF state console, you hold Volume up, then tap Power. That would put you in RCM, assuming the jig is inserted properly. If you have Windows, try TegraRcmGUI to see if it recognizes the RCM (should turn green if it does). If positive, inject the payload.

Yes thank you. I tried this method for about 2 hours. The console would not be recognized by my pc anymore.

--------------------- MERGED ---------------------------

If you're not lying with your profile settings, you're living in the same country as me. Maybe you're not too far away so feel free to PM me.
If this thread won't be of any help for you I might help you in real life.

Edit @All: I thought (apart from standby) the fuse count doesn't matter at all if you skip the Nintendo stock bootloader. So booting into OFW 2.x with hekate should work, no matter how many fuses are burnt.

This would be very kind of you. I definetly want that!

 

[lordelan]

Yes thank you. I tried this method for about 2 hours. The console would not be recognized by my pc anymore.

The battery might be empty.
Plug in the charging cable. Hold the POWER button for 2 seconds and release it. Then wait another 2 seconds (it might be on now, in RCM or whatever). Then hold it for 15 seconds to be completely sure it's turned off. It should charge now. Let it charge for at least 30 minutes (the more the better).

 

[mYemc]

Now I am charging the console for 30 minutes and do nothing. Thank you!

 

[Kafluke]

Now I am charging the console for 30 minutes and do nothing. Thank you!

If the battery died completely 30 min wont cut it. You'll need a few hours

 

[mYemc]

If the battery died completely 30 min wont cut it. You'll need a few hours

Thank you very much. I am realizing patience is needed.

 

[lordelan]

Here comes the irony: TX rescued him when Atmo refused to.
Accessing the album icon ended in a freeze while he was able to open it within an unlicensed SX OS (R + album) to launch ChoiDujourNX.

 

[mYemc]

My Switch works fine on 6.2.0. You guys helped me very much. Thank you for your patience with newcomers. =)

 

[Paulsar99]

Congrats that you were able to fix it. Now this time back up your boot and nand again.

 

[mYemc]

Congrats that you were able to fix it. Now this time back up your boot and nand again.

Yes I do!

 

[Lumince]

I totally agree with you, but my console does not react to any input. (power + volume up etc.).

Do you have autorcm installed??/ If you do, the battery most likely died? If not, theres still probably a big chance that the battery is dead since your fuses are wrong and its basically bricked atm.

 

[Hayato213]

Do you have autorcm installed??/ If you do, the battery most likely died? If not, theres still probably a big chance that the battery is dead since your fuses are wrong and its basically bricked atm.

He already fixed it.

 

[Lumince]

He already fixed it.

Hmmm This is why I should check if there is a page 2 more often.... Was it the battery? lmao

 

[mYemc]

Hmmm This is why I should check if there is a page 2 more often.... Was it the battery? lmao

Yes, it was the battery. But you do not think about it when you playing around with some payloads...

 

[Dust2dust]

Nice that you were able to fix it. Out of curiosity, why did you want to downgrade to your old firmware 2.1?

 

[mYemc]

Nice that you were able to fix it. Out of curiosity, why did you want to downgrade to your old firmware 2.1?

In the most common Tutorials were written that i should stay on the lowest software possible. I saw to late that the threads were outdated ... Simply my fault by having not enough knowledge.

 

[Lumince]

Yes, it was the battery. But you do not think about it when you playing around with some payloads...

Bad news is if you have autorcm installed and turned off the switch and left it like that then the battery will just drain a lot. Glad its fixed though. Ive had my switch die once with autorcm mode installed and that was when someone turned it off and set it aside (I thought they put it in sleep mode)

 

[jorgesd]

In the most common Tutorials were written that i should stay on the lowest software possible. I saw to late that the threads were outdated ... Simply my fault by having not enough knowledge.

glad you fixed your problem. I'm new to the switch scene too but i was lucky enough to encounter several users that guided in the process of my console's modification. As a newbie, i always investigate a lot of what to do or not before messing with my console by making questions in this place for assistance.