Hacking SWITCH NOOB PARADISE - Ask questions here

[PercuOcto]

Nothing prevents you from playing CFW/Sysnand Online right now. You will have to take responsibility for ensuring you’ve not done anything that Ninty might take offense to and ban your Switch. Be safe!

I was wondering because the dnstester says blocked on cfwsysnand.

 

[binkinator]

I was wondering because the dnstester says blocked on cfwsysnand.

You will need to disable the protections you put in place.

Information wants to be free. What you do with that information is up to you.

e: it looks like I already share this information with you earlier. The same ban warnings and caveats apply of course!

https://gbatemp.net/threads/switch-noob-paradise-ask-questions-here.488277/page-1924#post-10083829

 

[PercuOcto]

You will need to disable the protections you put in place.

Information wants to be free. What you do with that information is up to you.

e: it looks like I already share this information with you earlier. The same ban warnings and caveats apply of course!

https://gbatemp.net/threads/switch-noob-paradise-ask-questions-here.488277/page-1924#post-10083829

Thanks! I forgot you already sent that.
I found a way around. I don't need to be online on cfw I can just do the thing with jksv on cfw and then connect to the internet using stock because thankfully the share files.
I just did that, hopefully what I just did is harmless and Nintendo doesn't ban me for doing it.

 

[binkinator]

Thanks! I forgot you already sent that.
I found a way around. I don't need to be online on cfw I can just do the thing with jksv on cfw and then connect to the internet using stock because thankfully the share files.
I just did that, hopefully what I just did is harmless and Nintendo doesn't ban me for doing it.

Glad you’re sorted. Enjoy!

 

[Draxzelex]

i got another sd card same problem will try tinwoo now lets see should i install the new atmosphere my firmware is 14.1.1

Well, there's nothing wrong with using the latest version of Atmosphere. Who knows, maybe somehow the issue is related to Atmosphere which is unlikely but not impossible.

 

[binkinator]

Well, there's nothing wrong with using the latest version of Atmosphere. Who knows, maybe somehow the issue is related to Atmosphere which is unlikely but not impossible.

Hey @Draxzelex …he started a dupe thread over here:

https://gbatemp.net/threads/want-to-start-over.626820/

His switch is in 1-bit mode. Nothing will save him short of fixing the hardware.

 

[Draxzelex]

Hey @Draxzelex …he started a dupe thread over here:

https://gbatemp.net/threads/want-to-start-over.626820/

His switch is in 1-bit mode. Nothing will save him short of fixing the hardware.

Ugh, I absolutely hate it when they do that. Watch, he's going to make another thread where he asks for alternatives on how to fix it or what to do when he botches the repair job.

 

[binkinator]

Ugh, I absolutely hate it when they do that. Watch, he's going to make another thread where he asks for alternatives on how to fix it or what to do when he botches the repair job.

He does seem to persist with his own world view even while asking for help.

I don’t think I’m going to take you up on your bet. You’ll win for sure.

 

[TheRaptor]

Move/rename /atmosphere/contents to /atmosphere/contents.bk (if you have it…if not no worries)

Make sure you download fusee.bin from Atmosphere github and place it in /bootloader/payloads/

If that doesn’t fix it, then yeah…prolly best to wait.

I had the same problem after updating to firmware 16.0.0 and it works when you delete the contents folder. Thank you @binkinator

 

[binkinator]

I had the same problem after updating to firmware 16.0.0 and it works when you delete the contents folder. Thank you @binkinator

Thanks for reading the history, man! Good stuff. Glad you’re sorted! Enjoy!

 

[DaddyDingDong]

Hi, I have a V1 switch that I have the latest Hekate/Atmosphere on and all of a sudden after the update I get an error when trying to play an official cartridge in both stock mode and in cfw mode. Any ideas why?

 

[binkinator]

Hi, I have a V1 switch that I have the latest Hekate/Atmosphere on and all of a sudden after the update I get an error when trying to play an official cartridge in both stock mode and in cfw mode. Any ideas why?

Check nogc and autonogc setting in Hekate and Atmosphere to enable/disable GC (Game Card)

Autonogc settings are set up in Hekate based on this doc:

https://github.com/CTCaer/hekate#hekate-global-configuration-keysvalues-when-entry-is-config

Nogc setting are setup in Atmosphere based on this doc:

https://github.com/Atmosphere-NX/Atmosphere/blob/master/docs/features/configurations.md

 

[kap10nuka]

Any chance the switch could output with a usb-c to hdmi without being plugged in?

 

[linuxares]

Well shit, man. We just had to go there. I’ve gone out of my way to be sure to be respectful at all times with all things considered. I don’t think the person meant it that way, but I can understand why it could be taken that way.

I’ve been watching the usual spot where it’s been released and it’s just been sitting there at 493 for days after the update and I knew there would need to be FS changes. Was hoping folks were just busy and not pissed off. Alas…

View attachment 355761

Thanks for posting this crucial update!

I will make note of it in my Russian speaking people friendly download link and hope fences can be mended soon!

Dbi is imho one of the best software for the Switch (Great Russian software! Like Tetris that is probably my nr 1 game of all time).

No idea why they got angry at me when it was just the 4fir Bros attacking threads and posting in Russian. I had to put my boot down and it worked. The 4fir spamming stopped.

 

[Adran_Marit]

Dbi is imho one of the best software for the Switch (Great Russian software! Like Tetris that is probably my nr 1 game of all time).

No idea why they got angry at me when it was just the 4fir Bros attacking threads and posting in Russian. I had to put my boot down and it worked. The 4fir spamming stopped.

Have I missed scene drama?!?

 

[linuxares]

Have I missed scene drama?!?

Not really? Not sure myself

 

[Skeet1983]

Hi, I have a V1 switch that I have the latest Hekate/Atmosphere on and all of a sudden after the update I get an error when trying to play an official cartridge in both stock mode and in cfw mode. Any ideas why?

Hey. Were you able to fix the gamecard issue? I am wanting to update my V1 Switch to FW16 so I can play Metroid and Kirby on gamecards. Last time, I had to update my V1 Switch to latest FW because I got a message saying game won't be added to home screen until system is updated. Thoughts and help appreciated

 

[Draxzelex]

Hey. Were you able to fix the gamecard issue? I am wanting to update my V1 Switch to FW16 so I can play Metroid and Kirby on gamecards. Last time, I had to update my V1 Switch to latest FW because I got a message saying game won't be added to home screen until system is updated. Thoughts and help appreciated

Metroid Prime Remastered was released more than a week before firmware 16.0 and while Kirby was released shortly afterwards, the cartridges logically would have to have been prepared weeks in advanced well before the firmware was released. Why on Earth would those games need a firmware that literally just released when they were completed a long time before firmware 16.0?

 

[binkinator]

Hello, got another question, after I shut down my switch and rebooted it after a time, the CFW (emunand) didn't show up and I think it was the OFW/Stock ROM. Is that normal? Or is it the stock ROM so I just need to change it with Hekate again?
Or could that be the CFW sysnand?
Also another question again, could I get banned if I use the stock ROM or after shut down and reboot the ?FW, if that is the legit Switch Firmware?

Please post a screenshot of your System Setting —> System —> System Update.



Please post the contents of your /bootloader/hekate_ipl.ini file.

 

[Skeet1983]

Metroid Prime Remastered was released more than a week before firmware 16.0 and while Kirby was released shortly afterwards, the cartridges logically would have to have been prepared weeks in advanced well before the firmware was released. Why on Earth would those games need a firmware that literally just released when they were completed a long time before firmware 16.0?

I am concerned because last time I went to play a new game cart (pkmn violet), I got message on switch saying I need to update system before game add to home screen. Concerned same happen if I get metroid and Kirby. My v1 switch is still on fw 15x.

Sent from my SM-N981U using Tapatalk