Hacking [Release] rxTools - Roxas75 3DS Toolkit [fw 2.0 - 9.2]

[AkGBA]

Thanks, but the installation fails,too.

EDIT: To specify, I'm looking for the lastest build that doesn't fail at installation.

EDIT2: I read that this build was the newest one that worked. Does anyone have that build?

What are you looking for ? A9lh builds ? Check out a few pages before this one, and don't forget to install it via a 9.0/9.2 NAND. Then you're good to go with a9lh.
Regular builds ? http://signaturedestroyer.azurewebsites.net/ . These one work.

Edit : about the a9lh build : here it is : https://mega.nz/#!kA9QmDqa!hXv3v9xhDSLuOaaLnBX_rJ9ZdBxdSLm5aVSVnTXiF9k

 

[Hyura]

Thanks, but the installation fails,too.

EDIT: To specify, I'm looking for the lastest build that doesn't fail at installation.

EDIT2: I read that this build was the newest one that worked. Does anyone have that build?

So, I'm still learning how to do this, but I compiled the commit you asked. Or at least I tried, haha.

Let me know if it works.

https://mega.nz/#!1pNVVBhR!JT7dbQ9tghgem3rVcdZHgCSlm1HJ66_lsXGjX_5qqaI

 

[reiyu]

does anyone know if the latest commit fixed DSiWare in Emunand for n3DS?

 

[Billy Acuña]

Edit : about the a9lh build : here it is : https://mega.nz/#!kA9QmDqa!hXv3v9xhDSLuOaaLnBX_rJ9ZdBxdSLm5aVSVnTXiF9k

What's new?

 

[SignatureDestroyer]

Nice ! You might want to use GitHub APIs to build a nightly every x commits so it doesn't build a nightly if nothing changed since the last

Good idea. I updated it so it only builds when a change is detected. It will post a new build within 5 minutes of any commit.

 

[ccfman2004]

How easy would it be to modify rx to boot a 2.1.0 emuNand? This way we don't have to risk downgrading sysNand to get the OTP. Just wondering.

 

[Shadow#1]

How easy would it be to modify rx to boot a 2.1.0 emuNand? This way we don't have to risk downgrading sysNand to get the OTP. Just wondering.

Others have said that will not work as the part that's needed to get the OTP is still locked on the 3ds and the fw has to be 2.1 on the hardware itself

 

[ccfman2004]

Others have said that will not work as the part that's needed to get the OTP is still locked on the 3ds and the fw has to be 2.1 on the hardware itself

That makes sense to me now since even if running a 9.2 emuNand you still need the slots bin file if your sysNand is less than 7.

Just a thought.

Anyhoo just got my OTP on my NES 3DS XL. Now to get rxTools running on it (can't remember the last time I actually used sysNand to do anything other than to load MenuHax.)

EDIT: Just got the arm9loaderhax installed and wow does it boot emuNand fast. Now I just got to get rid of the rxTools splash screen and you won't know the difference except for the System Settings version string but I don't want to change that as it's the only way I know I'm in emuNand.

 

[Hyura]

That makes sense to me now since even if running a 9.2 emuNand you still need the slots bin file if your sysNand is less than 7.

Just a thought.

Anyhoo just got my OTP on my NES 3DS XL. Now to get rxTools running on it (can't remember the last time I actually used sysNand to do anything other than to load MenuHax.)

EDIT: Just got the arm9loaderhax installed and wow does it boot emuNand fast. Now I just got to get rid of the rxTools splash screen and you won't know the difference except for the System Settings version string but I don't want to change that as it's the only way I know I'm in emuNand.

Are the NANDs still unlinked with the OTP?

If they are you can always use different themes :x

I want to do it, but I'm afraid to brick my Old 3DS as I still don't have a hardmod.

 

[ccfman2004]

Are the NANDs still unlinked with the OTP?

If they are you can always use different themes :x

I want to do it, but I'm afraid to brick my Old 3DS as I still don't have a hardmod.

The OTP is just a console unique number and has nothing to do with Nand linking. My Nands were never linked to begin with as it's the first thing I do after creating an emuNand and they were still unlinked after installing arm9loaderhax. The only way for them to get re-linked is if I re-install emuNand.

I was nervous too but as long as you have a good sysNand backup, you can always install a hard mod later if you brick.

I have MenuHax installed in sysNand so if I want some homebrew, I hold L when booting an launch sysNand.

I almost crapped in my pants after I installed the arm9loaderhax. The first boot my screen said "Failed!". Then I realized, you idiot, you forgot to install the compatible version of rxTools. I already had the arm9loaderhax.bin copied.

Unfortunately there is no way to get your OTP using emuNand as sysNand has to be low enough to get it.

The hardest part was compiling the arm9loaderhax installer as I had to create a virtual machine to install Windows into it as I could never get 3DS homebrew to compile on a Mac nor Wii homebrew for that matter.

I like that I can change system settings without having to reload MenuHax and prey that rxTools (or MenuHax for that matter) loads as it frequently doesn't when I exit System Settings.

I'm thinking that we should use a shortcut when the Decrypt9 can be launched from rxTools. Maybe R.

arm9loaderhax + rxCFW(rxPasta) are a match made in heaven.

 

[Hyura]

The OTP is just a console unique number and has nothing to do with Nand linking. My Nands were never linked to begin with as it's the first thing I do after creating an emuNand and they were still unlinked after installing arm9loaderhax. The only way for them to get re-linked is if I re-install emuNand.

I was nervous too but as long as you have a good sysNand backup, you can always install a hard mod later if you brick.

I have MenuHax installed in sysNand so if I want some homebrew, I hold L when booting an launch sysNand.

I almost crapped in my pants after I installed the arm9loaderhax. The first boot my screen said "Failed!". Then I realized, you idiot, you forgot to install the compatible version of rxTools. I already had the arm9loaderhax.bin copied.

Unfortunately there is no way to get your OTP using emuNand as sysNand has to be low enough to get it.

The hardest part was compiling the arm9loaderhax installer as I had to create a virtual machine to install Windows into it as I could never get 3DS homebrew to compile on a Mac nor Wii homebrew for that matter.

I like that I can change system settings without having to reload MenuHax and prey that rxTools (or MenuHax for that matter) loads as it frequently doesn't when I exit System Settings.

I'm thinking that we should use a shortcut when the Decrypt9 can be launched from rxTools. Maybe R.

arm9loaderhax + rxCFW(rxPasta) are a match made in heaven.

I still don't know how arm9loaderhax works, but it seems like you can use my suggestion and use different themes

My boot rate is OK, so I'm still holding back on reading about the a9lhax xD

And about the hardmod, I'd have to send my console to someone that knows how to do it. I don't have the equipment needed (my soldering iron is way too big). But I'll do it asap (:

 

[ccfman2004]

Any chance someone can make me a blank image file for the top screen of the 3DS? I want that screen not to show the Welcome to rxTools splash. I tired on my Mac but I get syntax errors with the theme script.

 

[Madridi]

It has to do with the fact that these newer eShop games use seed decryption. By visiting the game's eShop page, the games' seed is added to you seeddb.bin so the 3DS can decrypt the game. There are ways of using Decrypt9 to update the seeddb with the new keys but I can't discuss that here as it's considered piracy which is against the forum rules.

Sorry old post I know. Just a quick question, this is only for emunand though right? I mean, the following scenario is not possible correct?:
Using sysnand 9.2, latest emunand, using seeddb.bin from emunand to update the new keys for sysnand.

Maybe I'm a bit off on how it works cause I never used it, but I guess you get the gist of my question

 

[ccfman2004]

Seed decryption was not introduced until 9.6.

 

[Madridi]

Seed decryption was not introduced until 9.6.

Oh but I thought that was the reason why some games hang on the 3ds logo screen on 9.2

 

[ccfman2004]

Oh but I thought that was the reason why some games hang on the 3ds logo screen on 9.2

It is as the 3DS doesn't know how to decrypt the game.

 

[naivegirl2411]

I have a problem installing rxtools on my o3ds. Ive been following this guide: https://gbatemp.net/threads/tutorial-installing-rxtools-custom-firmware-3ds-and-2ds.390867/ so far and managed to get my 9.2 nand.bin but I seem to have a problem on the next step where I have to find out if rxtools is working (Im using the rxtools files provided so far by AidanLumina). When I launch rxtools from HBL (oothax 2.6) I get 2 black screens. What does this mean and is there a way to fix it?

 

[SomeGamer]

I know that feeling, I love that too
I've an A9LH setup with CtrBootManager who can boot to UnCart, EmuNAND9, Decrypt9, AuReiNand, ReiNand and CakesFW (main CFW), can't wait for RxTools to have them all

Can I have the links of these?

 

[Queen of SoS]

Okay I need help I'm trying to boot into HBL via Sliderhax but it isn't working at all. So, do I need to go out and buy a game and then update it and try again or what. My 3ds just freezes every time when I press the slider and it never goes past that. Firm Ver. 2.2.0 4U

 

[A_Random_Guy]

Okay I need help I'm trying to boot into HBL via Sliderhax but it isn't working at all. So, do I need to go out and buy a game and then update it and try again or what. My 3ds just freezes every time when I press the slider and it never goes past that. Firm Ver. 2.2.0 4U

There is no homebrew payload for 2.2.0 . Only for 9.0+