Hacking SWITCH NOOB PARADISE - Ask questions here

[4ppleseed]

Hi, I recently wiped my hacked Switch. Deleted/formatted everything I could off the console and SD card. Now I'm regretting it because I don't have a profile that can log into the SNES emulator without going online. Is it possible to create/link to a profile again now? Thanks

 

[Draxzelex]

Using SX OS, If I put WiFi details in on sysNAND will they be also present in emuNAND? Do I need to delete them each time I change over to emuNAND? Again like many I’m wanting to play Pokemon Shield Cartridge online.

Once you create emuNAND, it acts independently of sysNAND.

Awesome! Thank you for bearing with me! That solution works fine as I was considering picking up a Switch Lite as well at some point, and my end goal is to be able to clone. So as long as I CAN have them and that save that owns them is a-ok, that's all that matters to me.
My ideal route I would go would be my main switch have a emuNAND for cfw stuff and would be the one to clone, my sysNAND would be my actual profile. And the Switch Lite would obviously just be another one of my actual profile on the main switch that I would go between.
And just to be sure, Nintendo can't read anything on an emuNAND as long as it is offline, correct? It basically acts as another switch inside the switch that is isolated?

Yeah you can just think of emuNAND as a second Switch. As long as it stays offline, Nintendo won't be any wiser.

Hi, I recently wiped my hacked Switch. Deleted/formatted everything I could off the console and SD card. Now I'm regretting it because I don't have a profile that can log into the SNES emulator without going online. Is it possible to create/link to a profile again now? Thanks

You will have to go online again.

 

[4ppleseed]

You will have to go online again.

Won't that get me banned?

I have a NAND back up. If I restore back to that will I be safe to go online?

 

[Inzaghi09]

Hello,

I just tried to check if my switch is hackable.

I went into RCM mode and injected the fusee_gelee.bin in RCM Tegra Gui.

The switch turned on but showed me the following:

"ERROR uSD: Failed to configure controller
"ERROR usD Failed to initialize the SDMMC Driver!
ERROR Fatal error: Failed to initialize the SD card

Press POWER to reboot.

I only had the switch in RCM when in injecting the payload. Do I need to have a micro sd card inserted? I didn`t find the fusee_test.bin, so I was injecting the fusee_atmosphere payload in RCM tegra gui.

What shall I do now? I was following the switch homebrew guide on another website

Can I insert my new and empty Micro sd Card or what shall I do?

When I press power the switch only restarts and shows me the same error as written earlier.

Thank you

 

[jftm999]

hi, I was able to follow the guide (nh-server.github) to install cfw, but whenever I try to launch Atmosphere FSS0 EmuMMC from Hekate, it gives Hekate's logo and goes back to Hekate. please help?

 

[The Evil Queen]

Greetings.

I have been trying to read and catch up on the scene since i've been gone for quite a while (since 3DS pokemon days). I have an unpatched switch that i am looking to make able to just edit my pokemon saves. What would be the easiest and safest way to do just that? I was reading that lineage is 100% ban proof? but does it provide a way to edit/copy my save to my sd so that i could edit it on my pc via pkhex?

 

[Draxzelex]

Won't that get me banned?

I have a NAND back up. If I restore back to that will I be safe to go online?

If your NAND backup is clean, meaning made before running CFW and homebrew, then you will be safe once you restore it.

hi, I was able to follow the guide (nh-server.github) to install cfw, but whenever I try to launch Atmosphere FSS0 EmuMMC from Hekate, it gives Hekate's logo and goes back to Hekate. please help?

Try following this guide

Greetings.

I have been trying to read and catch up on the scene since i've been gone for quite a while (since 3DS pokemon days). I have an unpatched switch that i am looking to make able to just edit my pokemon saves. What would be the easiest and safest way to do just that? I was reading that lineage is 100% ban proof? but does it provide a way to edit/copy my save to my sd so that i could edit it on my pc via pkhex?

While Lineage OS is ban-proof, it would not help you prevent getting banned when using PKHex. This is because you cannot load your modified save file with Lineage OS let alone dump it. The safest way is by having another Switch gen the Pokemon for you to trade over to the game you want.

 

[Skeet1983]

Hi guys. Here is where I am at:

My hackable Switch is currently on FW 5.0.1. I only have a SysNAND and only hacking I have done is save edits. I am wanting to upgrade FW to 9.0.1 or whatever it is through Choi. My mSD was in exFat format, and I reformatted it to Fat32. Right now, am backing up Nintendo directory to mSD card, and it is taking about 2 hours. Is this somewhat easy to do? I am following the sdsetup site and guide.

Update: I cancelled copying Nintendo directory to mSD card after Fat32 reformat, should I go back to exfat? If yes, what should I go with for Allocation size (32kb or 64kb)

ANY help is GREATLY appreciated

 

[LuigiXL]

Is there a thread for Android on Switch and subsequently the possibility of Project X Cloud (Xbox)? I can’t find any information. Thanks!

 

[The Evil Queen]

While Lineage OS is ban-proof, it would not help you prevent getting banned when using PKHex. This is because you cannot load your modified save file with Lineage OS let alone dump it. The safest way is by having another Switch gen the Pokemon for you to trade over to the game you want.

So instead I should get atmosphere with emuNAND and keep this unpatched switch offline while having a switch lite to actually do my online playing with while trading my genned mons from the other? If so, could you direct me to the most up to date guide on hacking my switch? I saw it when i first got on here again like a week ago and cannot find it >_<

Also, thank you for your time and advice.

 

[Draxzelex]

So instead I should get atmosphere with emuNAND and keep this unpatched switch offline while having a switch lite to actually do my online playing with while trading my genned mons from the other? If so, could you direct me to the most up to date guide on hacking my switch? I saw it when i first got on here again like a week ago and cannot find it >_<

Also, thank you for your time and advice.

The only guide I know of that sets you up with emuMMC is this one.

 

[jftm999]

so I was able to install several games, but when it comes to "fire emblem three houses", it stuck in the middle of installing using goldenleaf, and the PC itself freeze, had to force shutdown the PC? did anyone encountered this problem or the NSP is corrupted?

Edit: I was able to install Fire Emblem after using Fusee glee primary payload instead of Atmosphere in Hekate. Don't know why.

 

[yanvbraz]

So if I want to clean my SysNAND (I plan to use EmuNAND for CFW eventually) without leaving traces of CFW on it (I already commited the error of installing a NSP file on my SysNAND oops), would restoring the eMMC BOOT0 & BOOT1 and eMMC RAW GPP backups that I did before doing any alterations to SysNAND (i.e. as soon as I loaded Hekate for the first time) suffice to clean it completely, "avoiding bans"?

Is there any other precautions I should follow when doing this? Is there anything else I should restore to clean SysNAND?

 

[Adran_Marit]

So if I want to clean my SysNAND (I plan to use EmuNAND for CFW eventually) without leaving traces of CFW on it (I already commited the error of installing a NSP file on my SysNAND oops), would restoring the eMMC BOOT0 & BOOT1 and eMMC RAW GPP backups that I did before doing any alterations to SysNAND (i.e. as soon as I loaded Hekate for the first time) suffice to clean it completely, "avoiding bans"?

Is there any other precautions I should follow when doing this? Is there anything else I should restore to clean SysNAND?

Provided you didn't go online while modded (and made the backup before backup running cfw) then the clean backup is sufficient.

Just make sure they are in the appropriate folder.

Also when you setup the emunand use incognito + 90dns before you run games on it (they share the same prodinfo and cert as your original band)

 

[GigaManEXE]

Hey, so Pokemon has been out for a bit, and I want to use PKHeX. I'm gonna need to mod my Switch, but I don't know where I should begin. I bought a second Switch in January 2018 just for this purpose that is apparently hackable according to the information in the serial number thread. These are my Switch's details:

Serial: XAW100225
Serial on device matches serial on box: Yes
Region: USA
Firmware: 3.0.0
Color option: Neon Green & Neon Pink
Store: Walmart.com
Was a bundle (if yes, which): Splatoon 2 Wal-Mart-exclusive bundle
Purchase date: 1/28/18

I haven't been in the loop at all, so I want to make sure I know exactly what I'm doing.

 

[Draxzelex]

Hey, so Pokemon has been out for a bit, and I want to use PKHeX. I'm gonna need to mod my Switch, but I don't know where I should begin. I bought a second Switch in January 2018 just for this purpose that is apparently hackable according to the information in the serial number thread. These are my Switch's details:



I haven't been in the loop at all, so I want to make sure I know exactly what I'm doing.

Start with this guide

 

[StackMasher]

My brother's serial number starts with XKJ7 and I can't find if this indicates it can or cannot be hacked, which one is it?

 

[Draxzelex]

My brother's serial number starts with XKJ7 and I can't find if this indicates it can or cannot be hacked, which one is it?

https://gbatemp.net/threads/switch-...he-first-post-before-asking-questions.481215/

 

[Megadriver94]

1. What are the differences between CIAngel, Darkumbra and Tinfoil other than that the former is for the 3DS?

2. How long until the next Switch android update?

3. How do you USB install stuff on a Switch without having to take out the Micro SD card?

 

[Om3Ga1337]

How can i check if a switch is patched when my serial number is way way longer than on ismyswitchpatched.com?
This site has only 6 digits while my serial number has 11???