Hacking WUP installer GX2 doesn't recognize my Wii U Formatted USB HDD

[showdownx]

I ran an issue that just started yesterday. My USB HDD is NOT being recognized by WUP Installer GX2, this started happening happened last night. I was able to install games, updates, and DLC's with 'WUP Installer GX2' before, now when I hit the install button I get an error message stating "Error 0xFFFCFFE9 access failed (no USB storage attached)." I'm getting all my content from 'Wii U USB Helper' like I been doing.

The vWii USB HDD works fine. However the Wii U USB HDD is being recognized by the Wii U system, the games still show up on the Wii U menu screen but WUP Installer GX2 don't recognize the drive when I'm trying install games, DLC's and updates. I even tried WUP Installer GX2 Mod version and that one don't work either.

The Wii U USB External HDD is fully formatted by the Wii U (using the message that pops up when a USB device is connected for the first time). It's a Toshiba 3TB Powered USB HDD, there is no multiple partitions and I still have 1.5TB of space left on the drive. I used the Original 'Mocha CFW' after every reboot, then used WUP Installer GX2 to install the content I downloaded from WII U USB Helper and everything was working fine. WUP Installer was installing everything correctly until last night.

But you know what, I just remember I did accidentally ran Mocha CFW FAT32 version last night too. I don't know if that has something to do with it. I restarted the Wii U afterwards.

I am using a HDD identical to for the vWii side of things as well, my two drives (Wii U and vWii drives) look like identical twins. I don't think that has something to do with this issue or not.

I have Haxchi installed (I don't have CBHC at the moment). I don't think my Haxchi is not working properly. Well I did the whole Haxchi install over a NDS game but it has the 'h' for Homebrew on that channel now, and when I click on it Homebrew opens up.

Please tell me what I am doing wrong?

 

[Olmectron]

I ran an issue that just started yesterday. My USB HDD is NOT being recognized by WUP Installer GX2, this started happening happened last night. I was able to install games, updates, and DLC's with 'WUP Installer GX2' before, now when I hit the install button I get an error message stating "Error 0xFFFCFFE9 access failed (no USB storage attached)." I'm getting all my content from 'Wii U USB Helper' like I been doing.

The vWii USB HDD works fine. However the Wii U USB HDD is being recognized by the Wii U system, the games still show up on the Wii U menu screen but WUP Installer GX2 don't recognize the drive when I'm trying install games, DLC's and updates. I even tried WUP Installer GX2 Mod version and that one don't work either.

The Wii U USB External HDD is fully formatted by the Wii U (using the message that pops up when a USB device is connected for the first time). It's a Toshiba 3TB Powered USB HDD, there is no multiple partitions and I still have 1.5TB of space left on the drive. I used the Original 'Mocha CFW' after every reboot, then used WUP Installer GX2 to install the content I downloaded from WII U USB Helper and everything was working fine. WUP Installer was installing everything correctly until last night.

But you know what, I just remember I did accidentally ran Mocha CFW FAT32 version last night too. I don't know if that has something to do with it. I restarted the Wii U afterwards.

I am using a HDD identical to for the vWii side of things as well, my two drives (Wii U and vWii drives) look like identical twins. I don't think that has something to do with this issue or not.

I have Haxchi installed (I don't have CBHC at the moment). I don't think my Haxchi is not working properly. Well I did the whole Haxchi install over a NDS game but it has the 'h' for Homebrew on that channel now, and when I click on it Homebrew opens up.

Please tell me what I am doing wrong?

The Wii U was said by Nintendo to not support >2TB drives.

Maybe there's a problem with the code used in WUP Installer GX2 because you are nearly getting to 2 TB? Have you tested with the non-GX2 "Y mod" version? (The one with only text in screen, and not UI)

 

[showdownx]

The Wii U was said by Nintendo to not support >2TB drives.

Maybe there's a problem with the code used in WUP Installer GX2 because you are nearly getting to 2 TB? Have you tested with the non-GX2 "Y mod" version? (The one with only text in screen, and not UI)

Is that the same as WUP Installer GX2 MOD?

I believe Nintendo stated it could read USB HDD up to 2TB. For example if you have a USB HDD over 2TB like a 4TB USB HDD, it would only read 2TB.

 

[DaTank45]

Is that the same as WUP Installer GX2 MOD?

I believe Nintendo stated it could read USB HDD up to 2TB. For example if you have a USB HDD over 2TB like a 4TB USB HDD, it would only read 2TB.

I believe he is correct on this

 

[Olmectron]

Is that the same as WUP Installer GX2 MOD?

I believe Nintendo stated it could read USB HDD up to 2TB. For example if you have a USB HDD over 2TB like a 4TB USB HDD, it would only read 2TB.

The MOD I'm talking you about has no GUI, it's the pre-GX2 one.

https://gbatemp.net/threads/wupinstaller-y-mod-with-multiple-install-folders.445907/

 

[showdownx]

The MOD I'm talking you about has no GUI, it's the pre-GX2 one.

https://gbatemp.net/threads/wupinstaller-y-mod-with-multiple-install-folders.445907/

I didn't used this one yet. I can give it a try.

 

[oslo83]

My USB HDD is NOT being recognized by WUP Installer GX2, this started happening happened last night. I was able to install games, updates, and DLC's with 'WUP Installer GX2' before, now when I hit the install button I get an error message stating "Error 0xFFFCFFE9 access failed (no USB storage attached)." I'm getting all my content from 'Wii U USB Helper' like I been doing.

The vWii USB HDD works fine. However the Wii U USB HDD is being recognized by the Wii U system, the games still show up on the Wii U menu screen but WUP Installer GX2 don't recognize the drive when I'm trying install games, DLC's and updates. I even tried WUP Installer GX2 Mod version and that one don't work either.
(...)
It's a Toshiba 3TB Powered USB HDD, there is no multiple partitions and I still have 1.5TB of space left on the drive. I used the Original 'Mocha CFW' (...)
I am using a HDD identical to for the vWii side of things as well, my two drives (Wii U and vWii drives) look like identical twins.

Disconnect your vwii drive, then just use ONLY your wiiu drive BEFORE you use WUP installers.
It should solve your problem.

 

[showdownx]

You know what, I found out it was Mocha CFW Fat32 version that was causing that issue. I guess there are some bugs being repaired at the moment.

 

[showdownx]

Haxchi is really smooth. No more mocha for me. Plus WUP Installer GX2 is recognizing my USB HDD again. I had to backed up all my content and re-formatted the drive (using the Wii U of course) put all my content back on the drive. I change my default command to sysmenu on that config file. Once I fired up the Wii U, loaded up HaxchiFW and all games, dlc's and updates were installing smoothly. I'M IN THE GAME!