Hacking Hardware Picofly - a HWFLY switch modchip

[twins333]

thanks i will try it. Another question: i have a full backup of another oled. Could i use restore boot0 and boot1 from this backup, or is this also tied to every specific console?

Why would you need boot0/1 from another console? just generate new ones. The most important parts are the prodinfo keys wich you don't need for boot.

 

[Eds05]

Hey guys, I want to improve my services, I would like to buy an oled to try the kamikaze mod (and not on one of my client yet), I have all the equipment to work clean but I don’t have a driller.

It start to be important to do it, I fixed 2 oled from my previous clients because of a shitty dat0 adapter, I have the feeling that its really hard to find good ones. Luckily most of my clients want to mod v1/v2. But I really want to do the kamikaze mod with mask it will be perfect! Im not comfy to reball, I would like to invest in a reball machine later.

Which driller should I buy ? I was thinking to buy a wireless Dremel, but which element I need to reach the dat0 point ? Which diameter of the drill ball (if we can call it like that)

My last installation, but I really want to get rid of of this dat0 adaptor and do it permanently.

 

[Dee87]

Hey guys, I want to improve my services, I would like to buy an oled to try the kamikaze mod (and not on one of my client yet), I have all the equipment to work clean but I don’t have a driller.

It start to be important to do it, I fixed 2 oled from my previous clients because of a shitty dat0 adapter, I have the feeling that its really hard to find good ones. Luckily most of my clients want to mod v1/v2. But I really want to do the kamikaze mod with mask it will be perfect! Im not comfy to reball, I would like to invest in a reball machine later.

Which driller should I buy ? I was thinking to buy a wireless Dremel, but which element I need to reach the dat0 point ? Which diameter of the drill ball (if we can call it like that)

My last installation, but I really want to get rid of of this dat0 adaptor and do it permanently.

Why would u want to try the kamikaza mode?

Just get reballing stuff , and learn how to reball its not hard and the proper way to do it.

U need a stencil, past and a hotair station.

Drilling in boards is not the way to go if there are

 

[snaker]

Guys anyone knows the value of this resistor. Today arrived a bombed switch OLED.

 

[deeps]

Guys anyone knows the value of this resistor. Today arrvied a bombed switch.

I like how someone has been grinding, but missed the clk point entirely

 

[Dee87]

Hey guys, I want to improve my services, I would like to buy an oled to try the kamikaze mod (and not on one of my client yet), I have all the equipment to work clean but I don’t have a driller.

It start to be important to do it, I fixed 2 oled from my previous clients because of a shitty dat0 adapter, I have the feeling that its really hard to find good ones. Luckily most of my clients want to mod v1/v2. But I really want to do the kamikaze mod with mask it will be perfect! Im not comfy to reball, I would like to invest in a reball machine later.

Which driller should I buy ? I was thinking to buy a wireless Dremel, but which element I need to reach the dat0 point ? Which diameter of the drill ball (if we can call it like that)

My last installation, but I really want to get rid of of this dat0 adaptor and do it permanently.

For the future if u install the rp2040 tiny like this it looks a bit cleaner

 

[twins333]

We have an issue with a v1, error:
==* CPU always reach BCT check (no glitch reaction, check mosfet)
Pics of the install and vid here:

 

[abal1000x]

We have an issue with a v1, error:
==* CPU always reach BCT check (no glitch reaction, check mosfet)
Pics of the install and vid here:

I am quite confused, why you soldered the S and the gate together.

 

[Dee87]

We have an issue with a v1, error:
==* CPU always reach BCT check (no glitch reaction, check mosfet)
Pics of the install and vid here:

u really wonder why ? check the guide how u are supposed to solder the mosfet properly.

but ur issue is like @abal1000x already said S and gate .

 

[twins333]

I'm working with second hand info and I was hoping the source and gate weren't bridged. Thanks for the quick reply and confirmation.

This should work, but we get the same error. There's another mosfet with the same orientation, for reference.

 

[Dee87]

I'm working with second hand info and I was hoping the source and gate weren't bridged. Thanks for the quick reply and confirmation.

This should work, but we get the same error. There's another mosfet with the same orientation, for reference.

now im gonna be honest i tried it a few times with 1 mosfet on the back of the board i only got it one time working but very slow glitch.

just use 2 on the apu and u will be fine

or maybe u destroyed the mosfet will bridging not sure if that is possible

 

[Dk2022]

What is resistance and size this resistor?

 

[jkyoho]

What is resistance and size this resistor?

4.7k_0201

Post automatically merged: Aug 9, 2023

now im gonna be honest i tried it a few times with 1 mosfet on the back of the board i only got it one time working but very slow glitch.

just use 2 on the apu and u will be fine

or maybe u destroyed the mosfet will bridging not sure if that is possible

Are you using 8342 mosfet?

 

[twins333]

We already changed 3 mosfets. The plot thickens. It seems that there was another person that tried to mod it and failed, the switch always boots to ofw. Already tried with a ribbon. Will try @Dee87's suggestion with two mosfets on the apu and will keep you updated.

Edit: Used these mosfets, which worked with other switches:
https://a.aliexpress.com/_EHg6lY7

 

[snaker]

Guys anyone knows the value of this resistor. Today arrived a bombed switch OLED.

Switch boots fine without this resistor. Does anyone know the use of it?

 

[FreeLander]

I did enough reballing to be comfortable with the green adaptor, but Which goes first? Should I solder the adaptor to the board then the emmc to the adaptor? Or the other way around? Thanks!

 

[deeps]

I did enough reballing to be comfortable with the green adaptor, but Which goes first? Should I solder the adaptor to the board then the emmc to the adaptor? Or the other way around? Thanks!

yes, green adapter to board, then emmc to green adapter.

 

[Eds05]

Why would u want to try the kamikaza mode?

Just get reballing stuff , and learn how to reball its not hard and the proper way to do it.

U need a stencil, past and a hotair station.

Drilling in boards is not the way to go if there are

Do you have a nice kit from aliexpress to advice ?

 

[twins333]

Do you have a nice kit from aliexpress to advice ?

Literally 4 pages back:

https://a.aliexpress.com/_EHO57iX

Post automatically merged: Aug 7, 2023

No matter about time. Im a hobbyst and i have a seven months children.

 

[snaker]

Literally 4 pages back:

Just ordered one! Thanks.