Toggle sidebar

Hacking SWITCH NOOB PARADISE - Ask questions here

  • Thread starter Thread starter APartOfMe
  • Start date Start date
  • Views Views 6,248,966
  • Replies Replies 48,066
  • Likes Likes 66
I've been banging my head on the wall for 3 days. I have a Fully working 200GB SD card with Atmosphere 1.8.0 and Firmware 19.0.1. When I backup the emuMMC following the switch hacks guide and move the files over to a 1TB SD and then restore the emuMMC again as per the guide. Nothing will launch when booting from the 1TB. it boots but I get the This software cant run error message and can't even run the homebrew menu. Any ideas? There are 2 emuMMC Partitions on the old SD card but there only seems to be one emuMMC is there any way to tell for sure?
 
Last edited by Ljroch,
  • Like
Reactions: Skv0ra
Ljroch said:
I've been banging my head on the wall for 3 days. I have a Fully working 200GB SD card with Atmosphere 1.8.0 and Firmware 19.0.1. When I backup the emuMMC following the switch hacks guide and move the files over to a 1TB SD and then restore the emuMMC again as per the guide. Nothing will launch when booting from the 1TB. it boots but I get the This software cant run error message and can't even run the homebrew menu. Any ideas? There are 2 emuMMC Partitions on the old SD card but there only seems to be one emuMMC is there any way to tell for sure?
Click to expand...
Are you using RAW Partition based EmuNAND or File based one?
Post automatically merged:

Ljroch said:
I've been banging my head on the wall for 3 days. I have a Fully working 200GB SD card with Atmosphere 1.8.0 and Firmware 19.0.1. When I backup the emuMMC following the switch hacks guide and move the files over to a 1TB SD and then restore the emuMMC again as per the guide. Nothing will launch when booting from the 1TB. it boots but I get the This software cant run error message and can't even run the homebrew menu. Any ideas? There are 2 emuMMC Partitions on the old SD card but there only seems to be one emuMMC is there any way to tell for sure?
Click to expand...
Well no answer but I am almost sure you are missing some part of the migration of data from a card to a new one

https://switch.hacks.guide/extras/transfer_sd.html


if you are using a raw nand partition you can use EmuTool to backup it and restore in another card https://gbatemp.net/threads/emutool...r-sd-switch-emu-type-on-sxos-and-more.550756/

Also I do recommand to convert any Raw partition based partition to file based one also using EmuTool
 
Last edited by impeeza,
  • Like
Reactions: Skv0ra and Blythe93
Ljroch said:
I've been banging my head on the wall for 3 days. I have a Fully working 200GB SD card with Atmosphere 1.8.0 and Firmware 19.0.1. When I backup the emuMMC following the switch hacks guide and move the files over to a 1TB SD and then restore the emuMMC again as per the guide. Nothing will launch when booting from the 1TB. it boots but I get the This software cant run error message and can't even run the homebrew menu. Any ideas?
Click to expand...

impeeza said:
Are you using RAW Partition based EmuNAND or File based one?
Post automatically merged:


Well no answer but I am almost sure you are missing some part of the migration of data from a card to a new one




if you are using a raw nand partition you can use EmuTool to backup it and restore in another card

Also I do recommand to convert any Raw partition based partition to file based one also using EmuTool
Click to expand...

That's the guide I've been following and it is a partition based emuMMC, thanks for that tool I will use that as a backup if this next attempt fails. Thank you for the info!
 
Ljroch said:
That's the guide I've been following and it is a partition based emuMMC, thanks for that tool I will use that as a backup if this next attempt fails. Thank you for the info!
Click to expand...
I do recommend to backup your current EmuNAND to a set of files, then on the new SD card copy that files to SDMC:/emuMMC folder and use Hekate to select that new Emunand File based, you will loose nothing and will gain a very easy backup of your EmuNAND.


https://gbatemp.net/threads/ultimate-guide-to-upgrade-your-firmware-atmosphere.661148/post-10511348

and do not forget to move the nintendo folder to the new emunand folder.
 
  • Like
Reactions: Skv0ra and Blythe93
impeeza said:
Are you using RAW Partition based EmuNAND or File based one?
Post automatically merged:


Well no answer but I am almost sure you are missing some part of the migration of data from a card to a new one




if you are using a raw nand partition you can use EmuTool to backup it and restore in another card

Also I do recommand to convert any Raw partition based partition to file based one also using EmuTool
Click to expand...
OK so I followed the guide you linked to the letter, backed up the emuMMC partition, transferred everything from the old sd card to the new one, restored the emuMMC, everything completes with out error. I can boot into the emuMMC perfectly. But when I try to launch tinfoil or boot the homeBrew menu I get Unable to start software, return to home menu and try again. i've seen screenshots of a Sys-patch overlay but I haven't found any instructions on how to view that. I'm assuming it's a Sigpatch issue but even recopying the sig-patches and sys-patch does not seem to sort it out.

OK update I figured out the overlay and Sys-patch is showing on and green across the board but still no joy. I did find the system time was wrong and update that. Still no joy.

Under Sysmodules in the overlay I see sys-patch and it's off. If I toggle it on it turns off after about a second.

Looks like it does the same thing on the working SD so that can't be it.

I've read that custom themes can mess with an update. Could they also mess with a transfer, and would it mess it up like this?
 
Last edited by Ljroch,
  • Like
Reactions: THYPLEX
Ljroch said:
OK so I followed the guide you linked to the letter, backed up the emuMMC partition, transferred everything from the old sd card to the new one, restored the emuMMC, everything completes with out error. I can boot into the emuMMC perfectly. But when I try to launch tinfoil or boot the homeBrew menu I get Unable to start software, return to home menu and try again. i've seen screenshots of a Sys-patch overlay but I haven't found any instructions on how to view that. I'm assuming it's a Sigpatch issue but even recopying the sig-patches and sys-patch does not seem to sort it out.
Click to expand...
yes may be you are missing sys-patch download latest one from https://gbatemp.net/download/sys-patch-sysmodule.38936/ and you can get help about that on https://gbatemp.net/threads/sys-patch-sysmod-that-patches-on-boot.633517/


for overlay you must have Tesla and Overlay Menu (or Ultrahand) working, more information on https://gbatemp.net/threads/tesla-the-nintendo-switch-overlay-menu.557362/page-72#post-10121629

the information of SYS-Patch shown by the overlay is the file sdmc:/config/sys-patch/log.ini

and the config of sys-patch is on the file sdmc:/config/sys-patch/config.ini
 
Last edited by impeeza,
  • Like
Reactions: Skv0ra and Blythe93
Ljroch said:
OK so I followed the guide you linked to the letter, backed up the emuMMC partition, transferred everything from the old sd card to the new one, restored the emuMMC, everything completes with out error. I can boot into the emuMMC perfectly. But when I try to launch tinfoil or boot the homeBrew menu I get Unable to start software, return to home menu and try again. i've seen screenshots of a Sys-patch overlay but I haven't found any instructions on how to view that. I'm assuming it's a Sigpatch issue but even recopying the sig-patches and sys-patch does not seem to sort it out.

OK update I figured out the overlay and Sys-patch is showing on and green across the board but still no joy. I did find the system time was wrong and update that. Still no joy.
Ljroch said:
OK so I followed the guide you linked to the letter, backed up the emuMMC partition, transferred everything from the old sd card to the new one, restored the emuMMC, everything completes with out error. I can boot into the emuMMC perfectly. But when I try to launch tinfoil or boot the homeBrew menu I get Unable to start software, return to home menu and try again. i've seen screenshots of a Sys-patch overlay but I haven't found any instructions on how to view that. I'm assuming it's a Sigpatch issue but even recopying the sig-patches and sys-patch does not seem to sort it out.

OK update I figured out the overlay and Sys-patch is showing on and green across the board but still no joy. I did find the system time was wrong and update that. Still no joy.

Under Sysmodules in the overlay I see sys-patch and it's off. If I toggle it on it turns off after about a second.
Click to expand...
Click to expand...

impeeza said:
yes may be you are missing sys-patch download latest one from and you can get help about that on


for overlay you must have Tesla and Overlay Menu (or Ultrahand) working, more information on

the information of SYS-Patch shown by the overlay is the file sdmc:/config/sys-patch/log.ini

and the config of sys-patch is on the file sdmc:/config/sys-patch/config.ini ftp://[email protected]:21/
Click to expand...
OK update I figured out the overlay and Sys-patch is showing on and green across the board but still no joy. I did find the system time was wrong and update that. Still no joy.

Under Sysmodules in the overlay I see sys-patch and it's off. If I toggle it on it turns off after about a second.

Looks like it does the same thing on the working SD so that can't be it.

I've read that custom themes can mess with an update. Could they also mess with a transfer, and would it mess it up like this?
Post automatically merged:

impeeza said:
yes may be you are missing sys-patch download latest one from
Click to expand...

impeeza said:
and you can get help about that on


for overlay you must have Tesla and Overlay Menu (or Ultrahand) working, more information on

the information of SYS-Patch shown by the overlay is the file sdmc:/config/sys-patch/log.ini

and the config of sys-patch is on the file sdmc:/config/sys-patch/config.ini ftp://[email protected]:21/
Click to expand...
I've verified both log.ini files for sys-patch are identical. still no joy
Post automatically merged:

noncasigchk_new=Unpatched
nocntchk=Skipped
nocntchk2=Unpatched
[ldr]
noacidsigchk=Patched (file)
[es]
es1=Skipped
es2=Skipped
es3=Patched (file)
[nifm]
ctest=Patched (file)
[nim]
nim=Patched (sys-patch)
[ssl]
disablecaverification1=Disabled
disablecaverification2=Disabled
disablecaverification3=Disabled
[stats]
version=1.5.5-32c7757
build_date=04.12.2024 17:05:00
fw_version=19.0.1
ams_version=1.8.0
ams_target_version=0.1.0
ams_keygen=18
ams_hash=c6014b53
is_emummc=1
heap_size=4096
buffer_size=4096
patch_time=0.167s

I even tried enabling the CAverification to see if that made a difference but no change.

I've reloaded freash copies of Sys-patch and sig-patches and no change
 
Last edited by Ljroch,
Ljroch said:
Under Sysmodules in the overlay I see sys-patch and it's off. If I toggle it on it turns off after about a second.
Click to expand...
That is the normal behavior of sys-patches, load at startup, modify the memory and closes.
Ljroch said:
I've read that custom themes can mess with an update. Could they also mess with a transfer, and would it mess it up like this?
Click to expand...
Nop, they only can cause your console to not load.
 
  • Like
Reactions: Skv0ra, nugget7069 and Blythe93
impeeza said:
That is the normal behavior of sys-patches, load at startup, modify the memory and closes.

Nop, they only can cause your console to not load.
Click to expand...

Any other ideas? I feel like this should be working but just isn't.
Post automatically merged:

I gave up on the transfer and rebuilt a file based emuMMC from scratch and it's working great.
 
Last edited by Ljroch,
Hello,
is there a homebrew app that would let me set a playtime limit ?
i tried aylz10/Reset-Parental-Controls-NX from a gh repo

had to recompile it since the latest release doesn't contain what I want. I'm a developer but I have no idea what libnx library and pctl methods do what are the correct arguments. It would take time modify the code of the app from earlier. So I want to know if there's a any homebrew app that does what I want asap.

Thank you
 
I think I messed up attempting to flash Android onto my Switch. I did the flash, performed the install, and now HOS no longer boots. Says pkg1 not found or something. How bad did I fuck up? Might this be an easy fix or do I have to restore from an old backup? I would hate to lose my progress in certain games I have on emuMMC.
Post automatically merged:

Yep I messed up royally and flashed Android and there wasn't a partition for it. I had one at one time but must've removed it. So now I have Android installed on the root folder and emuMMC not loading up. I tried doing UMS with the emu RAW GPPbut it says "Error mounting SD card!"
Post automatically merged:

Nm tried to restore emuMMC boot0 and boot1, SD card is now corrupted. Looks like I'm starting over.
 
Last edited by WizardWell,
Hey,

I’ve got a modded Lite, I’m looking to sell it on and I’ve not updated it in a while. I wanted to remove my user account from the OFW side, it wouldn’t let me until I updated the firmware. Stupid I know but I went ahead and done the update, now my CFW won’t boot. Hoping I can fix this with a simple Atmo update?
 
trakker1 said:
Hey,

I’ve got a modded Lite, I’m looking to sell it on and I’ve not updated it in a while. I wanted to remove my user account from the OFW side, it wouldn’t let me until I updated the firmware. Stupid I know but I went ahead and done the update, now my CFW won’t boot. Hoping I can fix this with a simple Atmo update?
Click to expand...
YES, you should upgrade Atmosphère BEFORE upgrade firmware follow the guide https://gbatemp.net/threads/ultimate-guide-to-upgrade-your-firmware-atmosphere.661148/
 
  • Like
Reactions: Skv0ra, Blythe93 and BigOnYa
Hi! It's been ages, GBAtemp. I can create a forum post in case it is recommended, but I thought I'd try here.

I was experiencing issues with my auto-rcm unpatched Switch and using ftpd, and upgraded the firmware to 19.0.0 sometime after upgrading Atmosphere without issues. I followed switch.hacks.guide to a T for sysCFW and I also installed sigpatches. Everything seems fine and runs okay without crashes since adding the sigpatches from Impeeza, except I cannot install NSPs no matter what method I try--Goldleaf, Awoo, TinWoo, Tinfoil, DBI. No nsp works. I've reformatted the SD to FAT32 twice, reinstalled Atmos, Hekate, and fresh sigpatches. Everything on my SD is fresh, nothing extraneous. Am I missing something essential? Any suggestions?

Error within Goldleaf is a 2002-4058, for reference
 
pwokk said:
Hi! It's been ages, GBAtemp. I can create a forum post in case it is recommended, but I thought I'd try here.

I was experiencing issues with my auto-rcm unpatched Switch and using ftpd, and upgraded the firmware to 19.0.0 sometime after upgrading Atmosphere without issues. I followed switch.hacks.guide to a T for sysCFW and I also installed sigpatches. Everything seems fine and runs okay without crashes since adding the sigpatches from Impeeza, except I cannot install NSPs no matter what method I try--Goldleaf, Awoo, TinWoo, Tinfoil, DBI. No nsp works. I've reformatted the SD to FAT32 twice, reinstalled Atmos, Hekate, and fresh sigpatches. Everything on my SD is fresh, nothing extraneous. Am I missing something essential? Any suggestions?

Error within Goldleaf is a 2002-4058, for reference
Click to expand...
Use SYS-Patch Sysmodule, BUT DO NOT UPGRADE TO FW 20 YET.
 
  • Like
Reactions: pwokk and Blythe93
Thought I'd chuck this here gor any insight as I'm going f****** mental! Trying to upgrade my sd card for migration.

Just tried my second 512gb sandisk sd card purchased from a reputable retailer and both times rufus and sd card formatter has killed them when trying to format to fat32. Windows refuses to see it unless in diskpart where it just throws cannot format or no device errors.


What the actual fuck? The card will show when inserted now however wants fornatted and will not do it! Is there anything else I can try to salvage this and what the fuck is going on with the unable to format errors??

Any and all enlightenment welcome!
 
Lostbhoy said:
Thought I'd chuck this here gor any insight as I'm going f****** mental! Trying to upgrade my sd card for migration.

Just tried my second 512gb sandisk sd card purchased from a reputable retailer and both times rufus and sd card formatter has killed them when trying to format to fat32. Windows refuses to see it unless in diskpart where it just throws cannot format or no device errors.


What the actual fuck? The card will show when inserted now however wants fornatted and will not do it! Is there anything else I can try to salvage this and what the fuck is going on with the unable to format errors??

Any and all enlightenment welcome!
Click to expand...
You can format it on Hekate, put only hekate on the card, start NYX and format inside hekate.

also after that use H2Testw (you can grab it from download section) to test your card.

Also MiniTool Partition Wizard is your pal.
 
  • Like
Reactions: Lumpofcoal, Skv0ra and Lostbhoy
impeeza said:
You can format it on Hekate, put only hekate on the card, start NYX and format inside hekate.

also after that use H2Testw (you can grab it from download section) to test your card.

Also MiniTool Partition Wizard is your pal.
Click to expand...
Should have done that rather than on pc. 🙈Scared to go back for another return now but will give that a go. 👍👍

Edit.... Meant to say thanks!
 
Last edited by Lostbhoy,
  • Like
Reactions: Lumpofcoal, Skv0ra and impeeza
Hi all,

Sorry for being a total beginner at this, but I've been troubleshooting for about 3 hours now.

About a month ago I got a modded switch working for my son using Atmosphere and Hekate and Arcropolis using sysMMC with a guide from gamebanana. Minimalist one.

However, this morning my son clicked update on something as he was starting Smash, and now when launching from Hekate, it says Unknown pkg1 version. HOS version is not supported.

I figured he updated the modded copy in the SD Card, and so I:
- copied in my SD Card backup, same problem
- deleted everything, unzipped fresh downloads (same versions) of Atmosphere and Hekate, same problem
- formatted the SD card again, copied in fresh copies of everything, same problem.

I'm not sure what else I can try, since there's no new versions of Atmosphere and Hekate to try.

Any advice appreciated!
Thanks.
 

Site & Scene News

Go to forum More news

Popular threads in this forum