Hardware Switch wont power on, making buzzing noise coming from the motherboard

[Patapon3321]

This (resistor) has 2.7~3.3ohm resistance by me

 

[NaniMael]

That resistor is low ohm’s or even 0 ohm’s not sure but it will buzz your multimeter if your using it to test for shorts.

Check the big coil next to bq24193 if your getting humming

thanks! bq24193 coil no problem

slow charging, no power..

 

[Winnppl]

Ok guys, I finally got a new multimeter and found a capacitor that is shorting

where should I go now?

 

[Winnppl]

i think can be a capacitor smd in short i have a similar problem in the past and problem is A capacitor smd in short, not ic was a smd

I posted more info on compacitors that are shorting

 

[bombob]

I posted more info on compacitors that are shorting

Looks like u got shorts on the nvidia chips

Sent from my SM-N960U using Tapatalk

 

[Winnppl]

on Tronicsfix video he is having the same spots shorts as me, he changed out the PI3USB IC and that fixed his. I ordered two of the chips too see if that fixes the issue.

--------------------- MERGED ---------------------------

on Tronicsfix video he is having the same spots shorts as me, he changed out the PI3USB IC and that fixed his. I ordered two of the chips too see if that fixes the issue.

 

[bombob]

on Tronicsfix video he is having the same spots shorts as me, he changed out the PI3USB IC and that fixed his. I ordered two of the chips too see if that fixes the issue.

--------------------- MERGED ---------------------------

Those 3 IC are the cause of most shorts.Try desolder them and see if the shorts go away

Sent from my SM-N960U using Tapatalk

 

[Winnppl]

Those 3 IC are the cause of most shorts.Try desolder them and see if the shorts go away

Sent from my SM-N960U using Tapatalk

Will do, Thanks for your help