Toggle sidebar

Hacking 3DS NOOB PARADISE - Ask questions here

  • Thread starter Thread starter Cyan
  • Start date Start date
  • Views Views 5,615,916
  • Replies Replies 54,440
  • Likes Likes 44
So I'm in the middle of getting my OTP part. Dumping my sysnand and emunand but the 2 nands have different sizes 1.84gb and the other is 1.21gb respectively. Is this normal?
 
krisztian1997 said:
I know that, I was curious if I can downgrade it. What is the highest current firmware what can be downgraded anyway ?
Click to expand...
The current firmware is 11.x. You do NOT want to be on that firmware b/c Nintendo went all DEFCON 1 on us and, while I don't know the mechanics, basically cut all forms of downgrading at that firmware except with a hardmod for an indefinite amount of time. Basically, you have one chance now not to screw up the downgrade b/c if it's softbricked and you have to go through recovery mode, then say goodbye to downgrading unless you want a get a hardmod. 10.7 was the last fw version to be able to downgrade through homebrew means.
 
Hello I have some troubles upgrading my 3ds 4.5 to 9.2.
Browserhax DOES NOT work always gives me an error.
I can load Rxtools and go into RXmode but that's seem useless. I have FBI installed on health and safety on emunand but cia i install diseapear.
The only thing i want to do is load sysupdater to have access to menuhax. any clues?
 
wewe7144 said:
This is just in case. However this is weird as mine seems to be the same size even after I tried to back up multiple times.
Click to expand...
If your actual sysNAND is already the smallest possible size, then it can't be cut down anymore by redNAND. If it was the biggest size sysNAND, then it's possible you setup emuNAND, rather than redNAND, both are similar and using either allows you to complete the guide just fine.
 
Have some questions so basically first one is plialect says in his guide that if your on n3ds you should overclock it with luma which I did it seems fine so far but just wondering is it fully safe? Another thing is I installed a theme shuffling cia on my 3ds with a program I found on the temp do you know where those cias would be stored so I can delete them or just something else so I can delete them? Another thing do you guys have any cool sans themes for the homemenu Or homebrew menu or a custom animation for bootanim9 :D???:yay3ds::yay3ds::yay3ds::yay3ds:
 
TheVinAnator said:
Have some questions so basically first one is plialect says in his guide that if your on n3ds you should overclock it with luma which I did it seems fine so far but just wondering is it fully safe? Another thing is I installed a theme shuffling cia on my 3ds with a program I found on the temp do you know where those cias would be stored so I can delete them or just something else so I can delete them? Another thing do you guys have any cool sans themes for the homemenu Or homebrew menu or a custom animation for bootanim9 :D???:yay3ds::yay3ds::yay3ds::yay3ds:
Click to expand...
Some people have reported issues with some games with the overclock, you'll just have to test it, but it only impacts battery life by around 5%.

As for the themes thing, use CHHM2 and 3DSThem.es.
Links: https://gbatemp.net/threads/release-chmm2-custom-home-menu-manager-2.397543/
https://3dsthem.es/?q=sans
 
Temptress Cerise said:
Some people have reported issues with some games with the overclock, you'll just have to test it, but it only impacts battery life by around 5%.

As for the themes thing, use CHHM2 and 3DSThem.es.
Links: https://gbatemp.net/threads/release-chmm2-custom-home-menu-manager-2.397543/
https://3dsthem.es/?q=sans
Click to expand...
nah no issues for well over a week and I can use chmm2 to delete the cia I installed it was a tool by the creator of soon2 I believe it was called the howling theme tool and you would get themes pack it as a cia and install? and 3dsthemes has animations?
EDIT: a bit off topic but nice pc specs O,o lmao
 
Last edited by ,
TheVinAnator said:
nah no issues for well over a week and I can use chmm2 to delete the cia I installed it was a tool by the creator of soon2 I believe it was called the howling theme tool and you would get themes pack it as a cia and install? and 3dsthemes has animations?
EDIT: a bit off topic but nice pc specs O,o lmao
Click to expand...
You'll need to uninstall the Howling Theme Tool using a CIA manager, like FBI/DevMenu//BBM//etc. CHHM2 is just another way to get custom themes. As far as I'm aware 3dsthemes doesn't have bootanim9 animations. You'll have to make them yourself.

Off-topic: Thanks! Used to be big on PC Gaming, but have calmed down now lol :)
 
Temptress Cerise said:
You'll need to uninstall the Howling Theme Tool using a CIA manager, like FBI/DevMenu//BBM//etc. CHHM2 is just another way to get custom themes. As far as I'm aware 3dsthemes doesn't have bootanim9 animations. You'll have to make them yourself.

Off-topic: Thanks! Used to be big on PC Gaming, but have calmed down now lol :)
Click to expand...
howling theme tool is a pc thing tho thats what im trying to say all i did was go up into fbi and install the cia I packed, and I just read somewhere that bootanim9 screws with lumas patches and you have to use the pathchanger thing would you know how that works?
 
Last edited by ,
Hello, if anyone sees this :ph34r:

I've ordered a N3DS XL which I plan to run A9LH on, question is, what is a good program to use for moving files back and forth on the SD Card? As ive seen its different compared to the O3DS regarding taking out the mSD. Is there any easy-noob friendly homebrew out there?

Thanks!~
 
proflayton123 said:
Hello, if anyone sees this :ph34r:

I've ordered a N3DS XL which I plan to run A9LH on, question is, what is a good program to use for moving files back and forth on the SD Card? As ive seen its different compared to the O3DS regarding taking out the mSD. Is there any easy-noob friendly homebrew out there?

Thanks!~
Click to expand...
I just kept the back screwed off until I was done so just pop it in and out its so easy just get a proper sized screwdriver and loosen the two screws (they are specially made so they woont come out) and then just use your nail to pop it off at the little area at the top sides of each it really is noob friendly if you dont understand just google it plus its a lot faster this way
 
TheVinAnator said:
I just kept the back screwed off until I was done so just pop it in and out its so easy just get a proper sized screwdriver and loosen the two screws (they are specially made so they woont come out) and then just use your nail to pop it off at the little area at the top sides of each it really is noob friendly if you dont understand just google it plus its a lot faster this way
Click to expand...

Hmm, well, okay thank you for this suggestion ^~^
 
proflayton123 said:
Hmm, well, okay thank you for this suggestion ^~^
Click to expand...
no problem was that clear enough i can put it better if you need lol was just quickly typing and the part where you put your nail just to get a better idea it is on the left and right of the back directly under the l and r buttons and then just an inch to the left and or right
 

Site & Scene News

Go to forum More news

Popular threads in this forum

Homebrew app Emulator  [Release] 3DS-CLI - Run a real RISC-V Linux environment on the Nintendo 3DS

Help on 3DS prices...

Hardware  2 Broken 3DSes, need help

Website for finding alternative games for 3DS

GodMode9 wont launch, holding START just goes to home screen

Homebrew  My Secret World DS: is there a way to bypass the password lock?

please help, wont boot

Homebrew Homebrew app  [Release] GridLauncher Rosalina