1. mattytrog

    OP mattytrog You don`t want to listen to anything I say.
    Member

    Joined:
    Apr 27, 2018
    Messages:
    3,657
    Country:
    United Kingdom
    Excellent feedback sir!

    I'm genuinely grateful. Thought I'd ironed out all red artefacts :( yep easily sorted.

    Noted about the switch red colour.

    The only thing that disappears is the "buttons" legend. It is a single asset.

    My logic was people only need to see it the once. O they than that, keep it a stock look.

    Should I keep it showing all the time? I can do.

    I'm really enjoying doing this. A few tinnies and notepad++ is a good evening for a middle aged idiot!

    I just need to know what to improve. But that few people use this, or a chip, it's hard getting feedback!
     
    peteruk likes this.
  2. peteruk

    peteruk GBAtemp Addict
    Member

    Joined:
    Jun 26, 2015
    Messages:
    2,245
    Country:

    I think your work is amazing and I am sincerely VERY grateful - perhaps you'd consider adding that vol + option as standard for everybody to have the option to boot a 2nd payload - it's brilliant mate !!
     
    mattytrog likes this.
  3. mattytrog

    OP mattytrog You don`t want to listen to anything I say.
    Member

    Joined:
    Apr 27, 2018
    Messages:
    3,657
    Country:
    United Kingdom
    I could do. But what about if people run bootloader/update.bin?

    I thought about putting it on VOL-. But then it starts getting complicated.

    If people hold down VOL+ or VOL- for too long, autoboot is overridden and it goes to SXOS / Hekate / Nyx menu.

    I don`t know. I don`t really use the bloody things!

    Would VOL+ for payload1(or payloadx) work for everybody?
    Would VOL- for bootloader/update.bin work for everybody?

    I just worry that it will get too confusing for people thats all. Will definitely put it in a special though. Got a bugfix to do on that special. Red background text is coming up red. Bloody artefact. Thought id shotgunned all those...
     
    peteruk likes this.
  4. peteruk

    peteruk GBAtemp Addict
    Member

    Joined:
    Jun 26, 2015
    Messages:
    2,245
    Country:
    Just my 2 penneth worth for what it's worth

    Having read what you've just written and bearing in mind the whole idea of this version of the suite is to keep things as straight forward as possible I just wanted to say that adding options on vol + and vol - is not really that complicated - if you think about it it's not any more complicated than 3ds Luma users who hold down Start to enter godmode9 or other button combinations. Luma is a CFW for people of all levels including complete noobs

    Perhaps put it to a poll and see what people want ?
     
  5. mattytrog

    OP mattytrog You don`t want to listen to anything I say.
    Member

    Joined:
    Apr 27, 2018
    Messages:
    3,657
    Country:
    United Kingdom
    Could put it to a poll, but probably only me and would vote in it Pete.

    Never used Godmode9. I think I installed it on someones DS. Or was it 3DS? Forgive my ignorance. But I don`t remember.
     
    peteruk likes this.
  6. feral

    feral Member
    Newcomer

    Joined:
    Feb 24, 2019
    Messages:
    28
    Country:
    United States
    Having the buttons legend persist would be nice. I thought it locked up or I did something wrong the first time I didn't see it. Would also be good for the people who hardly ever use this boot menu since they might forget what buttons do what from the main screen.

    FWIW regarding payloads, I'm indifferent on that topic since I just use Hekate as my payload.bin and chainload whatever I want from there.

    EDIT: I forgot to mention Hekate already uses Vol - to enter the menu, so as long as this doesn't interfere I could go either way.
     
    Last edited: Jan 3, 2020
    peteruk likes this.
  7. mattytrog

    OP mattytrog You don`t want to listen to anything I say.
    Member

    Joined:
    Apr 27, 2018
    Messages:
    3,657
    Country:
    United Kingdom
    Thats what I assumed people would do.

    OK what I`ve done for v5.1 (it will be "finished". at least one fookin day) is:

    Fix text BG asset showing red bug
    Changed the button legend graphic(for controls) to persist across main screen
    Change red bootlogo asset to E60012, Stock Switch red colour.

    Manual override option added...
    PWR + VOL- boots bootloader/update.bin(mirrors Hekate VOL- to enter menu, so should be seamless)
    PWR + VOL+ boots payload1.bin (or payloadx.bin), for SXOS users maybe? Also seamless...

    Nothing else changed. Everything still autoboots etc... Just a usability improvement.
     
    metaljay, peteruk and feral like this.
  8. metaljay

    metaljay GBAtemp Fan
    Member

    Joined:
    Jan 10, 2012
    Messages:
    445
    Country:
    @mattytrog
    As I am not sure what I am typing explains what I mean, I've done a picture haha.

    I use Komos (as I rarely use the switch anymore so its easy for lazy people who forget) so pressing Vol - boots into Hekate.

    [​IMG]
     
    mattytrog likes this.
  9. mattytrog

    OP mattytrog You don`t want to listen to anything I say.
    Member

    Joined:
    Apr 27, 2018
    Messages:
    3,657
    Country:
    United Kingdom
    I did yours in red! I`m sure I did.
     
  10. metaljay

    metaljay GBAtemp Fan
    Member

    Joined:
    Jan 10, 2012
    Messages:
    445
    Country:
    I haven't installed V5 yet, I was saying for 5.1 that you are working on mate
     
  11. mattytrog

    OP mattytrog You don`t want to listen to anything I say.
    Member

    Joined:
    Apr 27, 2018
    Messages:
    3,657
    Country:
    United Kingdom
    Ohhhhh...

    I see...

    Working on it as we speak.
     
  12. metaljay

    metaljay GBAtemp Fan
    Member

    Joined:
    Jan 10, 2012
    Messages:
    445
    Country:
    @mattytrog weirdly, I cannot get the chip to go back to dual boot after installing V5.
    Holding down vol + until first flash in both RCM, emuMMC and your info page doesn't change it from chip based.

    Maybe a bug?
     
  13. mattytrog

    OP mattytrog You don`t want to listen to anything I say.
    Member

    Joined:
    Apr 27, 2018
    Messages:
    3,657
    Country:
    United Kingdom
    Hmmm... Working here.

    emmc based autoRCM isnt enabled is it?
     
    peteruk likes this.
  14. peteruk

    peteruk GBAtemp Addict
    Member

    Joined:
    Jun 26, 2015
    Messages:
    2,245
    Country:
    V5_030120 eta when - june 15th ?

    you're not allowed a life :rofl2:
     
    mattytrog likes this.
  15. metaljay

    metaljay GBAtemp Fan
    Member

    Joined:
    Jan 10, 2012
    Messages:
    445
    Country:
    I don't have autoRCM enabled, have you flashed the red version of V5 to your trinket? I cannot get it to switch to dual boot, only chip based RCM. Tried setting from emuMMC, RCM and OFW (via hekate) but still doesn't change from chip based.

    unrelated: Can you do 2 variants of your V5.1? With boot logo and without, I know it only adds a second but give people the option to have without :)
    Might also be worth changing the text from "Browse" to "Tools" as you have all your payload management setup there along with restore eMMC

    See my quick video here:
     
    Last edited: Jan 3, 2020
  16. mattytrog

    OP mattytrog You don`t want to listen to anything I say.
    Member

    Joined:
    Apr 27, 2018
    Messages:
    3,657
    Country:
    United Kingdom
    You held it down too long. See it turn green at the last second?
    It turned green because that is the next colour in the sequence.

    Let go during the flash...

    — Posts automatically merged - Please don't double post! —

    Phew... Right...

    V5_030120...

    Changelog...

    So much for not many updates!

    override enabled for VOL- / VOL+ (update.bin on VOL-, payloadx on VOL+)
    Background text fixed in info
    Red changed to original Switch red.
    Sped up boot for animation users
    Bugfixes...
     
    peteruk likes this.
  17. mattytrog

    OP mattytrog You don`t want to listen to anything I say.
    Member

    Joined:
    Apr 27, 2018
    Messages:
    3,657
    Country:
    United Kingdom
    V5_030120 uploaded...

    If any issues with it, I`ll be in Iran. Hiding.

    ;)
     
    peteruk likes this.
  18. popy

    popy GBAtemp Regular
    Member

    Joined:
    Jul 31, 2018
    Messages:
    120
    Country:
    Austria
    @mattytrog : thx for v5.
    Please dont blame me but i dont get whats "blink 3" mode is?
    Yes, i have read you OP, and also successfully changes autoRCM & broucgth the chip into Update mode (4 blinks and release).

    But please can you exlain in detail how i can change the bootlogo to animated red in v5?

    thx
    pOpY
     
  19. mattytrog

    OP mattytrog You don`t want to listen to anything I say.
    Member

    Joined:
    Apr 27, 2018
    Messages:
    3,657
    Country:
    United Kingdom
    OK... I changed the timings slightly. Forgot to put in OP.

    Anyway, you know how you changed from dual boot to autoRCM or visa-versa?

    Well... Keep holding. Other rapid blinks follow. Let go on the one you want.

    1) Hold down VOL+. Nothing willappear to be happening chip-side... Keep holding...

    2) LED will light... Keep holding...

    3) LED will rapid blink (this is dualboot / autoRCM switch)... Keep holding

    4) After a few more seconds another blink(this is for payload1.bin, payload2.bin selection)...Keep holding

    5. Next, you will see yet ANOTHER blink, just like in step 4... only this time, we need to let go DURING the blink.

    OK...You have let go...

    You will see small blinks counted out...
    1

    then 2 blinks

    then 3 blinks etc...

    Blink 1 is Black, non-animated
    Blink 2 is Black animated
    Blink 3 is Red non-animated
    Blink 4 is Red animated.

    Hit VOL+ on your chosen "blink".

    Done.
     
    popy and peteruk like this.
  20. iriez

    iriez GBAtemp Advanced Fan
    Member

    Joined:
    Oct 27, 2016
    Messages:
    512
    Country:
    United States
    Just used v5! Totally freaking sweet. This is exactly what I wanted. Thanks so much Mattyrog, great work.
     
    mattytrog and peteruk like this.
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - Fusee_Suite, [Trinket], Software]